33
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
33
Pre-Approved Machinery Movers
National Rigging and Transportation
100 Municipal Street
Welland, Ontario
Canada L3B 3P2
Attn: Darren Chapman
Office: 1-905-788-1110
Mobile: 1-905-704-9011
darren@nationalrigging.com
MD RIGGING & Machinery Movers Ltd.
558 Burnham Street
Cobourg, Ontario
Canada, K9A 2X1
Attn: Don Finkle
Mobile: 1-905-376-0233
don@mdrigging.com
FEN Industrial
245 King George Rd. #212
Brantford, Ontario
Canada N3R 7N7
Attn: Steve Gallagher
Office: 1-800-347-0471
Mobile: 1-905-807-2337
steve@fenindustrial.com
2 Day Auction !! Cutler Forest Products
Auction Date & Time: lots start closing on Wednesday, November 16th at 10:00 am ET AND on Thursday, November 17th at 11:00 am ET
Location: 81 Royal Group Crescent, Woodbridge, Ontario
Inspection: Tuesday November 15th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featured:
High-Capacity Storage Retrieval & Angular Saw System (New Cost Replacement Over $2.5MM)
2015 HOMAG High-Capacity Storage Retrieval System, Saw, Chopper and Stackers Consisting of:
Panel & Wood Saws
2008 SELCO WNA 600 SLC CNC Angular Panel Saw, s/n 33228 w/ SELCO Control Panel, 100" Opening, Safety Fencing/Guarding, lnfeed Conveyor, Stack Conveyor, Stack Lifter
2002 SELCO WNT 600 Rear Load Automatic Panel Saw, Main & Scoring Saw, Air Table, 13'-11" x 14'-7" Capacity Auto Loading w/ Stack Conveyor Feeder to Stack Lifter, Rear Load Sheet Feeder, s/n 22282
2001 ALTENDORF F45 ELMO CE CNC Sliding Table Saw, s/n 01-07-014, w/ ALTENDORF Control Panel
SCM SI15F Sliding Table Saw, w/ 2005 4-Roll Material Power Feeder
SCM Sl15F Sliding Table Saw, s/n AB 10726 w/ 4-Roll Material Power Feeder
LOBO Up-Acting Cut-Off Saw w/ In/Outfeed Conveyors, Pistorius Screen Control, Automatic Measuring Stop
CENTAURO 800 CO Vertical Bandsaw, s/n 7019 w/ Material Guide, 30" Throat
GENERAL 90-460M3 Vertical Bandsaw, s/n 91784710 w/ Material Guide, 22'" Throat
Double Mitre Saw
DEWALT 36" Radial Arm Saw
OMEGA Radial Arm Saw
Robotic Palletizing / Label System
2015 KUKA KR 120 R3200 PA 5-Axis Palletizing Robot, 120KG Load Capacity, 3195mm Max Reach, s/n 676442, KUKA Controller, Pneumatic Lifting Device, Light Curtains, WEBER 5300 R.H. DOM Label Printer/Applicator, s/n W53002243, Busch MNK MM 1104BV Vacuum Pump
CNC Machining - Drilling & Routers
2020 HOMAG Centateq N-300 Nested-Based CNC Machining Center / Router, 5' X 10' Table, 10 kW (13.4 HP) Router Spindle, 1,250 - 24,000RPM Spindle Speed, 7-Station Tool Holder, s/n 0-250-69-0859 w/ HOMAG Control Panel, Light Curtains
(3) 2021 HUAHUA SKH-612HS 6-Side CNC Machining & Processing Centers, Horizontal & Vertical Drilling, 1200mm Max Workpiece Width, 5000mm Max Workpiece Length, 48mm Max Workpiece Thickness, 21” Colour Screen Control Display, Precision Drilling Box, Double Clamping and Feeding, Servo Motor, Flexible Discharge, Roller Assist Transfer Table, Automatic Oil Injection, s/n’s ZL01434, (Note: (2) New in Crate – Never Installed)
2010 WEEKE BHX 050 Vertical CNC Machining Center, s/n 0-250-66-6690
2007 WEEKE Optimat BHX 500 CNC Machining & Processing Center, Air Table, Auto Clamp Feed, s/n 0-250-66-4386
2004 WEEKE Optimat BST 500 CNC Through-Feed Drilling & Boring Machine, 2500 mm Opening, (6) Bottom Vertical Boring Units, s/n 0-251-66-2008, CNC Control, Feed Through, Vertical and Horizontal Boring
2006 KOMO VR510 Machi II CNC Router, 60" x 120" Vacuum table, 16HP ATC Variable Speed Spindle, 10-Station Tool Holder, s/n 57184-06, 3 Phase, 480V w/ KOMO MHS Automated Loader/Unloader & Outfeed Table, GE Fanuc Panel i CNC Controller
2019 BIESSE Rover Gold 1232 Compact CNC Machining Center / Router, s/n 1000031662, BH 26 Boring Head, (16) Vertical Spindles, (8) Horizontal Spindles, Saw Blades in Both X & Y Revolving Tool Changer, 16-Positions, 3280 x 1260 x 180 mm Working Area, CNC Control Panel, Benq Display, B_Solid 3D Cad Cam Software
