46
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
46
DESC: UnusedModel: Prontomatic 720-15 Serial #: K090F90Year of manufacture: 2017Rotary cold glue style machineWas going to run 12 oz. glass beer bottlesMaximum output: 19,800 BPH (330 BPM)15 label stationsContainer table pitch circle diameter: 28,35 inch (720 mm)Machine pitch: 5,93 inch (150,7 mm)Direction of operation: carousel after infeed, clockwise (from left to right)Machine layout configuration: linear arrangementLabeling station 1Used for front and neck labelType: cold glue labeling station 6-5-160 (N80)Gluing pallet carousel 6 pallet shaftsGripper cylinder 5 sectionsMax. label unwinding length 160 mmMin. label unwinding length 40 mmGripper cylinder diameter 264 mmCIP for labeling stationGluing: steel glue rollerControl cam: standard labeling station cam, dating area, centered: 70mm, without data checkLabeling station drive: Not disengage-ableGlue pump: UNIPUMP "H", 380 Watt with separate heater controlSpecial equipment Divided glue scraper, basic equipment, divided glue scraperLabeling station 2Used for back labelType: Cold glue labelling station 6-5-160 (N80)Gluing pallet carousel with 6 pallet shaftsGripper cylinder with 5 sectionsMax. label unwinding length 160 mmMin. label unwinding length 40 mmGripper cylinder diameter 264 mmCIP for labeling stationGluing with Steel gluing rollerDating/coding device Installation of dating/coding device 1 (laser coder)Control cam: standard labeling station cam, dating area, centred: 70mm, without data checkLabeling station drive Not disengage-ableGlue pump UNIPUMP "H", 380 Watt with separate heater controlCentering bells in special designContainer plates without centeringInfeed worm for cylindrical and special-shaped containersGuidance handling parts, straight passageDivided glue scraperStationary label magazineChange magazine for label magazineStandard gripper cylinder, 5 parts, d = 264 mmPallets - rubber-coatedShaftsBrushing-on/rolling-on (wet glue) for body/shoulder labelsBrushing-on/rolling-on (wet glue) for back labelBrushing-on/rolling-on (wet glue) for neck around/neck foil / champagne band / tamper evidentlabelsLabel InspectionManufacturer: KronesModel: CheckMat 752ESerial #: K752E94Year of manufacture: 2017Monitoring systemLabel inspection - basic equipmentIntelligent sensors for label inspection with type management, configuration via customer's computerInspection systems: Label inspectionLabel inspection for presence of the label.Label inspection design by sensor inspection. The label inspection on presence by sensor cannot be guaranteed for black or glossy labels.Rejection SystemsPusher for rejection of faulty containers onto a collection module for rejected containers (collection module not included)Customer-related expansionsRejection monitoring via light sensorCurrently setup for 12 Ounce Single Cold Glue Head Glass Beer Bottles / mdl: Prontomatic / sn: K090F90 / EquipNet.com Listing ID: 732940 / loc: San Francisco, CA 94107 / Handling Fee as noted in the terms, the cost to have the item ready in a lay dow area where it can be safely loaded: USD that will appear on your final invoice. / Dimensions: L x 0IN / W x 0IN / H x 0IN / Wt x 0LBS
For More Detailed Listing Information and to Learn more, please follow this link: https://www.equipnet.com/auctions/craft-brewing-auction/1132/
*Handling Fees - are noted in the description of each listing. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). This cost will be added to you final invoice. Packaging and Shipping are additional and can be provided by Logistics once your equipment invoice has been paid
Invoices will be sent via email, and you can view them in your MyEquipNet account (https://www.equipnet.com/myequipnet/).
If you are new to EquipNet, an account will be created for you and the username and password will be sent.
If you have an EquipNet account, be sure the Bidspotter information is the same or a new account will be created.
