Information Lot DESC: ABSOLUTE AUCTION being offered by GW Kittrell Auctions via ONSITE, ONLINE AND CONFERENCE LINE on Thursday, February 27, 2025...

Titled Vehicles DESC: Once your payment is received and clears our bank, you will be contacted to confirm your information regarding the title reg...

Preview and Inspection DESC: Buyers are responsible to do their own inspection of equipment to determine the condition and usefulness of the items...

Information Regarding Loadout DESC: Removal Deadline: BUYERS ARE RESPONSIBLE TO REMOVE AND LOAD ALL ITEMS PURCHASED. Loadout of smalls and uninsta...

Rigging Information DESC: Rigging is the responsibility of the buyer. All contractual agreements are made between the buyer and a rigger. ÿ P...

Payment Information DESC: All payment are due immediately upon receipt of your invoice. Payment Terms: 10% onsite buyer's premium, 13%-15% online ...

Sales Tax DESC: THIS SALE IS SUBJECT TO NORTH CAROLINA SALES TAX. NC- 7% PLEASE PROVIDE TAX EXEMPT INFORMATION PROIR TO AUCTION DAY INFO@GWKITTREL...

20' 4 Strand Log Deck DESC: 1st Lot of Entirety, gear reduction drive, H-84 chain, air operated, 4 arm stop & loader, steel supports to the ground...

25' 3 Strand Log Deck DESC: Part of Entirety, gear reductions drive, H-84 chain, air operated, 3 arm stop & loader, steel supports to the ground, ...

16' Endwise Log Trough DESC: Part of Entirety, cat walk to stairs, 3 steel supports as marked, motor & gear reduction drive, no motor controls. 11...

26' Endwise Log Trough DESC: Part of Entirety, Motor & gear reduction drive, 110 ladder back chain, steel support to 1st cross beam only, not to g...

Cambio 30" Debarker DESC: Part of Entirety (SN: 30AM210), 75 HP main motor, motor controls attached, includes outfeed rubber tire hold down with g...

11' Infeed Endwise Log Trough DESC: Part of Entirety, to the Debarker, motor & gear reduction drive, air bag lift, steel supports to ground as mar...

36' Outfeed Rollcase DESC: Part of Entirety, with (14) 24" hourglass rolls, (2) sets of 4 arm kickers, air operated, motor & gear reduction drive.

Approx. 95' Bark Conveyor DESC: Part of Entirety, under the Debarker system. No support steel, 110' ladderback chain, motor & gear reductions driv...

8x10' Operators Cab DESC: Part of Entirety, at the Debarker to include push button operator station and motor controls center, supports to ground,...

Steel Cart Walk and Stairs DESC: Part of Entirety, at the Debarker system only as marked.

Debarker System Entirety DESC: Sum of Lots 25-34 with a 10% raise to open the bid for all items in entirety.

25' Bark Waste Conveyor DESC: 110 Ladderback chain, motor & gear reduction drive, no motor controls, 2 support legs only.

37' 4 Strand Log Deck DESC: 15' wide, 4 arm stop & loader, H-78 chain, motor & gear reduction drive, steel supports to the ground, no motor contro...

Forono C Frame Chipping Scragg DESC: (2) 150 HP motor, 6 knife chipping head, air set, includes control cab and controls in cab, supports to the f...

85' x32' Belt Conveyor DESC: from Scragg towards Gang System, 6x2" support legs only, but not the one supporting stair to sawmill as marked no sal...

20' Rollcase DESC: with (6) 24x8" spiral rolls, no drive and no support steel.

25' 4 Strand Log Deck DESC: with 6" roller type cleated chain for log haul up. 13'6" wide, 4 arm stop & loader, motor and gear reduction drive, st...

20' Endwise Log Trough DESC: motor & reductions drive, supports to cross beams only. No motor controls.

MDI TWA 2000 Log Metal Detector DESC: 40" high & 48" wide, has 13'x36" wide belt conveyor, steel supports to the ground includes controls as marke...

21' Rollcase DESC: with 8-24" hourglass rollcase, 2 way log kicker system, 4 legs supports to ground, motor & Dodge speed reducer, no motor contro...

