Refine your search
Primary Category
Category
- Planing (40)
- Other Industrial Supplies & Equipment (36)
- Handling & Packaging (23)
- Logging & Sawmill Equipment (20)
- Warehouse Equipment (13)
- Electrical Supplies (12)
- Saws (9)
- Machine Tools & Tools (8)
- Compressors (6)
- Pickup Trucks (6)
- Forklifts (5)
- Home & Furniture (4)
- Saws (4)
- Crushing & Conveying (3)
- Furniture (3)
- Grain Handling (3)
- Loaders (3)
- Machines (3)
- Surface Equipment (3)
- Auto Parts & Accessories (2)
- Heavy Duty Trucks (2)
- Kitchen Equipment (2)
- Landscaping (2)
- Mixers & Blenders (2)
- Pipes & Fittings (2)
- Recycling Equipment (2)
- Support Equipment (2)
- Tractors (2)
- Welders (2)
- Cell Phones & PDAs (1)
- Marine (1)
- Office furniture & supplies (1)
- Presses (1)
- Processing (1)
- Retail Fixtures (1)
- Trailers (1)
Brand
- HP (11)
- Industrial (11)
- Taylor (5)
- American (4)
- Ford (4)
- GE (4)
- Cummins (3)
- Master (3)
- Square D (3)
- Bobcat (2)
- Day (2)
- Gardner (2)
- Gardner Denver (2)
- Hyster (2)
- John Deere (2)
- Lincoln (2)
- Miller (2)
- Toshiba (2)
- BAY (1)
- Carolina (1)
- Comfort (1)
- DeWalt (1)
- Diehl (1)
- Eaton (1)
- Fontaine (1)
- Freightliner (1)
- Holtec (1)
- Hurst (1)
- Leeson (1)
- Line (1)
- Lock (1)
- Long (1)
- Ottawa (1)
- Prior (1)
- Siemens (1)
- Stihl (1)
- Sweed (1)
- Triangle (1)
- Webster (1)
- Yates (1)
Item Type
- Planer (40)
- Motor (23)
- Lumber (17)
- Bin (13)
- Conduit (10)
- Material Handling Attachment (10)
- Saw (10)
- Wire (10)
- Conveyor (9)
- Motor Control (9)
- Belt Conveyor (8)
- Roller (7)
- Truck (6)
- Air Compressor (5)
- Cart (5)
- Compressor (5)
- Forklift (5)
- Kiln (5)
- Blower (4)
- Electric Motor (4)
- Fork (4)
- Boiler (3)
- Breaker (3)
- Disconnect (3)
- Loader (3)
- Silo (3)
- Starter (3)
- Wrench (3)
- Bandsaw (2)
- Belt (2)
- Chain (2)
- Cyclone (2)
- Electric Panel (2)
- Filter (2)
- Grinder (2)
- Hammer (2)
- Hose (2)
- Knives (2)
- Log Fork (2)
- Oil (2)
- Rollcase (2)
- Strapping Cart (2)
- Table (2)
- Torch (2)
- Washer (2)
- Welder (2)
- Air Dryer (1)
- Air Lock (1)
- Auger (1)
- Band Chopper (1)
- Band Resaw (1)
- Barrel (1)
- Bunk (1)
- Cabinet (1)
- Card Holder (1)
- Catwalk (1)
- Chain Hoist (1)
- Chair (1)
- Chop Saw (1)
- Clock (1)
- Concrete Silo (1)
- Connector (1)
- Control Box (1)
- Cross beam (1)
- Day Cab (1)
- Divider (1)
- Drill (1)
- Drill Bit (1)
- Drill Press (1)
- Electrical Parts (1)
- Elevator (1)
- Gas Tank (1)
- Gear Motor (1)
- Grease Gun (1)
- Hand Pump (1)
- Hoist (1)
- Hopper (1)
- Horizontal Band Saw (1)
- Hose Clamp (1)
- Hydraulic Press (1)
- Knife (1)
- Knife Grinder (1)
- Oil Filters (1)
- Press (1)
- Press Frame (1)
- Profile Grinder (1)
- Pump (1)
- Rack (1)
- Racking (1)
- Refrigerated Air Dryer (1)
- Resaw (1)
- Rip Saw (1)
- Scaffolding (1)
- Scrap Steel (1)
- Shelf (1)
- Spotter Truck (1)
- Stair (1)
- Stand (1)
- Steel Table (1)
- Steel Wheels (1)
- Tool (1)
- Trailer (1)
- Unscrambler (1)
- Vise (1)
- Wheel Loader (1)
- Wheelbarrow (1)
State/Province
Town/City
- List
- Grid
-
232 item(s)/page
You can stop this auction sale. Complete operation of both locations available for $3.5 million. Contact Zach Kittrell if you have any interest. O...
Information Lot
ABSOLUTE AUCTION being offered by GW Kittrell Auctions via ONSITE, ONLINE AND CONFERENCE LINE on Thursday, February 27, 2025 and Friday February 2...
Titled Vehicles
Once your payment is received and clears our bank, you will be contacted to confirm your information regarding the title registration. Estimated t...
Preview and Inspection
Buyers are responsible to do their own inspection of equipment to determine the condition and usefulness of the items that they purchase. Preview ...
Removal Deadline: BUYERS ARE RESPONSIBLE TO REMOVE AND LOAD ALL ITEMS PURCHASED. Loadout of smalls and uninstalled equipment: Immediately upon a P...
