0
Full Catalog Posted! Niblock Machinery, Inc. - Complete Metal Working & Fabricating Repair Facility
1/10
Auctioneer has chosen not to publish the price of this lot
Elkhart, Indiana
7.00%
18.00%
Description
Niblock Machinery, Inc. - Complete Metal Working & Fabricating Repair Facility
Sale Day:
Doors Open at 8:30 AM, Sale Starts At 10:00 AM
Buyers Premium:
18% applies on all online purchases.
Inspection / Preview:
Tuesday, October 2, 2018, 9 AM - 4 PM (EST)
Removal / Pickup:
Thursday, October 4th - Friday, October 12th, By Appointment
Rigging / Transport:
See our list of approved riggers & transport companies
Sales Tax:
7.00% Without Proper Exemption
Major Asset ListSee Catalog for Complete Listing
Shears
Cincinnati ¼” x 10’ Model 1810 Shear, s/n 35371, 48” Front Operated Power Back Gauge
Adira ¼” x 10’ Model GHS-0630 Hydraulic Shear, s/n 3768/18011D (New 2000), 40” Front Operated Power Back Gauge
Famco 10 Gauge x 10’ Model 1010 Shear, s/n S-04865144, 24” Rear Operated Manual Back Gauge, 10’ Squaring Arm
Famco 18 Gauge x 72” Model E-12143 Shear, s/n S-F65WV03, 24” Manual Back Gauge
Famco 16 Gauge x 52” Model E-12039 Shear, s/n S-L67WV58, 16” Manual Back Gauge
Press & Apron Brakes
Lodge & Shipley 200/300 Ton Model S200A8 Press Brake, s/n 46042, 12”x10’ Bed, 4” Stroke, 12” Shut Height, Air Clutch
Niagara 150 Ton Model 150-8-10 Press Brake, 10’ Bed, Lower Die Holder, Hurco Autobend 7 Back Gauge
Dreis & Krump 150 Ton Model 1012R Press Brake. s/n C-15987, Ram & Bed Planed & Drilled for Angles, Lower Die Holder, Air Clutch (In Process of Rebuild)
Whitney Jensen 8’ Apron Bending Brake
Wheel Press
Elmes 500 Ton Model N3000 Hydraulic Wheel Press, s/n 11251, 12’ Length of Stress Bars, 72” Between Bars, 20” Ram Diameter, Spacer Plates
Presses
Federal 80 Ton No. 7 OBI Press, s/n 7-707, 7” Stroke, 19.5” Stroke, 28”x36” Bed, 75 SPM, Triad Brake Monitor, Air Clutch
L&J 45 Ton Model 45 OBI Press, s/n 41813, 2.5” Stroke, 15”x26-1/2” Bed, Air Clutch
Niagara 35 Ton Model M35 OBI Press, s/n 44980, 3” Stroke, 15”x24” Bed, Air Clutch, Palm Button Pedestal
Danly 25 Ton OBI Press, s/n 2552390164, 3” Stroke, 8-3/4” Shut Height, 12”x20” Bed, 150 SPM, Air Clutch
Perkins Model 194K Bench Press, s/n 36037, 2” Stroke, 6”x10” Bed, On Stand
Benchmaster Model BT-5 Bench Press, s/n DJG63858
Dake 150 Ton Model 3-150 H-Frame Hydraulic Press, s/n 163522, 44” Between Frame, 20” Bed Width
Dake 75 Ton Model 75H H-Frame Hydraulic Press, 44” Between Frame, 14” Bed Width
Lathes
Leblond 25”x84”/144” Sliding Bed Tool Room Lathe, s/n N11186, 24” 3-Jaw Chuck, 600 RPM, Inch Threading, Taper Attachment, Steady Rest
Lodge & Shipley 20”/24”x144” Toolroom Lathe, s/n 35367, 500 RPM, 18” 4-Jaw Chuck, Inch Threading, Taper Attachment
Lodge & Shipley 22”/25”x96” Toolroom Lathe, s/n n/a, 500 RPM, Inch Threading, Taper Attachment
Monarch 20”/22.5”X48” Toolroom Lathe, s/n 9482, 400 RPM, 12” 3-Jaw Chuck, Inch Threading, Taper Attachment