2003 BIESSE Rover 35L CNC Machining Center / Router, Travels: X-4500mm Y-1650mm Z-180mm, 21-Position Tool Holder, s/n 28980 w/ (2) Vacuum Pumps, CHAMPION Air Compressor,
2000 BIESSE Rover 27 CNC Machining / Boring / Routing Center, (20) Vertical & (8) Horizontal Heads, Travels: X-3434mm, Y-1300mm, Z-155mm, CNC Control Panel, s/n 03236
BIESSE Rover 321R CNC Machining Center / Router, Travels: X-107″ (2,740 mm), Y-36.9″ (937 mm), Z-2.4″ (60 mm), Boring - 2.3 HP (2 kW), 4,000 RPM Motor, (13) Vertical Spindles w/ (8) X-Axis & (5) Y-Axis, Horizontal Spindles w/ (2+2) in X-Axis & (1+1) in Y-Axis, 2.36″ (60 mm) Max. Boring Depth, Machining - 9 HP (7.5 kW) w/ Variable Speed From 1,000 – 24,000RPM, 7-Position ATC, s/n 91988, CNI XNC CNC Control Panel, Vacuum Pump, Light Curtains
BIESSE Techno SVBL Automatic Feed Through Boring & Dowel Inserting Machine, s/n 82476 w/ (2) Vibratory Bowl Feeders, BIESSE CNC Controller
BIESSE Techno Logic Horizontal & Vertical Boring & Drilling Machine, 3200mm Working Area, (4) Bottom & (2) Top Vertical Units, (20) Horizontal Spindles Per, s/n 82475
BIESSE Beaver Multi-Spindle Boring Machine, (21) Spindle Horizontal & (2x10) Vertical Boring Units, s/n 224/84
ACCU SYSTEMS MMTJ-6 Full 3-Axis CNC Machining Center, Mitering, Mortising, Tenoning, s/n 022-07-MMTJ-6 w/ (2) Milling Heads
Est. 2014 PILLAR MACHINE MMTJ Full 3-Axis CNC Machining Center, Mitering, Mortising, Tenoning, s/n PM-018-14-MMTJ-12 w/ (2) Milling Heads
Edge Banders
2011 HOMAG KAL 210 Edition Single Side Edge Bander, End Trimmer, (2) Pre-Trim Top & Bottom, (4) Front & Rear Trim, Grooving Unit, Buffer, Quick Melt, s/n 0-200-66-7737 w/ HOMAG Electrical Panel
2006 HOMAG Optimat KAL 310/3/A20 Single Side Edge Bander, s/n 0-200-05-0575 w/ HOMAG Power Control PC22 Controller, Single Coil Banding Stand, Glue System, Milling, Buffing Stations
2000 HOMAG Optimat KL 76/A20 Edge Bander, Quick Melt glue system, Pre-Mill, Top & Bottom Bevel & Fine Trim, Edge Profile Shaper, Edge Sander, Top & Bottom Buffer, s/n 0-200-15-1893
2008 BRANDT KDF 770 Single Side Edge Bander, s/n 0-261-66-5627 w/ BRANDT PC 20+ Power Control, Glue System, Milling, Sanding, Buffing, Horizontal Coil Stand
(6) 1998 POLYMAC Single 89-N Hot Melt Contour Edge Banders
(2) DOUCET BT3-36 Edge Bander Return Conveyors
Case Clamps
2013 LIGMATECH MPH410/25/07 Case Clamp, 78" x 32" Opening, s/n 0-306-06-5325
2008 LIGMATECH MPH 400/09 Case Clamp Machine, 640mm x 560mm Clamp Opening, s/n 0-306-66-5178
2014 CAMERON AUTOMATION G179X-5 5-Arm Pneumatic Door Clamp
2011 CAMERON AUTOMATION 79X-5-LM 5-Arm Pneumatic Door Clamp, s/n 79X5-LM-M1
JLT 79X-5-M 5-Arm Rotary Miter Pneumatic Door Clamp
(30+) Reach Trucks & Forklifts
(2) 2008 RAYMOND EASI R45TT Electric Reach Trucks, 4,500lb Cap., 210" Mast Height, s/n’s EZ-08-39098, EZ-D-08-39389,
2007 RAYMOND EASI R40TT Electric Reach Truck, 4,000lb Cap., 36V, s/n EZ-D-07-38061
2006 RAYMOND EASI R40TT Electric Reach Truck, 4,500lb Cap., 200" Max Lift, s/n EZ-D-06-35986
2006 RAYMOND EASI R40TT Electric Reach Truck, 4,000lb Cap., 250" Max Lift, 36V, s/n EZ-D-06-37445
(2) 2007 RAYMOND 740 R35TT Electric Reach Trucks, 3,500lb Cap., 250" Max Lift, s/n’s 740-07-CA07754, 740-07-CA07764
(3) 2002 RAYMOND EASI R30TT Electric Reach Trucks, 3,000lb Cap., 192" Max Lift, 24V, s/n’s ET-D-02-11921, EZ-A02-25159, ES-D-00-08943
(2) RAYMOND EASI Electric Reach Trucks, 3,000lb Cap., 252" Max Lift, 36V, s/n’s ES-8-57-01818, ET-B-97-05407
RAYMOND DOCKSTOCKER DSS 350 TT Stand Up Rider Counterbalanced Electric Forklift, 3,500lb Cap., 227" Max Lift, 36V, s/n S350-00794-96
RAYMOND EASI Forklift, s/n 1818
HYSTER S70 FT Propane Forklift, 7,000lb Cap., 3-Stage Mast, s/n F187V11379F