Rigging Information
Rigging is the responsibility of the buyer. All contractual agreements are made between the buyer and a rigger. If you choose to rig your own equi...
Payment Information
All payment are due immediately upon receipt of your invoice. Payment Terms: 10% onsite buyer's premium, 13%-15% online buyers premium are in effe...
Sales Tax
THIS SALE IS SUBJECT TO NORTH CAROLINA SALES TAX. NC- 7% PLEASE PROVIDE TAX EXEMPT INFORMATION PROIR TO AUCTION DAY INFO@GWKITTRELLAUCTIONS.COM 93...
Tie Backs
System Tie Backs: Lot 501-504. Lot 506-509. Lot 512-522. Master Tie back will be Lots 501-526. All tie backs are the sum of the lots with a 10% ra...
8' 4 Arm Break Down System
(1st Lot of system tie back, 1st lot of Master tie back) to include 30' 4 Strand package deck, 81X chain, 15 HP Duradrive, 4 arm breakdown hoist, ...
10' 5 Strand Transfer Deck
(Subject to Tie Back), to planer feed includes 5 arm 3' tipple, motor & drive, supports to cross beams only. No motor controls.
85' x25" Belt Conveyor
(Subject to Tie Back) 12" deep sides, motor & reduction drive, disconnect as marked, no inlet wire or conduit included.
(Subject to Tie Back) with (3) foot controls.
Break Down System Tie Back
The sum of lots 501-504 with a 10% raise to open the bid for the system. Subject to master entirety tie back.
(1st lot of system tie back, subject to master tie back)12 knife, 4 head machine (SN: B29991) includes 50 HP main motor. Includes Planner MCC Pane...
(Subject to tie back) (SN: 29795), 20' overall length, has bushwhacker head, (3) 10 HP drives for each roll, hydraulic hold down with 7.5 HP hyd. ...
26'x25" Outfeed Belt Conveyor
(Subject to Tie Back) 12" sides, motor & reduction drive, disconnect attached.
(Subject to Tie Back) with drive disconnect as marked.
Planer System Tie Back
Sum of Lots 506-509 with a 10% raise to open the bid for the system. Subject to master entirety tie back.
(1st lot of system tie back, subject to master tie back) with 9 individually driven saws, "0" saw, 22" sawblades, infeed and pass through system t...
11' 4 Strand Deck
(Subject to Tie Back), for outside wood, C55 roof top chain, motor & reduction drive
(Subject to Tie Back), with drive, approx. 50' overall width, with drive, supports to floor.
New South 28 Bay Sling Sorter
(Subject to Tie Back), 20 HP hydraulic pack, controls attached and as marked, computer controls.
(Subject to Tie Back), 81X chain, 20 HP motor
21' 4 Strand Transfer Deck
(Subject to Tie Back), 81 X chain, motor and reduction drive.
4' 9 Strand Pit Unscrambler
(Subject to Tie Back), motor & reduction drive
Lunder 6' Dead Pile Stacker
(Subject to Tie Back), with new 20 HP hyd. supply and disconnects as marked.
25' 4 Strand Transfer Deck
(Subject to Tie Back), 81X chain, motor & reduction drive.
the sum of lots 512-521 with a 10% raise to open bid for system. Subject to Master Tie Back.
Square 600 Amp MCC Panel
No wire or conduit included, (Subject to Master Tie back)
Alan Bradley 800 Amp MCC Panel
No wire or conduit included, (Subject to Master Tie back)
Square D Amp Main (50)
for planer mill, no wire or conduit included. (Subject to Master Tie Back)
in New planer mill building. ( Subject to Master Tie Back)
sum of lots 501-526 with a 10% raise to open the bid for the complete entirety of lots.
Grizzly Destroyer Slow Grinder
with 12'x29" vibrating infeed, 75 HP main motor, motor controls as marked.
motor controls as attached.
Grutter Swing Arm Cut off Saw
Model 3402, with controls attached.
Diehl #75 Straight Line Rip Saw
motor controls as attached.
Koger Blower Model CCW-UP-81
28x28" outfeed, 32" diameter infeed, includes outfeed pipe to cyclone, no infeed dust pipe included. No main motor.
Siemens 150 HP Motor 1785 RPM
includes 400 amp disconnect, no starter, no wire or conduit
for blower motor, no wire or conduit included.
Main Dust Pipe
from planer mill to include all pipe in planer mill, 24" truck with damper air locks and stand, Clarke Back Draft.
Approx 30 Unit Shavings Bin
with 15 HP hydraulic supply, no motor controls
Approx 30 Unit Shavings Bin
no hydraulic supply (they share a hyd. Unit)
Holtec Package Cut Off Saw
25' bed and motor controls as marked, Stihl ES 121
8' 3 Arm Breakdown Hoist
to include 42' 3 strand package deck, 25'x12" stick conveyor with drives, no motor controls, does include push button and foot controls.
22' 5 Strand Transfer Deck
H-78 chain, gear motor drive, no motor controls
35'x20" Belt Conveyor
3 arm tipple, motor & reduction drive, transfer to resaw.
19' 5 Strand Deck
4 strands of 130 roof top chain, 1 strand H-78 chain, motor & reduction drive, no motor controls.
with double profile, 8 knife (SN: B29325), included planer starter panel, no main motor.
Genco AC/DC 50 HP Drive Motor
with Toshiba DC unit control box as marked.
F-30 (SN: 29327), 18' includes Yates American 12' powered bridge
Loading...-
232 item(s)/page