- List
- Grid
-
24 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Greenerd No. 2 Arbor Press mounted on stand (#1)
Greenerd No. 2 Arbor Press mounted on stand (#2)
AMERICAN CAN NO.3 KICK PRESS. NO FIXTURES OR TOOLING ...[more]
Rockford Model No. 8-R 8" Double End Grinder: 3/4 hp, 3,450 rpm, 60/1/110-220 volt, mounted on base,
Rockford Model No. 8-R 8" Double End Grinder: 3/4 hp, 3,450 rpm, 60/1/110-220 volt, mounted on base, wire brush wheel & buffing wheel
Craftsman Model 115-7397 Type CR 20E Double End Capacitor Pedestal Grinder: 1/3 hp, 3,450 rpm, 60/
Craftsman Model 115-7397 Type CR 20E Double End Capacitor Pedestal Grinder: 1/3 hp, 3,450 rpm, 60/1/115 volt, 6" wheel, ball bearings, work light....
Rockwell Model 438-02-314-0298 Double End Carbide Tool Grinder: mounted on pedestal, 1/2 hp, 3,450
Rockwell Model 438-02-314-0298 Double End Carbide Tool Grinder: mounted on pedestal, 1/2 hp, 3,450 rpm, 60/1/115-230 volt, type SCS, 6" wheel, 7" ...
Delta Model DB-23-505 Type SS Double End Carbide Tool Grinder: mounted on pedestal, 1/2 hp, 3,450
Delta Model DB-23-505 Type SS Double End Carbide Tool Grinder: mounted on pedestal, 1/2 hp, 3,450 rpm, 110 volt, 6" wheel, 7" x 13" tilting tables...
Kuhlmann Su 2 Cup Wheel Tool Grinder: s/n 31.0031; with 3 collets, worklight
JONES & LAMSON 14" MODEL PC-14 OPTICAL COMPARATOR: WITH CENTERS, PROJECTION, 10X, 20X & 48MM LENS, REFLECTION ATTACHMENTS, 4 EXTRA SCREENS-2 GLASS...
B&S 6" x 12" Surface Grinder: with B&S 6" x 10.5" permanent magnetic chuck, tilting vise.
Model 50-E O.B.I. Press: s/n K5NZ94; 1/3 hp, 10" x 6.5" bed with bolster, die set.
Tennsmith 48" Manual Bending Brake
Delta 4 Spindle In-Line Drill: s/n 17-5671; with 4 14" Delta Milwaukee drill heads mounted on a
Delta 4 Spindle In-Line Drill: s/n 17-5671; with 4 14" Delta Milwaukee drill heads mounted on a 58" production table with coolant through.
Horizontal Bandsaw: approx. 13" capacity,
Sunnen Model MBB-1290D-MS Precision Hone: s/n 16675; with coolant, worklight
Enco Model 91000 Drill/Mill: mounted on table, 7.5" x 22" t-slotted table, spindle speeds to 3,000
Enco Model 91000 Drill/Mill: mounted on table, 7.5" x 22" t-slotted table, spindle speeds to 3,000 rpm, 1 hp 60/1/110-220 electrics. ...[more]
Bridgeport 1/2 HP M Head Round Overarm Vertical Mill: s/n BH36398; with 9" x 42" table with Lyman Mk
Bridgeport 1/2 HP M Head Round Overarm Vertical Mill: s/n BH36398; with 9" x 42" table with Lyman Mk 4 power feed, spindle speeds from 275-4250 rp...
Bridgeport 1 HP J Head Ram Type Vertical Mill: s/n 12BR170311; with Newall DP7 2x DRO, 9" x 42"
Bridgeport 1 HP J Head Ram Type Vertical Mill: s/n 12BR170311; with Newall DP7 2x DRO, 9" x 42" table, spindle speeds from 80-2720 rpm, Mitutoyo d...
Sheldon 10" Model L-62 Quick Change Gear Engine Lathe: with collet chuck (3/4" capacity) quick
Sheldon 10" Model L-62 Quick Change Gear Engine Lathe: with collet chuck (3/4" capacity) quick release, 2 turret attachments, 3 steady rests, spin...
South Bend 13" x 20" Model 113A Quick Change Engine Lathe: s/n 163245; with 6" 3 jaw chuck, taper
South Bend 13" x 20" Model 113A Quick Change Engine Lathe: s/n 163245; with 6" 3 jaw chuck, taper attachment, 2 steady rests, tail stock, 10 3/4" ...
Clausing-Colchester 15" x 50" Engine Lathe: s/n F4/60663; with Newall Sapphire 2x DRO, spindle
Clausing-Colchester 15" x 50" Engine Lathe: s/n F4/60663; with Newall Sapphire 2x DRO, spindle speeds from 37 - 1500 rpm, threads from 4 - 112 TPI...
1995 Romi-Bridgeport 16" x 40" EZ-Path CNC Lathe: with EZ-Path P.C. based control, spindle speeds
1995 Romi-Bridgeport 16" x 40" EZ-Path CNC Lathe: with EZ-Path P.C. based control, spindle speeds from 37.5 to 3,000 rpm, 8" 3 jaw chuck, steady r...
Saylor-Beall 5 HP Model 705 Horizontal Tank Mounted Air Compressor: 2 stage, reciprocating, 3/60/
Saylor-Beall 5 HP Model 705 Horizontal Tank Mounted Air Compressor: 2 stage, reciprocating, 3/60/230-460 electrics.
Loading...-
24 item(s)/page