(3) HYSTER S65XM Propane Forklifts, 6,000lb Cap., 3-Stage Mast, s/n’s D187V3099B, D187V30966B, N/A
HYSTER E60XN-33 Electric Forklift, 5,600Ib Cap., 187" Max Lift, 48" Forks, 48V, Cushion Tires, s/n A268N04916J
YALE GLC070VXNGSE085 Propane Forklift, 6,500lb Cap., 182” Max Lift, 3-Stage Mast, Cushion Tires, 54" Forks, Approx. 8,865hrs, s/n A910V04442C (Out of Service)
TOYOTA 42-6FGCU30 Propane Forklift, 5,800lb Cap., 187" Max Lift, Side Shift, Cushion Tires, Approx. 24,103hrs, s/n 60137 (Condition Unknown)
TOYOTA 42-6FGCU25 Propane Forklift, 5,510lb Cap., 170" Max Lift, Cushion Tire, Approx. 14,920hrs, s/n 61242
UNICARRIER MCUG1F2F30LV Propane Forklift, 5,250lb Cap., 187" Max Lift, Side Shift, Approx. 5,640hrs, s/n CUG1F2-9R21624
HYSTER E60Z-33 Electric Forklift, 5,500lb Cap., 193" Max Lift, Cushion Tires, 48" Forks, 36V, s/n G108N08853F
HYSTER E50XL Electric Forklift, 4,550lb Cap., 187" Max Lift, 48V, 48” Forks, Approx. 4,713hrs, s/n C108V17559N
CATERPILLAR EP6000 Electric Forklift, 5,640Ib Cap., 48V, Cushion Tires, Approx. 7,791hrs, s/n FN408955 (Condition Unknown)
(2) 2003 RAYMOND 112TM-FRE60L Rider Electric Pallet Jacks6,000lb Cap., 24V, s/n’s 112-03-48386, D187V30966B
HYSTER W20ZA Electric Stacker, 2,000lb Cap., 118" Max Lift, 24V, 42" Forks, s/n A495N01859E
Battery Charger Station w/ (10) Forklift Battery Chargers
SKYJACK SJIII 3219 Electric Scissor Lift
Trucks & Trailers
2021 KENWORTH T880 T/A Truck Tractor, Cummins X15 500 HP, Eaton Ultrashift Plus Transmission, VIN# N/A (Subject to Lease Approval)
2021 KENWORTH T270 S/A Straight Van Truck, Curtain Side, Paccar PX-7 350HP, Allison 2500RDS Transmission, VIN# 2NKHHM6H4NM980633 (Subject to Lease Approval)
2018 PETERBILT PB337 S/A Straight Van Truck, Pacar PX-7 350HP, Allison 2500RDS Transmission, Power Tailgate, VIN# 2NP2HM7X0JM466679 (Subject to Lease Approval)
2010 Transcraft Tri-Axle Curtain Side Trailer Model Eagle H F3 48’ X 102”, VIN# 1TTF483C3A1088285
(2) Lode King Tri-Axle Curtain Side Trailers, VIN# 2LDPF423649040977 & VIN# 2LDPF423719035606
Packaging
2013 PACKSIZE EM7 On Demand Right Sized Packaging Solution System, 6-Station Custom Box Maker and Multiple Box Design Format, Large Infeed w/ Multiple Feed In Tracks
PACKSIZE On Demand GL II Auto Gluer, 4' Cap., s/n GL2-202286 w/ NORDSON Mesa 4-2H/G Gluer, s./n SA13G64138
SEALED AIR Instapak SpeedyPacker Insight Foam-ln-Bag Packaging System, s/n SP5-731S
SEALED AIR NewAir I.B. Flex Stand and Roll Winder, s/n NAF-16699
(2) FOX C4 48" Turntable Type Automatic Pallet Wrappers, s/n’s C4-092412-166, C4-052908118
WULFTEC WHP-200 High Profile Turntable Type Automatic Pallet Wrapper, s/n 1197-2722
DAMARK B44-180 Sleeve Wrapper, 36"W Feed Belt w/ DAMARK S44T6745 Heat Tunnel
2008 SA-321PE-W112-PS Shrink Wrap Machine, s/n 083006-02 w/ In/Out Gravity Feed Conveyors, 38" Flow Wrapper, Shrink Tunnel
STRAPACK RQ8 Strapping Machine, s/n 20325102
(5) STRAPACK JK-2 Semi-Auto Strapping Machines
(4) STARPACK Strapping Machine
2017 Semi-Auto Strapping Machine, s/n 117011079
Portable 2-Wheel Strapping Cart w/ FROMM A335 Manual Sealless Steel Strapping Tool
(2) Portable 2-Wheel Strapping Carts w/ FROMM P328 Battery Powered Plastic Strapping Tools
(3) Portable 2-Wheel Strapping Carts w/ FROMM P326 Battery Powered Manual Plastic Strapping Tools
(2) Portable 2-Wheel Strapping Carts w/ FROMM P324 Sealless Battery Powered Plastic Combination Strapping Tools
Portable 2-Wheel Strapping Carts
(2) Foot Activated Pneumatic Box Staplers
Air Management
2008 ATLAS COPCO GA37VSD Variable Speed Rotary Screw Air Compressor, s/n AP1576752, 50HP, 185 PSI, 256 CFM
ATLAS COPCO GA75 Rotary Screw Air Compressor, s/n ATT 478325, 100HP, 132 PSI, 433 CFM
SULLAIR 1809E/A Rotary Screw Air Compressor, 25HP, s/n 200806120069
