This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 848-229-2500 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/5
 - Image 1 of 5
 - Image 2 of 5
 - Image 3 of 5
 - Image 4 of 5
 - Image 5 of 5
 - Image 1 of 5
 - Image 2 of 5
 - Image 3 of 5
 - Image 4 of 5
 - Image 5 of 5
3,700 USD
Elizabeth, New Jersey
0.00%
18.00%
Tongil Mod.TGU-27 10.6" x 20" Universal ID/OD Cylindrical Grinder- S/N , 360 Degree Swivel Motorized Workhead, 10.6" Swing over Table, 20" Grinding Length, 286 Lb. Work Piece Weight, (6) Workhead Speeds 46-360 RPM, No.4MT Workhead Center Taper, 0.77" Diameter of Spindle Hole, 60 Degree Swivel 5HP Motorized Wheelhead, (2) Spindle Speeds 1660 & 1880 RPM, 14" x 1 1/4" x 6" Grinding Wheel, No.4MT Tailstock, 1HP Motorized Internal Grinding Spindle, 18,000 RPM Internal Grinding Spindle Speeds, 0.59" - 3.15" Internal Grinding Capacity, 10.6" x 20" Swivel Table, 25" Manual Longitudinal Table Traverse, 24.4" Hyd. Longitudinal Table Traverse, 2-157 IPM Automatic Table Traverse, Automatic Incremental Infeed, Automatic Plunge Feed, Coolant, Hyd. Pump, Wheelhead Lube Pump, 3 Jaw Chuck, Digital Readout,
Tongil Mod.TGU-27 10.6" x 20" Universal ID/OD Cylindrical Grinder- S/N , 360 Degree Swivel Motorized Workhead, 10.6" Swing over Table, 20" Grinding Length, 286 Lb. Work Piece Weight, (6) Workhead Speeds 46-360 RPM, No.4MT Workhead Center Taper, 0.77" Diameter of Spindle Hole, 60 Degree Swivel 5HP Motorized Wheelhead, (2) Spindle Speeds 1660 & 1880 RPM, 14" x 1 1/4" x 6" Grinding Wheel, No.4MT Tailstock, 1HP Motorized Internal Grinding Spindle, 18,000 RPM Internal Grinding Spindle Speeds, 0.59" - 3.15" Internal Grinding Capacity, 10.6" x 20" Swivel Table, 25" Manual Longitudinal Table Traverse, 24.4" Hyd. Longitudinal Table Traverse, 2-157 IPM Automatic Table Traverse, Automatic Incremental Infeed, Automatic Plunge Feed, Coolant, Hyd. Pump, Wheelhead Lube Pump, 3 Jaw Chuck, Digital Readout,

Castwell, Inc Sale #2

Ends from
Venue Address
650 Pennsylvania Ave
Elizabeth
New Jersey
07201
United States

For Ind-Auctions,LLC delivery information please telephone 848-229-2500.

Important Information

 Rigging Companies::

Pedowitz Rigging: 1-800-794-8817

A&A Machinery Moving: 1-800-626-6330

Hagenbuch Rigging : 610-462-9673

 

BidSpotter Customer Service Support Department

To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone, email or LiveChat

Terms and Conditions

Terms of Services

REGISTRATION: All purchasers are required to register 
and give full name, address and contact information.All 
bidders who want to register and are out of country are 
required to wire transfer $1,000.00 to be approved.Please
email our firm for transfer information.

Subject to amendments and modifications announced by the
Auctioneer at the time of the auction, any person participating in
the auction shall be bound by the following terms and conditions
and as stated or otherwise set forth in the brochure.


1. Payment in full must be made before or immediately after the
Conclusion of the auction. All payments shall be made by way of wire
transfer, certified check, bank draft, or a company check
accompanied with a valid bank letter of authorization guaranteeing
irrevocable payment to; Industrial Auction Services LLC. in the following
format: ?Name of Bank hereby guarantees irrevocable payment of
checks payable to Industrial Auction Services LLC. up to Amount in Words
& Currency for purchases made by our client - name of Client.
This letter is valid for purchases made at the auction of Name of
Auction being held in City, State on Date. Payments
may be made in advance of the auction via wire transfer and any
balance in excess of the balance owing will be refunded after the
Auction.


2. Sales taxes arising on a sale, shall be paid to the Auctioneer at
The time of sale. Purchasers claiming exemptions from taxes shall
provide proof satisfactory to the Auctioneer of their entitlement to
Claim such exemption. In the absence of proof satisfactory to the
Auctioneer, taxes shall be paid by the Purchaser.