All auction registrants are required to be an EquipNet, Inc. member and have electronically agreed to the standard member terms and the specific member terms for buyers. Buyers who sign up for this event will have accounts created as agreeing to register. Bids submitted by non-EquipNet, Inc. members may be deemed invalid.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
DESC: UnusedModel: Prontomatic 720-15 Serial #: K090F90Year of manufacture: 2017Rotary cold glue style machineWas going to run 12 oz. glass beer bottlesMaximum output: 19,800 BPH (330 BPM)15 label stationsContainer table pitch circle diameter: 28,35 inch (720 mm)Machine pitch: 5,93 inch (150,7 mm)Direction of operation: carousel after infeed, clockwise (from left to right)Machine layout configuration: linear arrangementLabeling station 1Used for front and neck labelType: cold glue labeling station 6-5-160 (N80)Gluing pallet carousel 6 pallet shaftsGripper cylinder 5 sectionsMax. label unwinding length 160 mmMin. label unwinding length 40 mmGripper cylinder diameter 264 mmCIP for labeling stationGluing: steel glue rollerControl cam: standard labeling station cam, dating area, centered: 70mm, without data checkLabeling station drive: Not disengage-ableGlue pump: UNIPUMP "H", 380 Watt with separate heater controlSpecial equipment Divided glue scraper, basic equipment, divided glue scraperLabeling station 2Used for back labelType: Cold glue labelling station 6-5-160 (N80)Gluing pallet carousel with 6 pallet shaftsGripper cylinder with 5 sectionsMax. label unwinding length 160 mmMin. label unwinding length 40 mmGripper cylinder diameter 264 mmCIP for labeling stationGluing with Steel gluing rollerDating/coding device Installation of dating/coding device 1 (laser coder)Control cam: standard labeling station cam, dating area, centred: 70mm, without data checkLabeling station drive Not disengage-ableGlue pump UNIPUMP "H", 380 Watt with separate heater controlCentering bells in special designContainer plates without centeringInfeed worm for cylindrical and special-shaped containersGuidance handling parts, straight passageDivided glue scraperStationary label magazineChange magazine for label magazineStandard gripper cylinder, 5 parts, d = 264 mmPallets - rubber-coatedShaftsBrushing-on/rolling-on (wet glue) for body/shoulder labelsBrushing-on/rolling-on (wet glue) for back labelBrushing-on/rolling-on (wet glue) for neck around/neck foil / champagne band / tamper evidentlabelsLabel InspectionManufacturer: KronesModel: CheckMat 752ESerial #: K752E94Year of manufacture: 2017Monitoring systemLabel inspection - basic equipmentIntelligent sensors for label inspection with type management, configuration via customer's computerInspection systems: Label inspectionLabel inspection for presence of the label.Label inspection design by sensor inspection. The label inspection on presence by sensor cannot be guaranteed for black or glossy labels.Rejection SystemsPusher for rejection of faulty containers onto a collection module for rejected containers (collection module not included)Customer-related expansionsRejection monitoring via light sensorCurrently setup for 12 Ounce Single Cold Glue Head Glass Beer Bottles / mdl: Prontomatic / sn: K090F90 / EquipNet.com Listing ID: 732940 / loc: San Francisco, CA 94107 / Handling Fee as noted in the terms, the cost to have the item ready in a lay dow area where it can be safely loaded: USD that will appear on your final invoice. / Dimensions: L x 0IN / W x 0IN / H x 0IN / Wt x 0LBS
General delivery information available from the auctioneer
For More Detailed Listing Information and to Learn more, please follow this link: https://www.equipnet.com/auctions/craft-brewing-auction/1132/
*Handling Fees - are noted in the description of each listing. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). This cost will be added to you final invoice. Packaging and Shipping are additional and can be provided by Logistics once your equipment invoice has been paid
Invoices will be sent via email, and you can view them in your MyEquipNet account (https://www.equipnet.com/myequipnet/).
If you are new to EquipNet, an account will be created for you and the username and password will be sent.
If you have an EquipNet account, be sure the Bidspotter information is the same or a new account will be created.
All auction registrants are required to be an EquipNet, Inc. member and have electronically agreed to the standard member terms and the specific member terms for buyers. Buyers who sign up for this event will have accounts created as agreeing to register. Bids submitted by non-EquipNet, Inc. members may be deemed invalid.