CHAMPION 25HP Piston Type Air Compressor
CHAMPION 10HP Piston Type Air Compressor
2002 ULTRA AIR UA250AC Refrigerated Compressed Air Dryer, s/n U-36809-38
ATLAS COPCO Oil/Water Separator
Woodworking Support Equipment
ACT 150HP Dust Collection System w/ Controls, Blowers, Airlocks, Ducting, Fire Suppression System,
N.R. MURPHY 60HP Dust Collection System w/ Controls, Blowers, Airlocks, Ducting, Fire Suppression System
HAAS HTLL 145/185 Woodchipper, 57"W Opening, 75HP, s/n 25577
AIR CONTROL TECHNOLOGY GB 8x16x8 Enclosed Glue Spray Booth, s/n 6558-07/16, Dual Sliding Doors, Single Sliding Back Door, Exhaust Fan, Filter Box, 2020 BINKS Pressure Pot, s/n 375881
2008 TITUS PLUS 134 Hinge Insertion Machine, s/n 1220
2008 TITUS 133 Hinge Machine, s/n 1219
SCM T120C Spindle Shaper, s/n 1830579
SCM T 110 Spindle Shaper, s/n 8.S10581, w/ 2015 SIVER AP44 4-Roll Material Power Feeder
2004 OMAL Livello 1 Plus Dowel lnserter, s/n 4054, w/ OMAL Deluxe NC400 Control Panel
LARICK 222 Two Spindle Brush Sander, s/n 28028 w/ Variable Speed Controls
COOPER & HORTON Progress Edge Sander, 48" Table
PROGRESS PMC-150 Horizontal Belt Sander, s/n A927, 5HP, 6" x 48"
R&D Warehouse Room
Material Handling
2014 BLUE GIANT 'HW40001 Scissor Lift Table, 4,000kg Capacity, 48" x 66" Table, s/n 214122279
BLUE GIANT HW4001 Scissor Lift Table
ECONO LIFT Scissor Lift Table, 5,000lb Cap., 36" x 72" Table, Fool Pedal Controls
ECONO LIFT D0-30-20 Scissor Lift Table, 2,000lb Cap., s/n 83231
ECONO Scissor Lift Table, 2,000lb Cap., s/n 83232
HANDLING SPECIALTY Scissor Lift Table, 5,000lb Cap., 36" x 72" Table
HANDLING SPECIALTY 32-50 Scissor Lift Table, s/n L9829, 5,000lb Cap., 36" x 72" Table
Green Scissor Lift Table
(150+) Gravity Feed Roller Conveyors, 24" x 8'
(39) Sections of 18" x 8' Gravity Feed Conveyors
(13) Sections Gravity Feed Roller Conveyor, Approx. 18" x 8'
(3) Sections of Gravity Feed Conveyors
(11) Rolling Transfer Gravity Feed Conveyors w/ Floor Track
(20) Hydraulic Pallet Jacks, 2,500lb Cap.
CARDINAL 708 Digital Platform Scale, s/n 9411-17, 48" x 48", 5,000lb x 0.5lb
Plant Support Equipment
(161) Sections of NORTH AMERICAN STEEL Industrial Pallet Racking, 42”D, Approx. (8) Crossbeams Per Section
(85) Sections of Industrial Pallet Racking, 12’W x 42”D
(32) Sections of Industrial Pallet Racking, 6’W x 42”D w/ Mesh Decking
2005 Weber W5200v2 Industrial Label Printer Applicator
Batching System Model 1300, s/n BC-016
SWEED Scrap Banding Chopper, s/n 510AA-8-89-0094
(12) BSI BATCHING SYSTEMS Hardware Sorting / Bagging Line 600 Vibratory Feeders w/ Variable Speed Control, BATCHMASTER Series II Controller
Pegboard Mechanical Punch, s/n 10176 w/ In-Out Feed Conveyors, 48"W
BUFFALO 18" Pedestal Drill Press
(9) Portable Self Dumping Hoppers
(5) 10-Step Rolling Warehouse Ladders
(5 Rolling Warehouse Ladder
(3) Sections of 6' Racking
(4) 48" Portable Floor Fans
(2) 2-Door Flammable Storage Cabinets
(4) Metal Clip-Together Shelves, (3) 18" x 36", (1) 18" x 48"
(9) 4-Wheel Warehouse Order Picking Carts
Man Cage, Drill Press, Cut-Off saw, Bench Grinder, etc.
PLUS: Portable Dust Collectors, Benchtop Drill Presses, Rolling Racks, Compound Mitre Saws, Hand Tools, Line Painters, Grease Pumps, Pedestal Fans, Pneumatic Hand Staplers, 12" Bench Top Fans, 2-Step Stools, Picker Carts, 4-Wheel Dollies, Shop Vacs, BBQ, Pallet Racking & Much More!
Office Equipment
COMPLETE OFFICE CONTENTS Including: Executive Furnishings, Computers, Multi-Station Workstations, Seating, KYOCERA Taskfla 406ci/5002i Printers & Copiers, Servers, Networking, Cafeteria Area Contents, Staff Lockers, Office Supplies, Etc.
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday November 18th, 2022.
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: 3PM Friday December 9th, 2022.