American 18”x60” Model Pacemaker Tool Room Lathe, s/n n/a, 1500 RPM, 12” 4-Jaw Chuck, Inch Threading
Cincinnati 18”x54” Tool Room Lathe, s/n 1W4H5L-86, 980 RPM, 12” 3 Jaw Chuck, Inch Threading, Steady Rest
South Bend 10”x24” Tool Room Lathe, 3-Jaw Chuck, Inch Threading
Fisher Oil Grooving Lathe, 8” 4-Jaw Chuck
Boring Mills
Cincinnati Gilbert 6” Floor Type Horizontal Boring Mill, s/n 290, 700 RPM, 8’ Longitudinal Travel, 48”x108” Floor Plate, 48”x69” Rotary Table
Planers
Cincinnati 40”x168” Openside Planer, with Gorton 3 HP 5600 RPM Milling Head Mounted on Rail, Side Head, 42” Approx. Max. Over Table, Upgraded with Sabina Electrics
Rockford 32”x120” Hy-draulic Openside Planer, s/n 80-OG-02, with 2-Rail Heads, Oilgear Pump System
Rockford 32”x66” Hy-draulic Openside Planer, s/n n/a, with 1-Rail Head, 1-Side Head
Churchill 24”x72” Openside Planer with Rail Head
Saws & Cut-Offs
DoAll Horizontal Band Saw
Startrite 2.5 KW Cut-Off
Dewalt Model GW Radial Arm Saw, s/n 109036
Wellsaw 9” Vertical Band Saw
Drills
Cincinnati Bickford 6’ Arm 17” Column Model Super Service Radial Drill, s/n 6E-494, WITH Tilt Box Work Table
Solberga 24” Model SE275 Drill, s/n 5720, 1548 RPM, 19”x23” Work Table with Oil Trough
Cincinnati Bickford 21” Model Super Service Round Colum Drill, s/n 1L-2449
Grinders
Blanchard 36” No. 18 Rotary Surface Grinder, s/n 9969, with Walker Chuck Control
Hanchett 16’ Approx. Face Grinder
Samual Rogers Model ML-78” Saw & Knife Fitting Grinder, s/n 109
Mattison 12”x48” Surface Grinder, s/n n/a, with Electro Magnetic Chuck
Brown & Sharpe 8”x24” Surface Grinder, s/n 1840, with Permanent Magnetic Chuck
Mitsui 6”x12” Model MSG200M Surface Grinder, s/n 06-1716, with Permanent Magnetic Chuck
Sellers Drill Grinder
Mills
Cincinnati No. 2 Universal Horizontal Mill, s/n 2A2U1K-57, 12”X52” Table, 500 RPM, Independent Vertical Milling Head
Kent 2HP Model K111-22 Ram Type Vertical Mill, s/n 890412-4, 42” Table, Acu-Rite DRO
Gorton Model 9-J Ram Type Vertical Mill, 10”x40” Table with Power Feed
Ironworkers
2 – Mubea 21 Ton Model BF10F Ironworkers, s/n 163/30894/23, 3” Angle Capacity
Misc. Machines
Langbow Model TM38 Hydraulic Twin Tube Bender, s/n 13345 (new 1999), 72” CC, 1-1/2” Tube Capacity
Pratt & Whitney 12” Model B Vertical Slotter, s/n 740, 24” Rotary Table
Davis Keyseater with Cutters
Roper Whitney/Pexto Model 3617-B Power Crimping & Beading Machine, s/n 139-11-80
40” Initial Type Bending Roll
Sunnen Model LBN Precision Honing Machine, s/n 44582
Airco 250 Amp Model CV-250 Welder with Universal 11 Wire Feed
Wilson 250 Amp Welder, s/n 8799
2 – Engel Model 750 Edge Notchers, s/n 1209-70 & 806
Lockformer 14 Stand Lockformer
Air Press with 46” Rail Feed
Pneumatic Riveter
Inspection
Rahn 60”x72”x12” Thick Granite Surface Plate with Stand
Wilson Model 3JR Rockwell Hardness Tester, s/n 3JR-4273
Forklift Trucks
Clark 25,000 LB. Model CY250 Gas Forklift Truck, s/n 41426-7-2258, 120” Max. Lift, with Boom