Salem 3 Head Block 36" Lineal Position Carriage DESC: 1st Lot of Entirety, 16' carriage, Yieldmaster scanning carriage optimizer includes all carr...

Sale Bar Type Log Turner DESC: Part of Entirety. Includes control valve at cab, lever in cab. No hydraulic supply.

Salem Chipping Slabber DESC: Part of Entirety. 8 knife, lineal position, hyd. set, approx. 100 HP motor, no motor controls

Tyrone Berry SMA 280-C DESC: Part of Entirety. G1087 (SN: 50234-3) 150 HP motor includes controls in cab, no main motor controls.

12x6 Control Cab with Steps DESC: Part of Entirety.

Salem 40 HP Hydraulic Power Unit DESC: Part of Entirety.

Salem 3 HB 36" Lineal Position Carriage Entirety DESC: Sum of lots 48-53 with a 10% raise to open the bid for all items in entirety.

Salem 45' 4 Strand Log Deck DESC: 4 arm stop & loader, 14'6" wide, 20 HP motor & gear reduction drive, steel supports to floor, no motor controls ...

Chain Hoist at Sawyers Cab DESC: .

Salem 6' Band Mill DESC: with slat bed of bearer, air strain, motorized guide, no main motor.

200 HP 890 RPM Electric Motor DESC: no motor controls.

20' Sawdust Conveyor DESC: under that band mill, 110 ladder back chain, motor & reduction drive, no motor controls.

23' Chip Conveyor DESC: under the slab saw, 110 ladder back chain, motor & reduction drive, no motor controls.

Old Hydraulic Pack DESC: under head saw, not connected, condition unknown, approx. 5 HP.

52' Main Rollcase DESC: (20) 30x8" rolls, air stops & air kicker, motor & reduction drive, no motor controls, with 16' air operated cant slab dump...

Salem 6' Band Line Bar Resaw DESC: 1st Lot of Entirety. (SN: 146362-90), 8' line bar hydraulic Set, motorized guide, air strain includes Salem hyd...

200 HP 870 RPM Electric Motor DESC: Part of Entirety. No motor controls.

Salem 23'x12.5' 4 Strand Transfer Deck DESC: Part of Entirety. H-78 chain, 4 arm loading, motor & gear reduction drive, no motor controls.

Salem 18' Infeed Rollcase DESC: Part of Entirety. (6) 30x10" live rolls, cant turner with foot controls

50' Outfeed Rollcase DESC: Part of Entirety. From resaw (19) 36"x8" rolls, 14' cant lift and slide to runaround, motor and gear reduction drive.

5 Strand Transfer DESC: Part of Entirety. To return rollcase, H-78 chain, 5 arm kicker, motor & reduction drive, no motor controls, support to mil...

34' Return Rollcase DESC: Part of Entirety. (12) 24x8" rolls, motor & reduction drive, support to mill floor, no motor controls.

Salem 19'x13' 4 Strand Transfer Deck DESC: Part of Entirety. Back to infeed, 3 strand H-78 Roof top & 1 strand H-78 chain, motor & reduction drive...

Salem Resaw Entirety DESC: Sum of Lots 66-74 with 10% raise to open the bid for items in entirety.

25' Sawdust Conveyor DESC: under resaw, 110 ladder back chain, motor and reduction drive, no motor controls.

48' Squirrel Type Blower DESC: Approx. 5 HP motor under mill at Tyrone.

Salem 28' x20' 9 Strand Strip Transfer Deck DESC: under mill at resaw, motor & reduction drive, supports to ground, no motor controls.

Ukiah 8'x60" Bottom Arbor Thin Kerf Guide Saw Gang DESC: Splined shaft, includes 19' infeed hand off rollcase with cant positioner, 20' outfeed ro...

(33) 25" Splined Arbor Thin Kerf Saws DESC: next to gang. Also 9 guides includes wood cabinet.

(2) Spare Splined Arbors DESC: for Ukiah Gang. Next to gang.

(2) Metal Cabinets DESC: and contents at gang.

(3) Personnel Fans DESC: at gang.

11' 4 Strand Air Operated Pop Up Transfer Deck DESC: from main rollcase, roller chain, 4 arm stop, motor & reduction drive, no motor controls.