Site Supervisor: ODD 647-991-6905
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
Pre-Approved Machinery Movers
National Rigging and Transportation
100 Municipal Street
Welland, Ontario
Canada L3B 3P2
Attn: Darren Chapman
Office: 1-905-788-1110
Mobile: 1-905-704-9011
darren@nationalrigging.com
MD RIGGING & Machinery Movers Ltd.
558 Burnham Street
Cobourg, Ontario
Canada, K9A 2X1
Attn: Don Finkle
Mobile: 1-905-376-0233
don@mdrigging.com
FEN Industrial
245 King George Rd. #212
Brantford, Ontario
Canada N3R 7N7
Attn: Steve Gallagher
Office: 1-800-347-0471
Mobile: 1-905-807-2337
steve@fenindustrial.com
2 Day Auction !! Cutler Forest Products
Auction Date & Time: lots start closing on Wednesday, November 16th at 10:00 am ET AND on Thursday, November 17th at 11:00 am ET
Location: 81 Royal Group Crescent, Woodbridge, Ontario
Inspection: Tuesday November 15th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featured:
High-Capacity Storage Retrieval & Angular Saw System (New Cost Replacement Over $2.5MM)
2015 HOMAG High-Capacity Storage Retrieval System, Saw, Chopper and Stackers Consisting of:
Panel & Wood Saws
2008 SELCO WNA 600 SLC CNC Angular Panel Saw, s/n 33228 w/ SELCO Control Panel, 100" Opening, Safety Fencing/Guarding, lnfeed Conveyor, Stack Conveyor, Stack Lifter
2002 SELCO WNT 600 Rear Load Automatic Panel Saw, Main & Scoring Saw, Air Table, 13'-11" x 14'-7" Capacity Auto Loading w/ Stack Conveyor Feeder to Stack Lifter, Rear Load Sheet Feeder, s/n 22282
2001 ALTENDORF F45 ELMO CE CNC Sliding Table Saw, s/n 01-07-014, w/ ALTENDORF Control Panel
SCM SI15F Sliding Table Saw, w/ 2005 4-Roll Material Power Feeder
SCM Sl15F Sliding Table Saw, s/n AB 10726 w/ 4-Roll Material Power Feeder
LOBO Up-Acting Cut-Off Saw w/ In/Outfeed Conveyors, Pistorius Screen Control, Automatic Measuring Stop
CENTAURO 800 CO Vertical Bandsaw, s/n 7019 w/ Material Guide, 30" Throat
GENERAL 90-460M3 Vertical Bandsaw, s/n 91784710 w/ Material Guide, 22'" Throat
Double Mitre Saw
DEWALT 36" Radial Arm Saw
OMEGA Radial Arm Saw
Robotic Palletizing / Label System
2015 KUKA KR 120 R3200 PA 5-Axis Palletizing Robot, 120KG Load Capacity, 3195mm Max Reach, s/n 676442, KUKA Controller, Pneumatic Lifting Device, Light Curtains, WEBER 5300 R.H. DOM Label Printer/Applicator, s/n W53002243, Busch MNK MM 1104BV Vacuum Pump
CNC Machining - Drilling & Routers
2020 HOMAG Centateq N-300 Nested-Based CNC Machining Center / Router, 5' X 10' Table, 10 kW (13.4 HP) Router Spindle, 1,250 - 24,000RPM Spindle Speed, 7-Station Tool Holder, s/n 0-250-69-0859 w/ HOMAG Control Panel, Light Curtains
(3) 2021 HUAHUA SKH-612HS 6-Side CNC Machining & Processing Centers, Horizontal & Vertical Drilling, 1200mm Max Workpiece Width, 5000mm Max Workpiece Length, 48mm Max Workpiece Thickness, 21” Colour Screen Control Display, Precision Drilling Box, Double Clamping and Feeding, Servo Motor, Flexible Discharge, Roller Assist Transfer Table, Automatic Oil Injection, s/n’s ZL01434, (Note: (2) New in Crate – Never Installed)
2010 WEEKE BHX 050 Vertical CNC Machining Center, s/n 0-250-66-6690
2007 WEEKE Optimat BHX 500 CNC Machining & Processing Center, Air Table, Auto Clamp Feed, s/n 0-250-66-4386
2004 WEEKE Optimat BST 500 CNC Through-Feed Drilling & Boring Machine, 2500 mm Opening, (6) Bottom Vertical Boring Units, s/n 0-251-66-2008, CNC Control, Feed Through, Vertical and Horizontal Boring
2006 KOMO VR510 Machi II CNC Router, 60" x 120" Vacuum table, 16HP ATC Variable Speed Spindle, 10-Station Tool Holder, s/n 57184-06, 3 Phase, 480V w/ KOMO MHS Automated Loader/Unloader & Outfeed Table, GE Fanuc Panel i CNC Controller
2019 BIESSE Rover Gold 1232 Compact CNC Machining Center / Router, s/n 1000031662, BH 26 Boring Head, (16) Vertical Spindles, (8) Horizontal Spindles, Saw Blades in Both X & Y Revolving Tool Changer, 16-Positions, 3280 x 1260 x 180 mm Working Area, CNC Control Panel, Benq Display, B_Solid 3D Cad Cam Software