Clark 16,500 LB. Model CHY165 LP Gas Forklift Truck, s/n CHY160B-8-995, 120” Max. Lift
Yale 10,000 LB. Model LA51AT-100UF LP Gas Forklift Truck, s/n H-005443, 148” Max. Lift, 3117 Hours on Meter, with Boom
Hyster Approx. 10,000 LB. LP Gas Forklift Truck
Clark 2,500 LB. Approx. LP Gas Forklift Truck, 8782 Hours on Meter
Plant Equipment
Ingersoll Rand 15 HP Tank Mounted Air Compressor, s/n B314061
Portable A-Frame with Chain Hoist
Large Assortment Perishable Tooling*Chucks*Heavy Duty Vises*Wheel Balancer*Inspection*Taps*C-Clamps*Crane Scales*Lifting Chains*Power and Large Hand Tools*Gear Pullers*Welding Carts*Etc.
Trailers
22” Low Boy Trailer with Approx. 24’ Well
Fruehauf 42’ Model VVESAEI Van Trailer, s/n 313089
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Niblock Machinery, Inc. - Complete Metal Working & Fabricating Repair Facility
Sale Day:
Doors Open at 8:30 AM, Sale Starts At 10:00 AM
Buyers Premium:
18% applies on all online purchases.
Inspection / Preview:
Tuesday, October 2, 2018, 9 AM - 4 PM (EST)
Removal / Pickup:
Thursday, October 4th - Friday, October 12th, By Appointment
Rigging / Transport:
See our list of approved riggers & transport companies
Sales Tax:
7.00% Without Proper Exemption
Major Asset ListSee Catalog for Complete Listing
Shears
Cincinnati ¼” x 10’ Model 1810 Shear, s/n 35371, 48” Front Operated Power Back Gauge
Adira ¼” x 10’ Model GHS-0630 Hydraulic Shear, s/n 3768/18011D (New 2000), 40” Front Operated Power Back Gauge
Famco 10 Gauge x 10’ Model 1010 Shear, s/n S-04865144, 24” Rear Operated Manual Back Gauge, 10’ Squaring Arm
Famco 18 Gauge x 72” Model E-12143 Shear, s/n S-F65WV03, 24” Manual Back Gauge
Famco 16 Gauge x 52” Model E-12039 Shear, s/n S-L67WV58, 16” Manual Back Gauge
Press & Apron Brakes
Lodge & Shipley 200/300 Ton Model S200A8 Press Brake, s/n 46042, 12”x10’ Bed, 4” Stroke, 12” Shut Height, Air Clutch
Niagara 150 Ton Model 150-8-10 Press Brake, 10’ Bed, Lower Die Holder, Hurco Autobend 7 Back Gauge
Dreis & Krump 150 Ton Model 1012R Press Brake. s/n C-15987, Ram & Bed Planed & Drilled for Angles, Lower Die Holder, Air Clutch (In Process of Rebuild)
Whitney Jensen 8’ Apron Bending Brake
Wheel Press
Elmes 500 Ton Model N3000 Hydraulic Wheel Press, s/n 11251, 12’ Length of Stress Bars, 72” Between Bars, 20” Ram Diameter, Spacer Plates
Presses
Federal 80 Ton No. 7 OBI Press, s/n 7-707, 7” Stroke, 19.5” Stroke, 28”x36” Bed, 75 SPM, Triad Brake Monitor, Air Clutch
L&J 45 Ton Model 45 OBI Press, s/n 41813, 2.5” Stroke, 15”x26-1/2” Bed, Air Clutch
Niagara 35 Ton Model M35 OBI Press, s/n 44980, 3” Stroke, 15”x24” Bed, Air Clutch, Palm Button Pedestal
Danly 25 Ton OBI Press, s/n 2552390164, 3” Stroke, 8-3/4” Shut Height, 12”x20” Bed, 150 SPM, Air Clutch
Perkins Model 194K Bench Press, s/n 36037, 2” Stroke, 6”x10” Bed, On Stand
Benchmaster Model BT-5 Bench Press, s/n DJG63858
