440V 60 Hz, 2 x 4.6 Amps, 2 x 2.6 Kw, 2350 CFM, S/N20040879   A loading fee of $50 will be charged to the successful bidder

440V 60 Hz, 2 x 4.6 Amps, 2 x 2.6 Kw, 2350 CFM, S/N 20040842 A loading fee of $50 will be charged to the successful bidder – only flatbed trailers...

440V - 60 Hz, 4.6 amps, 2.6 kw, 1180 CFM, S/N 20040867 A loading fee of $50 will be charged to the successful bidder – only flatbed trailers will ...

S/N USA 36182 Drive Speed 1800rpm

2000 RPM/Min., 4kW, 1.6 N, 159 V, 15.7A S/N 9550091

10 HP, 215TC Frame, 1750 RPM, 230/460 Volt - 60 Hz, S/N C0013145-06/16-03

12 " x 18" Permanent Magnetic Chuck, 6" x 12" Permanent Magnetic Chuck, 12" x 24" Electromagnetic Chuck, 12" x 24" Electromagnetic Chuck, 12" x 24...

Models D046E 13744-B S/N 463876 & S/N 463877 A loading fee of $50 will be charged to the successful bidder 

Transformer Missing Tag A loading fee of $50 will be charged to the successful bidder

Transformer Missing Tag A loading fee of $50 will be charged to the successful bidder

480V Primary, 208/120 Secondary A loading fee of $50 will be charged to the successful bidder

460 V Primary, 460Y/266 Secondary A loading fee of $50 will be charged to the successful bidder

460 Primary, 460Y/266 Secondary A loading fee of $50 will be charged to the successful bidder

Missing Cover A loading fee of $50 will be charged to the successful bidder

Missing Cover A loading fee of $50 will be charged to the successful bidder

Missing Tag A loading fee of $50 will be charged to the successful bidder

15 KVA, 460V Primary, 460Y/266 Shielded Secondary A loading fee of $50 will be charged to the successful bidder

Mori Seiki CNC Machining Center Spindle, HSK-100, 10,000 RPM A loading fee of $50 will be charged to the successful bidder

With Magnetic Chip Seperator, 6P3-XL Gusher Pump, 230/480V, 60 HZ, S/N 721128

S/N LF225136, 230/400/460/575 Volts, 90/50.8/43.7/34.7 AMPS, 33.5 KW, 3 Phase, 60 Hertz A loading fee of $50 will be charged to the successful bid...

2001 Iemca Genius 120/37 Bar Feeder, CE Mark, 700 Kg A loading fee of $150 will be applied to the invoice of the winning bidder

Iemca Mini Boss 325 CNC/37 Bar Feeder S/N 9711102, CE Mark, 950 kg, 230 V, 7 Amp, 50 Hz A loading fee of $150 will be applied to the winning invoi...

Fanuc Power Mate Control, 30 Degrees, 30" Wheel, Dead Headstock, Marposs E39, Marposs Table Gauge, 14" Swing, 60" Center Distance, S/N LT908-2 A l...

Mass: up to 100 lbs, Diameter up to 18", Height up to 6", Power 460 Volts , 3 Phase, 60 Hz

Balancer

24" x 12" x 11.96" Grinding Wheel, 1400 RPM, AC380V, 50 Hz, 22kW Motor

CNC Cylindircal Grinding Machine Equipped with, Toyoda GC-50 Touchscreen control., Rotary dresser., In Process sizing gauging., Shoulder (Lateral ...

Mori Seiki MSC-502 CNC Control, 60 ATC, Through Spindle Coolant, Chip Conveyor, Mist Collector, Transformer, X Axis Travel 39.4", Y Axis Travel 33...

Mori Seiki MSC-502 CNC Control, 60 ATC, Through Spindle Coolant, Chip Conveyor, Mist Collector, Transformer, X Axis Travel 39.4", Y-Axis Travel 33...

X-axis 21.8", Z-axis 43.1", Turning length 40.2", Spindle bore 3.74", Turning speed 2800 rpm, Spindle motor power 30 kW

X-axis 21.8", Z-axis 43.1", Turning length 40.2", Spindle bore 3.74", Turning speed 2800 rpm, Spindle motor power 30 kW

Mazatrol 640T Control, Dual Spindle, Dual Turret, Tool Presetters, Load Table, 16.9" Turning Diameter, 24" Center Distance, 12" X-Axis Travel, 24"...

Mazatrol T32B, Turret Capacity: 8 Tools, Turret Travels (X,Z): 7.09"/20.08", Rapid Traverse Rate (X/Z): 1180 IPM

Maximum Machining Diameter 9.8", Spindle Bore 1.77", Maximum Bar Capacity 1.3", X - Axis Travel 7.5", Z - Axis Travel 14.6", Spindle Speeds to 600...

1996 S/N 1002 Max Turning Diameter: 17.7", Max Turning Length: 18.5", Max Bar Capacity: 2.67", Swing Over Bed: 20.5", X Axis Travel: 10.2", Z Axis...

