0
FULL CATALOG COMING SOON. REGISTER TODAY!
Passed
Nappanee, Indiana
0.00%
15.00%
Description
FEATURING:
2007 Wells Cargo tandem axle box trailer, 16’ L w/ cargo doors • Yale 5000 lb. LP gas
fork lift w/ pneumatic tires, model GLP050 s/nN854340, 48” forks, mast will go up 194” •
Exterior 20HP dual compartment w/ holding tank overhead dust collector • Approx. 2007
Accu-Systems model MMTJ-4 mortise-miter & Tenninging machine w/ Parker CTC windows
XP automation digital screen, dual zone • Ingersoll Rand model SSRUP6-25-125,
25HP rotary screw air compressor w/16,500 hrs, also includes Ingersoll Rand dry star hot
refrigerant dryer • Northtech model SET100/4XL, 24HP motor, 3 phase, 60 amp, 230V,
new in 2010, 3 head shaper, exterior edge sanding profile machine, s/nECF0807028 •
Semco model CEMCO1000 dual head 37” drum sander • Various down draft sanding
tables, one by Denray from 4x6 to 2x4 & 4x4 approx. • Northtech model NT-24-10HCVS
10 HP 3 ph, 230V, planer, new in 2008 • Powermatic model 72 approx. 10” floor model
table saw w/ Delta fence • Delta model RS15 floor model commercial 5 speed shaper •
Minimax power feed model 44, 3 ph • Whirlwind model 1000-L upcut chop saw • Tiger
stock CNC automatic tail stock feed • Ritter model R375VM s/n 3558, 4’x8’ pneumatic
clamp framing table • 3 phase custom built double end coping machine • Custom built
cabinet door crowning machine w/ hydraulic swing arm cylinder, pneumatic die clamp,
various profiling templates • Floor model Shapers 3 phase commercial w/1¼” spindles •
Northtech 3 phase power feeder • Hendricks saw panel saw model SZ-III, vertical panel
saw machine #P0257E, new in 1994 • Landcaster 2 way furniture clamping machine s/n
1861-C-464 w/ pneumatic clamp approx. 60” • Doucet model NWR-6 s/n 7006-09-285
door clamp machine • Good Powermatic model 66 approx. 10” floor model table saw,
3 phase w/ Powermatic T square fence • Approx. 14” Rockwell Delta floor model band
saw • Italian 1¼ spindle shaper • Holz 3 phase power feeder • Ritter model R-700 s/n
1148, 48” belt sander • Delta floor model spindle shaper • CR Onsrud model 3025 s/n
30517 5HP inverted pin router • 2- self dumping material fork lift hoppers • Quincy 20HP
V piston horizontal air compressor, currently not under power • Small portable Craftsman
table saw • Delta 16 ½” floor model drill press • Clayton oscillating spindle sander • Delta
12” compound laser miter chop saw • Varied amount of surface to 13/16” straight line,
ripped 1 edge, including cherry, oak, ash, maple & other various hardwoods • Small nylon
banding machine w/ tooling • Approx. 42” floor model industrial fan • Various smaller
electric chop saws • Varied small electric & pneumatic woodworking hand tools • Floor
model shop fans • Varied shop carts, some w/ casters • Material racks, mostly fixed arm
• Advantage model K01-4AM s/n 021, knife hinge slot cutting machine pneumatic drive
OFFICE EQUIPMENT
Good Konica Minolta Bizhub 200 • (2) 4-drawer Fireking fireproof file
cabinets & other 4-drawer file cabinets • Office chairs • GE water cooler
• Pyramid model 3500 timeclock
***** THIS LOT IS SOLELY FOR ADVERTISEMENT PURPOSES ONLY *****
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
FEATURING:
2007 Wells Cargo tandem axle box trailer, 16’ L w/ cargo doors • Yale 5000 lb. LP gas
fork lift w/ pneumatic tires, model GLP050 s/nN854340, 48” forks, mast will go up 194” •
Exterior 20HP dual compartment w/ holding tank overhead dust collector • Approx. 2007
Accu-Systems model MMTJ-4 mortise-miter & Tenninging machine w/ Parker CTC windows
XP automation digital screen, dual zone • Ingersoll Rand model SSRUP6-25-125,
25HP rotary screw air compressor w/16,500 hrs, also includes Ingersoll Rand dry star hot
refrigerant dryer • Northtech model SET100/4XL, 24HP motor, 3 phase, 60 amp, 230V,
new in 2010, 3 head shaper, exterior edge sanding profile machine, s/nECF0807028 •
Semco model CEMCO1000 dual head 37” drum sander • Various down draft sanding
tables, one by Denray from 4x6 to 2x4 & 4x4 approx. • Northtech model NT-24-10HCVS
10 HP 3 ph, 230V, planer, new in 2008 • Powermatic model 72 approx. 10” floor model
table saw w/ Delta fence • Delta model RS15 floor model commercial 5 speed shaper •
Minimax power feed model 44, 3 ph • Whirlwind model 1000-L upcut chop saw • Tiger
stock CNC automatic tail stock feed • Ritter model R375VM s/n 3558, 4’x8’ pneumatic
clamp framing table • 3 phase custom built double end coping machine • Custom built
cabinet door crowning machine w/ hydraulic swing arm cylinder, pneumatic die clamp,
various profiling templates • Floor model Shapers 3 phase commercial w/1¼” spindles •
Northtech 3 phase power feeder • Hendricks saw panel saw model SZ-III, vertical panel
saw machine #P0257E, new in 1994 • Landcaster 2 way furniture clamping machine s/n