Dake 150 Ton Model 3-150 H-Frame Hydraulic Press, s/n 163522, 44” Between Frame, 20” Bed Width
Dake 75 Ton Model 75H H-Frame Hydraulic Press, 44” Between Frame, 14” Bed Width
Lathes
Leblond 25”x84”/144” Sliding Bed Tool Room Lathe, s/n N11186, 24” 3-Jaw Chuck, 600 RPM, Inch Threading, Taper Attachment, Steady Rest
Lodge & Shipley 20”/24”x144” Toolroom Lathe, s/n 35367, 500 RPM, 18” 4-Jaw Chuck, Inch Threading, Taper Attachment
Lodge & Shipley 22”/25”x96” Toolroom Lathe, s/n n/a, 500 RPM, Inch Threading, Taper Attachment
Monarch 20”/22.5”X48” Toolroom Lathe, s/n 9482, 400 RPM, 12” 3-Jaw Chuck, Inch Threading, Taper Attachment
American 18”x60” Model Pacemaker Tool Room Lathe, s/n n/a, 1500 RPM, 12” 4-Jaw Chuck, Inch Threading
Cincinnati 18”x54” Tool Room Lathe, s/n 1W4H5L-86, 980 RPM, 12” 3 Jaw Chuck, Inch Threading, Steady Rest
South Bend 10”x24” Tool Room Lathe, 3-Jaw Chuck, Inch Threading
Fisher Oil Grooving Lathe, 8” 4-Jaw Chuck
Boring Mills
Cincinnati Gilbert 6” Floor Type Horizontal Boring Mill, s/n 290, 700 RPM, 8’ Longitudinal Travel, 48”x108” Floor Plate, 48”x69” Rotary Table
Planers
Cincinnati 40”x168” Openside Planer, with Gorton 3 HP 5600 RPM Milling Head Mounted on Rail, Side Head, 42” Approx. Max. Over Table, Upgraded with Sabina Electrics
Rockford 32”x120” Hy-draulic Openside Planer, s/n 80-OG-02, with 2-Rail Heads, Oilgear Pump System
Rockford 32”x66” Hy-draulic Openside Planer, s/n n/a, with 1-Rail Head, 1-Side Head
Churchill 24”x72” Openside Planer with Rail Head
Saws & Cut-Offs
DoAll Horizontal Band Saw
Startrite 2.5 KW Cut-Off
Dewalt Model GW Radial Arm Saw, s/n 109036
Wellsaw 9” Vertical Band Saw
Drills
Cincinnati Bickford 6’ Arm 17” Column Model Super Service Radial Drill, s/n 6E-494, WITH Tilt Box Work Table
Solberga 24” Model SE275 Drill, s/n 5720, 1548 RPM, 19”x23” Work Table with Oil Trough
Cincinnati Bickford 21” Model Super Service Round Colum Drill, s/n 1L-2449
Grinders
Blanchard 36” No. 18 Rotary Surface Grinder, s/n 9969, with Walker Chuck Control
Hanchett 16’ Approx. Face Grinder
Samual Rogers Model ML-78” Saw & Knife Fitting Grinder, s/n 109
Mattison 12”x48” Surface Grinder, s/n n/a, with Electro Magnetic Chuck
Brown & Sharpe 8”x24” Surface Grinder, s/n 1840, with Permanent Magnetic Chuck
Mitsui 6”x12” Model MSG200M Surface Grinder, s/n 06-1716, with Permanent Magnetic Chuck
Sellers Drill Grinder
Mills
Cincinnati No. 2 Universal Horizontal Mill, s/n 2A2U1K-57, 12”X52” Table, 500 RPM, Independent Vertical Milling Head
Kent 2HP Model K111-22 Ram Type Vertical Mill, s/n 890412-4, 42” Table, Acu-Rite DRO
Gorton Model 9-J Ram Type Vertical Mill, 10”x40” Table with Power Feed
Ironworkers
2 – Mubea 21 Ton Model BF10F Ironworkers, s/n 163/30894/23, 3” Angle Capacity
Misc. Machines
Langbow Model TM38 Hydraulic Twin Tube Bender, s/n 13345 (new 1999), 72” CC, 1-1/2” Tube Capacity
Pratt & Whitney 12” Model B Vertical Slotter, s/n 740, 24” Rotary Table
Davis Keyseater with Cutters