2003 BIESSE Rover 35L CNC Machining Center / Router, Travels: X-4500mm Y-1650mm Z-180mm, 21-Position Tool Holder, s/n 28980 w/ (2) Vacuum Pumps, CHAMPION Air Compressor,
2000 BIESSE Rover 27 CNC Machining / Boring / Routing Center, (20) Vertical & (8) Horizontal Heads, Travels: X-3434mm, Y-1300mm, Z-155mm, CNC Control Panel, s/n 03236
BIESSE Rover 321R CNC Machining Center / Router, Travels: X-107″ (2,740 mm), Y-36.9″ (937 mm), Z-2.4″ (60 mm), Boring - 2.3 HP (2 kW), 4,000 RPM Motor, (13) Vertical Spindles w/ (8) X-Axis & (5) Y-Axis, Horizontal Spindles w/ (2+2) in X-Axis & (1+1) in Y-Axis, 2.36″ (60 mm) Max. Boring Depth, Machining - 9 HP (7.5 kW) w/ Variable Speed From 1,000 – 24,000RPM, 7-Position ATC, s/n 91988, CNI XNC CNC Control Panel, Vacuum Pump, Light Curtains
BIESSE Techno SVBL Automatic Feed Through Boring & Dowel Inserting Machine, s/n 82476 w/ (2) Vibratory Bowl Feeders, BIESSE CNC Controller
BIESSE Techno Logic Horizontal & Vertical Boring & Drilling Machine, 3200mm Working Area, (4) Bottom & (2) Top Vertical Units, (20) Horizontal Spindles Per, s/n 82475
BIESSE Beaver Multi-Spindle Boring Machine, (21) Spindle Horizontal & (2x10) Vertical Boring Units, s/n 224/84
ACCU SYSTEMS MMTJ-6 Full 3-Axis CNC Machining Center, Mitering, Mortising, Tenoning, s/n 022-07-MMTJ-6 w/ (2) Milling Heads
Est. 2014 PILLAR MACHINE MMTJ Full 3-Axis CNC Machining Center, Mitering, Mortising, Tenoning, s/n PM-018-14-MMTJ-12 w/ (2) Milling Heads
Edge Banders
2011 HOMAG KAL 210 Edition Single Side Edge Bander, End Trimmer, (2) Pre-Trim Top & Bottom, (4) Front & Rear Trim, Grooving Unit, Buffer, Quick Melt, s/n 0-200-66-7737 w/ HOMAG Electrical Panel
2006 HOMAG Optimat KAL 310/3/A20 Single Side Edge Bander, s/n 0-200-05-0575 w/ HOMAG Power Control PC22 Controller, Single Coil Banding Stand, Glue System, Milling, Buffing Stations
2000 HOMAG Optimat KL 76/A20 Edge Bander, Quick Melt glue system, Pre-Mill, Top & Bottom Bevel & Fine Trim, Edge Profile Shaper, Edge Sander, Top & Bottom Buffer, s/n 0-200-15-1893
2008 BRANDT KDF 770 Single Side Edge Bander, s/n 0-261-66-5627 w/ BRANDT PC 20+ Power Control, Glue System, Milling, Sanding, Buffing, Horizontal Coil Stand
(6) 1998 POLYMAC Single 89-N Hot Melt Contour Edge Banders
(2) DOUCET BT3-36 Edge Bander Return Conveyors
Case Clamps
2013 LIGMATECH MPH410/25/07 Case Clamp, 78" x 32" Opening, s/n 0-306-06-5325
2008 LIGMATECH MPH 400/09 Case Clamp Machine, 640mm x 560mm Clamp Opening, s/n 0-306-66-5178
2014 CAMERON AUTOMATION G179X-5 5-Arm Pneumatic Door Clamp
2011 CAMERON AUTOMATION 79X-5-LM 5-Arm Pneumatic Door Clamp, s/n 79X5-LM-M1
JLT 79X-5-M 5-Arm Rotary Miter Pneumatic Door Clamp
(30+) Reach Trucks & Forklifts
(2) 2008 RAYMOND EASI R45TT Electric Reach Trucks, 4,500lb Cap., 210" Mast Height, s/n’s EZ-08-39098, EZ-D-08-39389,
2007 RAYMOND EASI R40TT Electric Reach Truck, 4,000lb Cap., 36V, s/n EZ-D-07-38061
2006 RAYMOND EASI R40TT Electric Reach Truck, 4,500lb Cap., 200" Max Lift, s/n EZ-D-06-35986
2006 RAYMOND EASI R40TT Electric Reach Truck, 4,000lb Cap., 250" Max Lift, 36V, s/n EZ-D-06-37445
(2) 2007 RAYMOND 740 R35TT Electric Reach Trucks, 3,500lb Cap., 250" Max Lift, s/n’s 740-07-CA07754, 740-07-CA07764
(3) 2002 RAYMOND EASI R30TT Electric Reach Trucks, 3,000lb Cap., 192" Max Lift, 24V, s/n’s ET-D-02-11921, EZ-A02-25159, ES-D-00-08943
(2) RAYMOND EASI Electric Reach Trucks, 3,000lb Cap., 252" Max Lift, 36V, s/n’s ES-8-57-01818, ET-B-97-05407
RAYMOND DOCKSTOCKER DSS 350 TT Stand Up Rider Counterbalanced Electric Forklift, 3,500lb Cap., 227" Max Lift, 36V, s/n S350-00794-96
RAYMOND EASI Forklift, s/n 1818
HYSTER S70 FT Propane Forklift, 7,000lb Cap., 3-Stage Mast, s/n F187V11379F