1990 S/N 655 X-axis 10.2", Z-axis 19.7", Turning length 11.3" ,Turning speed 3000 rpm, Spindle motor power 11 kW

Mori MSX-850 CNC Control, Chuck, Tailstock with Center, Coolant System, Chip Conveyor, Y-Axis, 3" Bar Capacity, 36" Swing, 14" turning Diameter, 3...

1997 Fanuc Control, Chip Conveyor, Coolant System, Transformer, 24.4" Swing, 19.7" Machining Length, 10" Chuck, 2.6" Bar Capacity, S/N 161

1997 Fanuc Control, Chip Conveyor, Coolant System, Transformer, 24.4" Swing, 19.7" Machining Length, 10" Chuck, 2.6" Bar Capacity, S/N 177

Fanuc Control, Chip Conveyor, Coolant System, Transformer, 24.4" Swing, 19.7" Machining Length, 10" Chuck, 2.6" Bar Capacity, S/N 688

Max Turning Diameter: 16.5", Swing Over Bed: 24.4", Spindle Motor: 30 hp, Spindle Speed Range: 28-3000 RPM, Feed Range: 0.1-400 IPM, X-Axis Rapid ...

Max Turning Diameter: 16.5", Swing Over Bed: 24.4", Spindle Motor: 30 hp, Spindle Speed Range: 28-3000 RPM, Feed Range: 0.1-400 IPM, X-Axis Rapid ...

14.17" Max. Turning Dia., 12-Tool Turret, Okuma OSP5020L CNC Control, Power Tailstock, Chip Conveyor, S/N 9508

14.17" Max. Turning Dia., 12-Tool Turret, Okuma OSP5020L CNC Control, Chip Conveyor, S/N 9499

Okuma OSP-P200L Control, Chip Conveyor, Steady Rest, Tailstock W/Center, 12-Position Turret, 24" 4-Jaw Chuck, 480Volt, X-Axis Travel: 17", Z-Axis ...

4-Axis, 22 kW, 6000 RPM, 210mm X, 120 mm Y, 350 mm Z, S/N

4-Axis, 22 kW, 6000 RPM, 210mm X, 120 mm Y, 350 mm Z, S/N

Max. Headstock Stroke 250mm/9.84", Main Spindle Speed: 200 - 6,000 rpm, Sub Spindle Speed: 200 - 7,000 rpm, Main Spindle Motor: 7.5 / 11kW S/N 134

Max. Headstock Stroke 250mm/9.84", Main Spindle Speed: 200 - 6,000 rpm, Sub Spindle Speed: 200 - 7,000 rpm, Main Spindle Motor: 7.5 / 11kW S/N 1052

Fanuc 21iTB CNC Control, Coolant System, Mist Collector, Chip Conveyor, 16.5" Table Diameter, 24" Swing, 35 HP Spindle, 3,000 RPM, 10.6" X-Axis, 1...

Fanuc 21iTB CNC Control, Coolant System, Mist Collector, Chip Conveyor, 16.5" Table Diameter, 24" Swing, 35 HP Spindle, 3,000 RPM, 10.6" X-Axis, 1...

300 mm X& Z Axis, 250 mm Y Axis,   Cost to Load $1200, Loading charge will be applied to winners invoice. Machine must be loaded 7/7 - 7/8 or will...

Fanuc 18T CNC Control, 50 Taper, 12-Position Turret, 36 Position Tool Changer, Mist Collector, (4) 28" Chuck Pallet Shuttle, Chip Conveyor, 29.53"...

Fanuc 18T CNC Control, Coolant System, 40 Position ATC, 50 Taper, Chip Conveyor, Hydraulic System, 30" 3-Jaw Chuck, 36" Table Diameter, 40" Swing,...

Fanuc Series 18-T Control, #50 Taper, 36-Tool ATC Chip Conveyor, Mist Collector W/(4) 28" Chuck Pallet Shuttle System, Box Ways, S/N 65036   Loadi...

Fanuc Series 18-T Control, #50 Taper, 36-Tool ATC Chip Conveyor, Mist Collector W/(4) 28" Chuck Pallet Shuttle System, Box Ways, S/N 65034 Loading...

Fanuc 18T CNC Control, Coolant System, 40 Position ATC, 50 Taper, Chip Conveyor, Hydraulic System, 30" 3-Jaw Chuck, 36" Table Diameter, 40" Swing,...

Fanuc Series Oi-TF Control, Chip Conveyor, Coolant System, Live Tools, 35" Swing Over Bed, 32.68" Maximum Turning Diameter, 31.5" Maximum Turning ...

Fanuc Series Oi-TF Control, Chip Conveyor, Coolant System, Live Tools, 35" Swing Over Bed, 32.68" Maximum Turning Diameter, 31.5" Maximum Turning ...

Fanuc 31iA5 Control, Full B-Axis Milling Head, Live Tooling on Turret, 15" SMW Chucks, Scale Feedback on X & Xi, Dual Ball Screws on X, Chip Blast...