Roper Whitney/Pexto Model 3617-B Power Crimping & Beading Machine, s/n 139-11-80
40” Initial Type Bending Roll
Sunnen Model LBN Precision Honing Machine, s/n 44582
Airco 250 Amp Model CV-250 Welder with Universal 11 Wire Feed
Wilson 250 Amp Welder, s/n 8799
2 – Engel Model 750 Edge Notchers, s/n 1209-70 & 806
Lockformer 14 Stand Lockformer
Air Press with 46” Rail Feed
Pneumatic Riveter
Inspection
Rahn 60”x72”x12” Thick Granite Surface Plate with Stand
Wilson Model 3JR Rockwell Hardness Tester, s/n 3JR-4273
Forklift Trucks
Clark 25,000 LB. Model CY250 Gas Forklift Truck, s/n 41426-7-2258, 120” Max. Lift, with Boom
Clark 16,500 LB. Model CHY165 LP Gas Forklift Truck, s/n CHY160B-8-995, 120” Max. Lift
Yale 10,000 LB. Model LA51AT-100UF LP Gas Forklift Truck, s/n H-005443, 148” Max. Lift, 3117 Hours on Meter, with Boom
Hyster Approx. 10,000 LB. LP Gas Forklift Truck
Clark 2,500 LB. Approx. LP Gas Forklift Truck, 8782 Hours on Meter
Plant Equipment
Ingersoll Rand 15 HP Tank Mounted Air Compressor, s/n B314061
Portable A-Frame with Chain Hoist
Large Assortment Perishable Tooling*Chucks*Heavy Duty Vises*Wheel Balancer*Inspection*Taps*C-Clamps*Crane Scales*Lifting Chains*Power and Large Hand Tools*Gear Pullers*Welding Carts*Etc.
Trailers
22” Low Boy Trailer with Approx. 24’ Well
Fruehauf 42’ Model VVESAEI Van Trailer, s/n 313089
Niblock Machinery, Inc. - Complete Metal Working & Fabricating Repair Facility
Sale Date(s)
Venue Address
130 E. Windsor
Elkhart
Indiana
46514
United States
General delivery information available from the auctioneer
For rigger information, visit heathindustrial.com/riggers
If you want us to ship / palletize your purchases (if available) please fill out the following form:
https://heathindustrial.com/ship
We offer LIMITED services to the contiguous United States (aka “lower 48”). We do not ship to P.O. Boxes, Alaska, Hawaii or US Protectorates.
WE WILL ONLY SHIP TO ADDRESS ON FILE WITH BIDSPOTTER. If your address is incorrect in bidspotter, FIX IT. DO NOT ask us to ship to another address, we will only ship to address on file.
Our services include boxed, and limited palletized freight options. This does NOT include disassembly of assets.These services are also contingent on the location of the equipment and resources available at that location.. Shipping is subject to regulation. In situations where we do not have a forklift onsite, you will have to contract with another service provider to load your equipment.
BOXED SHIPMENT is available to support you with shipment services contracted by us for small purchases that can be boxed.
The Standard Processing Fees are as follows:
1 - 4 Lots: $15 per Lot
5-9 Lots: $12 per Lot
10 + Lots: $10 per Lot
This fee is based on items of a standard size and weight that can be easily boxed and shipped.
Oversized items and items in excess of 70lbs will incur an additional processing fee, and may need to be palletized and shipped via common carrier.