(3) HYSTER S65XM Propane Forklifts, 6,000lb Cap., 3-Stage Mast, s/n’s D187V3099B, D187V30966B, N/A
HYSTER E60XN-33 Electric Forklift, 5,600Ib Cap., 187" Max Lift, 48" Forks, 48V, Cushion Tires, s/n A268N04916J
YALE GLC070VXNGSE085 Propane Forklift, 6,500lb Cap., 182” Max Lift, 3-Stage Mast, Cushion Tires, 54" Forks, Approx. 8,865hrs, s/n A910V04442C (Out of Service)
TOYOTA 42-6FGCU30 Propane Forklift, 5,800lb Cap., 187" Max Lift, Side Shift, Cushion Tires, Approx. 24,103hrs, s/n 60137 (Condition Unknown)
TOYOTA 42-6FGCU25 Propane Forklift, 5,510lb Cap., 170" Max Lift, Cushion Tire, Approx. 14,920hrs, s/n 61242
UNICARRIER MCUG1F2F30LV Propane Forklift, 5,250lb Cap., 187" Max Lift, Side Shift, Approx. 5,640hrs, s/n CUG1F2-9R21624
HYSTER E60Z-33 Electric Forklift, 5,500lb Cap., 193" Max Lift, Cushion Tires, 48" Forks, 36V, s/n G108N08853F
HYSTER E50XL Electric Forklift, 4,550lb Cap., 187" Max Lift, 48V, 48” Forks, Approx. 4,713hrs, s/n C108V17559N
CATERPILLAR EP6000 Electric Forklift, 5,640Ib Cap., 48V, Cushion Tires, Approx. 7,791hrs, s/n FN408955 (Condition Unknown)
(2) 2003 RAYMOND 112TM-FRE60L Rider Electric Pallet Jacks6,000lb Cap., 24V, s/n’s 112-03-48386, D187V30966B
HYSTER W20ZA Electric Stacker, 2,000lb Cap., 118" Max Lift, 24V, 42" Forks, s/n A495N01859E
Battery Charger Station w/ (10) Forklift Battery Chargers
SKYJACK SJIII 3219 Electric Scissor Lift
Trucks & Trailers
2021 KENWORTH T880 T/A Truck Tractor, Cummins X15 500 HP, Eaton Ultrashift Plus Transmission, VIN# N/A (Subject to Lease Approval)
2021 KENWORTH T270 S/A Straight Van Truck, Curtain Side, Paccar PX-7 350HP, Allison 2500RDS Transmission, VIN# 2NKHHM6H4NM980633 (Subject to Lease Approval)
2018 PETERBILT PB337 S/A Straight Van Truck, Pacar PX-7 350HP, Allison 2500RDS Transmission, Power Tailgate, VIN# 2NP2HM7X0JM466679 (Subject to Lease Approval)
2010 Transcraft Tri-Axle Curtain Side Trailer Model Eagle H F3 48’ X 102”, VIN# 1TTF483C3A1088285
(2) Lode King Tri-Axle Curtain Side Trailers, VIN# 2LDPF423649040977 & VIN# 2LDPF423719035606
Packaging
2013 PACKSIZE EM7 On Demand Right Sized Packaging Solution System, 6-Station Custom Box Maker and Multiple Box Design Format, Large Infeed w/ Multiple Feed In Tracks
PACKSIZE On Demand GL II Auto Gluer, 4' Cap., s/n GL2-202286 w/ NORDSON Mesa 4-2H/G Gluer, s./n SA13G64138
SEALED AIR Instapak SpeedyPacker Insight Foam-ln-Bag Packaging System, s/n SP5-731S
SEALED AIR NewAir I.B. Flex Stand and Roll Winder, s/n NAF-16699
(2) FOX C4 48" Turntable Type Automatic Pallet Wrappers, s/n’s C4-092412-166, C4-052908118
WULFTEC WHP-200 High Profile Turntable Type Automatic Pallet Wrapper, s/n 1197-2722
DAMARK B44-180 Sleeve Wrapper, 36"W Feed Belt w/ DAMARK S44T6745 Heat Tunnel
2008 SA-321PE-W112-PS Shrink Wrap Machine, s/n 083006-02 w/ In/Out Gravity Feed Conveyors, 38" Flow Wrapper, Shrink Tunnel
STRAPACK RQ8 Strapping Machine, s/n 20325102
(5) STRAPACK JK-2 Semi-Auto Strapping Machines
(4) STARPACK Strapping Machine
2017 Semi-Auto Strapping Machine, s/n 117011079
Portable 2-Wheel Strapping Cart w/ FROMM A335 Manual Sealless Steel Strapping Tool
(2) Portable 2-Wheel Strapping Carts w/ FROMM P328 Battery Powered Plastic Strapping Tools
(3) Portable 2-Wheel Strapping Carts w/ FROMM P326 Battery Powered Manual Plastic Strapping Tools
(2) Portable 2-Wheel Strapping Carts w/ FROMM P324 Sealless Battery Powered Plastic Combination Strapping Tools
Portable 2-Wheel Strapping Carts
(2) Foot Activated Pneumatic Box Staplers
Air Management
2008 ATLAS COPCO GA37VSD Variable Speed Rotary Screw Air Compressor, s/n AP1576752, 50HP, 185 PSI, 256 CFM
ATLAS COPCO GA75 Rotary Screw Air Compressor, s/n ATT 478325, 100HP, 132 PSI, 433 CFM
SULLAIR 1809E/A Rotary Screw Air Compressor, 25HP, s/n 200806120069
CHAMPION 25HP Piston Type Air Compressor