3. All Articles will be sold to the highest bidder conforming to the
bid process, provided that the Auctioneer reserves the right to sell
articles by individual, group lots and ?in bulk?, as he deems
Appropriate. The Auctioneer reserves the right to sell on behalf of
Third parties, its own account or on the account of others. Should
any dispute arise between two or more bidders or as to any bid, the
lot in question may, at the Auctioneers discretion, be immediately
Put up again and resold. The Auctioneer shall regulate all matters
relating to the conduct of the auction and his decision shall be final
And binding on all bidders. The records kept by the clerk of the
Sale, shall in all cases be accepted by the bidder as final.


4. Auctioneer reserves the right to sell subject to reserve and to bid
for its own account and for the account of others, whether by
Verbal or written proxy, all subject to prior sale.


5. All sales shall be concluded as indicated by the Auctioneer and
No Purchaser may thereafter revoke their bid. Title to the lots
purchased shall not pass until payment in full of the purchase price
Is received.


6. ALL SALES ARE FINAL, ON AN ?AS IS WHERE IS?, ?IN
PLACE? ?WITH ALL FAULTS? BASIS WITH NO
CONDITIONS OR WARRANTIES WHETHER EXPRESSED,
IMPLIED, STATUTORY OR OTHERWISE, INCLUDING
WITHOUT LIMITATION, WARRANTIES OR CONDITIONS
AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE,
QUANTITY, QUALITY, MERCHANTABILITY, STATE,
CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL
BE INVALIDATED AND THE AUCTIONEER SHALL HAVE
NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE
OR LOT WHETHER CONTAINED IN A CATALOGUE,
ADVERTISEMENT OR OTHERWISE. DESCRIPTIONS HAVE
BEEN PREPARED FOR GUIDE PURPOSES ONLY AND
SHALL NOT BE RELIED UPON BY THE PURCHASER FOR
ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL
ITEMS BEFORE BIDDING. PURCHASERS SHALL BE
DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN
INSPECTIONS AND INVESTIGATIONS.


7. No article shall be removed unless paid for in full and all
articles purchased shall be removed within the guidelines and
Terms stipulated. The Purchaser shall be responsible for all costs of
removal and shall be liable for any damages, including without
limitation, any environmental damage, caused during or as a result
Of the removal. Purchasers shall comply with all environmental
laws and regulations and all requirements established by the
Auctioneer for the removal of articles, including requirements as to
bonding of movers; please refer to the REMOVAL
REQUIREMENTS on inside back cover. No claims shall be
Allowed after removal of the purchased article.


8. Where available, documents of transfer, including motor
vehicle ownership documents, which are in possession of the
Auctioneer, will be provided to the Purchaser following the auction
Or as soon thereafter as such documents are available.


9. If the Auctioneer is unable to deliver an article sold to a
Purchaser due to fire, theft or any other reason whatsoever, the
Auctioneer shall reimburse the Purchaser for all monies paid to the
Auctioneer in respect of the article and the Auctioneer shall have
no further liability to the Purchaser arising from or relating to such
Loss, including without limitation, any damages for loss of profits.


10. The Auctioneer reserves the right to refuse any applicant the
privilege of bidding or attending the auction and may revoke such
Privilege at any time.


11. The Auctioneer assumes no responsibility or any liability once
Title passes, which occurs at time of payment in full. Purchasers are
Advised to prearrange for insurance coverage of their purchase.
Title will revert to seller in the event purchaser does not remove
His purchase by the time specified.


12. Time shall be of the essence. If a Purchaser fails to make
payment or remove goods within the time periods 
provided, the Auctioneer may resell the article purchased by
auction, private contract or otherwise, as the Auctioneer in his
discretion deems advisable, and the Purchaser shall be liable for
the shortfall and all costs and expenses, including but not limited to
legal fees, moving and storage costs and commissions incurred in
Such resale, or any other fees as assessed by the Auctioneer.


13. No Purchasers may assign, transfer or dispose of their rights in
any article purchased before they have paid the purchase price in
Full. Notwithstanding, these terms and conditions shall continue to be in
Effect and automatically transferred to any assignee or transferee.
These terms and conditions together with any amendments or
modifications expressly made by the Auctioneer at the time of the
auction constitute all the terms and conditions with respect to the
Sale of articles at this auction. There are no representations,
warranties, terms, conditions undertakings or collateral agreements
Except as provided.

See Full Terms And Conditions