This fee does not include the incurred carrier rate charge that varies as a function of weight and size. We do not accept shipments involving you sending us a FedEx or UPS number, or labels. We will process the shipping directly with the carrier.
Pickup from our office is available for small hand carry items only. There will be a $50.00 - $500.00 fee for transport of above items to our warehouse, depending on size / quantity of items.
PALLETIZED SERVICE is available to prepare and load your pallet(s) onto a freight carrier, contracted by us. For all other services including you contracting with your own freight carrier, see below, THIRD PARTY PALLETIZING & CRATING. We will NOT offer palletizing services if you contract the freight carrier. Loading occurs at the sale premise. This does NOT include disconnection of power / utilities from assets, disassembly of assets, knocking down racking, etc. It means placing your items onto a skid and preparing for shipment. The Processing Fee is $250.00 per pallet and includes the pallet, packing, securing, labeling and forklift FOB loading.
THIRD-PARTY PALLETIZING & CRATING is available to support you with shipment services for larger purchases requiring pallets or crates. This service requires you to contact and contract your own freight carrier. We will not release your purchase to a third-party freight carrier without a Bill of Lading provided by you.
After purchase, please reply to the invoice email sent, requesting shipping, or email us @ auctions@heathindustrial.com. Please provide your invoice number and bidder number.
Please note that for boxed shipping and palletizing, there will be a delay in processing and shipping your items. Most of our boxed shipping is done at our main facility in Hoffman Estates, Illinois. We do not transport items back to our main facility on a daily basis for shipping. Be advised that this delay may be up to four weeks or longer. If you need your purchases shipped immediately, we suggest you contract with a third-party packing and shipping company.
Important Information
Niblock Machinery, Inc
Final Sale, Everything Goes! Complete Repair Facility
Auction Date: October 3, 2018 at 10:am
Inspection / Preview: Tuesday, October 2, 2018 from 9 - 4 pm EDT
Removal: Thursday, Oct 4th thru Friday, Oct 12th By Appointment
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms and Conditions
Please note our deposit requirements for bidders with no bidspotter bidder history or bidder history with any negative feedback:
Insufficient Bidspotter history
Due to your insufficient Bidspotter history we may require a deposit up to $500.00 USD (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
Bidspotter history with negative feedback
Due to your Bidspotter history we will require a $2,500.00 USD deposit (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $2,500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
All Bidders
Everything will be sold to the highest bidders for cash, in accordance with our standard Terms of Sale which can be found on our web site at www.heathindustrial.com or by requesting a copy of our terms and conditions of sale by email to auctions@heathindustrial.com.
Your bid is a contract: Place a bid only if you are serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with Heath Industrial. All bids are in US dollars.
A Buyers Premium will be added to all items sold. Heath Industrial makes every attempt to accurately describe all items at the auction sale, there are always possibilities of errors occurring which is out of our control. It is important to know this fact if you plan on placing a Proxy Bid or if you plan on bidding via bidspotter.com.
Please inspect before you bid and remember, everything is sold AS IS, WHERE IS with absolutely no warranty or guarantee of any kind, either written or implied.
Payments can be via company check, cash, or wire transfer. Credit Cards are accepted for an additional fee. All successful bidders will receive their invoices via email from Heath Industrial after the last day of the auction sale.
All successful bidders will be responsible for sales taxes which may be added to your invoice unless an exemption certificate is supplied prior to invoicing.
Heath Industrial reserves the right to automatically charge payment card on file with bidspotter.com, for any and all outstanding invoices not paid within 48 hours after the close of the auction.
Removal:
Rigging and removal is the responsibility of the buyer. Small items that can be carried out should be removed immediately after the auction or at the latest, the day after the auction. All riggers or buyers who will be removing items using any powered vehicle will need to provide a certificate of insurance that is acceptable to Heath Industrial. Removal will begin when the auction sale has been completed and payment in full has been received.
If you need assistance please call us at our corporate offices @ 847-380-1755 or via email at auctions@heathindustrial.com