CHAMPION 10HP Piston Type Air Compressor
2002 ULTRA AIR UA250AC Refrigerated Compressed Air Dryer, s/n U-36809-38
ATLAS COPCO Oil/Water Separator
Woodworking Support Equipment
ACT 150HP Dust Collection System w/ Controls, Blowers, Airlocks, Ducting, Fire Suppression System,
N.R. MURPHY 60HP Dust Collection System w/ Controls, Blowers, Airlocks, Ducting, Fire Suppression System
HAAS HTLL 145/185 Woodchipper, 57"W Opening, 75HP, s/n 25577
AIR CONTROL TECHNOLOGY GB 8x16x8 Enclosed Glue Spray Booth, s/n 6558-07/16, Dual Sliding Doors, Single Sliding Back Door, Exhaust Fan, Filter Box, 2020 BINKS Pressure Pot, s/n 375881
2008 TITUS PLUS 134 Hinge Insertion Machine, s/n 1220
2008 TITUS 133 Hinge Machine, s/n 1219
SCM T120C Spindle Shaper, s/n 1830579
SCM T 110 Spindle Shaper, s/n 8.S10581, w/ 2015 SIVER AP44 4-Roll Material Power Feeder
2004 OMAL Livello 1 Plus Dowel lnserter, s/n 4054, w/ OMAL Deluxe NC400 Control Panel
LARICK 222 Two Spindle Brush Sander, s/n 28028 w/ Variable Speed Controls
COOPER & HORTON Progress Edge Sander, 48" Table
PROGRESS PMC-150 Horizontal Belt Sander, s/n A927, 5HP, 6" x 48"
R&D Warehouse Room
Material Handling
2014 BLUE GIANT 'HW40001 Scissor Lift Table, 4,000kg Capacity, 48" x 66" Table, s/n 214122279
BLUE GIANT HW4001 Scissor Lift Table
ECONO LIFT Scissor Lift Table, 5,000lb Cap., 36" x 72" Table, Fool Pedal Controls
ECONO LIFT D0-30-20 Scissor Lift Table, 2,000lb Cap., s/n 83231
ECONO Scissor Lift Table, 2,000lb Cap., s/n 83232
HANDLING SPECIALTY Scissor Lift Table, 5,000lb Cap., 36" x 72" Table
HANDLING SPECIALTY 32-50 Scissor Lift Table, s/n L9829, 5,000lb Cap., 36" x 72" Table
Green Scissor Lift Table
(150+) Gravity Feed Roller Conveyors, 24" x 8'
(39) Sections of 18" x 8' Gravity Feed Conveyors
(13) Sections Gravity Feed Roller Conveyor, Approx. 18" x 8'
(3) Sections of Gravity Feed Conveyors
(11) Rolling Transfer Gravity Feed Conveyors w/ Floor Track
(20) Hydraulic Pallet Jacks, 2,500lb Cap.
CARDINAL 708 Digital Platform Scale, s/n 9411-17, 48" x 48", 5,000lb x 0.5lb
Plant Support Equipment
(161) Sections of NORTH AMERICAN STEEL Industrial Pallet Racking, 42”D, Approx. (8) Crossbeams Per Section
(85) Sections of Industrial Pallet Racking, 12’W x 42”D
(32) Sections of Industrial Pallet Racking, 6’W x 42”D w/ Mesh Decking
2005 Weber W5200v2 Industrial Label Printer Applicator
Batching System Model 1300, s/n BC-016
SWEED Scrap Banding Chopper, s/n 510AA-8-89-0094
(12) BSI BATCHING SYSTEMS Hardware Sorting / Bagging Line 600 Vibratory Feeders w/ Variable Speed Control, BATCHMASTER Series II Controller
Pegboard Mechanical Punch, s/n 10176 w/ In-Out Feed Conveyors, 48"W
BUFFALO 18" Pedestal Drill Press
(9) Portable Self Dumping Hoppers
(5) 10-Step Rolling Warehouse Ladders
(5 Rolling Warehouse Ladder
(3) Sections of 6' Racking
(4) 48" Portable Floor Fans
(2) 2-Door Flammable Storage Cabinets
(4) Metal Clip-Together Shelves, (3) 18" x 36", (1) 18" x 48"
(9) 4-Wheel Warehouse Order Picking Carts
Man Cage, Drill Press, Cut-Off saw, Bench Grinder, etc.
PLUS: Portable Dust Collectors, Benchtop Drill Presses, Rolling Racks, Compound Mitre Saws, Hand Tools, Line Painters, Grease Pumps, Pedestal Fans, Pneumatic Hand Staplers, 12" Bench Top Fans, 2-Step Stools, Picker Carts, 4-Wheel Dollies, Shop Vacs, BBQ, Pallet Racking & Much More!
Office Equipment
COMPLETE OFFICE CONTENTS Including: Executive Furnishings, Computers, Multi-Station Workstations, Seating, KYOCERA Taskfla 406ci/5002i Printers & Copiers, Servers, Networking, Cafeteria Area Contents, Staff Lockers, Office Supplies, Etc.
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday November 18th, 2022.
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: 3PM Friday December 9th, 2022.
Site Supervisor: ODD 647-991-6905
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.