1861-C-464 w/ pneumatic clamp approx. 60” • Doucet model NWR-6 s/n 7006-09-285
door clamp machine • Good Powermatic model 66 approx. 10” floor model table saw,
3 phase w/ Powermatic T square fence • Approx. 14” Rockwell Delta floor model band
saw • Italian 1¼ spindle shaper • Holz 3 phase power feeder • Ritter model R-700 s/n
1148, 48” belt sander • Delta floor model spindle shaper • CR Onsrud model 3025 s/n
30517 5HP inverted pin router • 2- self dumping material fork lift hoppers • Quincy 20HP
V piston horizontal air compressor, currently not under power • Small portable Craftsman
table saw • Delta 16 ½” floor model drill press • Clayton oscillating spindle sander • Delta
12” compound laser miter chop saw • Varied amount of surface to 13/16” straight line,
ripped 1 edge, including cherry, oak, ash, maple & other various hardwoods • Small nylon
banding machine w/ tooling • Approx. 42” floor model industrial fan • Various smaller
electric chop saws • Varied small electric & pneumatic woodworking hand tools • Floor
model shop fans • Varied shop carts, some w/ casters • Material racks, mostly fixed arm
• Advantage model K01-4AM s/n 021, knife hinge slot cutting machine pneumatic drive
OFFICE EQUIPMENT
Good Konica Minolta Bizhub 200 • (2) 4-drawer Fireking fireproof file
cabinets & other 4-drawer file cabinets • Office chairs • GE water cooler
• Pyramid model 3500 timeclock
***** THIS LOT IS SOLELY FOR ADVERTISEMENT PURPOSES ONLY *****
GEHL INDUSTRIES - WOODWORKING MACHINERY - FORKLIFT - TRAILER - HARDWOOD LUMBER RAW MATERIALS
Sale Date(s)
Venue Address
158 Airline Dr.
Nappanee
Indiana
46550
United States
For Hahn Auctioneers Inc. delivery information please telephone 574-536-7682.
Important Information
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.
- Available Monday – Friday, 8:00am – 12:00am ET.
- Email: Support@bidspotter.com
- Office: 253-858-6777
- Frequently Asked Questions
Terms and Conditions
TERMS & CONDITIONS:
1. All sales final. No bidder may retract a bid made during the sale for any reason.
2. Payment is due immediately upon completion of the Auction. All payments must be in the form of wire transfers, or certified funds unless other arrangements have been approved in advance of the auction. Credit Cards are subject to an additional 4% fee. Cash payments will be reported according to U.S. Federal Government Requirements.
3. All sales are "AS IS" and "Where Is". Bidder is responsible for inspections and verification of condition, authenticity, and completeness of any item purchased. No warranties or representations of any type whatsoever are made by Hahn Auctioneers, Inc. Statements printed in catalogs, brochures, online, signs, and verbal statements made by auctioneers or staff are representations made by the Seller and Hahn Auctioneers, Inc. has no obligation to verify or authenticate any such claims or representations. Any announcements made at the time of the sale supersede any earlier printed matter or statements.
4. Buyer is responsible for all risk of loss or damage immediately upon purchase of the item. All items purchased must be removed from the auction site at the buyer's expense by posted removal date. Removal DATE: 9am-3pm Eastern Thursday March 16th or by Appointment. If not removed by that day , Hahn Auctioneers, Inc. will remove the item with all costs of moving & storage to be paid by the buyer.
5. Final bid price does not include buyer's premium or applicable taxes on each lot. Buyer is responsible to pay all city, state or other taxes due on inventory for which the buyer does not qualify as exempt. Proof of exemption is
buyer's responsibility.
No lots may be removed until the conclusion of the Auction, although invoices are available for payment at any time. COMPLETE PAYMENT IS REQUIRED ON SALE DAY. NO EQUIPMENT OR RELATED ITEMS MAY BE REMOVED UNTIL COMPLETE PAYMENT IN FULL IS RECEIVED.
All items are offered AS IS, WHERE IS, WITHOUT WARRANTIES WHATSOEVER, WHETHER EXPRESSED, IMPLIED OR STATUTORY in units of measure as announced at the time of sale. No claim will be considered for allowance, adjustment or rescission of any sale based upon the failure of the property to correspond to any particular standards or expectations of the buyer. Our catalog and other advertising material are provided for continuity of the Auction. The description in the catalog or oral opinions are provided for informational purposes only. It is the responsibility of the buyer to ascertain, by his own means, the correctness of year and model and equipment options/accessories prior to bidding.
Persons attending are notified that an Auction Site is a potentially dangerous place. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at his or her own risk with notice of the condition of the premises.
