1K
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
1K
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
BLUE GIANT ELECTRIC STACKER
For Cross Border Logistics, Customs Brokerage, Trucking, Transportation & Exporting Services, Please Contact:
JMD Customs Brokers Inc.
260 Export Blvd.
Mississauga, ON
L5S 1Y9
Phone: Ajay 416-823-4871 / Ekta 416-854-4876
Emal: aj@jmdcustoms.com / ekta@jmdcustoms.com
Auction Date & Time: lots start closing on Thurs. 02/06/2025 11:00 am
Location: 171 Robert St E, Penetanguishene, ON, L9M 1G9
Inspection: Wednesday February 5th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring
CNC Vertical Machining Centers
2018 HAAS VM-3 CNC Vertical Machining Center, CNC Control, 1GB Memory, Brushless 4th Axis Option, Auto Air Gun, Auxiliary Coolant Filter, Auto Door, Chip Auger, CT Option, Dynamic Work Offset & Tool Centre Point Control, Enclosure Exhaust, ETHERNET Interface, Haas Connect, High Intensity Lighting, High Speed Machining, Media Display, Programmable Coolant, Remote Jog Handle, Rotary Axis Calibration Tool, Rigid Tapping, Sidemount Tool Changer, Through Tool Air Blast, Table Air Supply, Through Spindle Coolant 300 PSI, WIFI Connection, Window Blast, WIPS-Renishaw Probing System, Macro Option, Spindle Orientation, Coordinate, Rotation & Scaling, Rigid Tapping, Worktable Light, 12,000 RPM Inline Spindle, s/n 1154300
HAAS VF-7 CNC Vertical Machining Center, CNC Control, Programmable Coolant, Quick Code, Rigid Tapping, Macro Option, Coordinate, Rotation & Scaling, 1MB, Remote Jog Handle, Brush 4th Axis Wiring, 20HP Vector Drive, Umbrella ATC, s/n 13007
HAAS VF-4 CNC Vertical Machining Center, CNC Control, 1MB Memory, Chip Auger, Programmable Coolant, Quick Code, Remote Jog Handle, 7,500 RPM Spindle, Rigid Tapping, ATC, s/n 18311
CNC Wire EDM’s
2016 SODICK VZ500L CNC Wire EDM, Sodick LN2W CNC Control, s/n T0312
2003 SODICK AQ535L CNC Wire EDM, Sodick LN1W CNC Control, s/n 0712
SODICK A350L CNC Wire EDM, FINE Sodick MARK XI EDW Control, s/n 288
Straight Side Stamping Press
NIAGARA SE2-350-84-36 Straight Side Press, s/n 38825, 350-Ton Cap., 12” Stroke, 34” Shut Height, 12” Adjustment, 36” x 84” Bed, 33 Strokes/min, 600V/3/60, 40HP Main Motor, 80 PSI Clutch Air, Microguard Triad Light Curtains, JIT Press Controls (Rebuilt by Barrie Welding & Machine)
MECON INDUSTRIES 400F181HDG Feeder, s/n 2406-108
MECON INDUSTRIES 60M24 Uncoiler, 6,000lb Cap., s/n 69707
Milling Machines & Lathes
(2) 2004 LILIAN 3VH Vertical Milling Machines, Heidenhain 3-axis DRO, 3HP
(2) 1999 TOS FGV32 Vertical Milling Machines, s/n’s 323000920, 323000919
TOS FV20 Vertical Milling Machine
EX-CELL-O 602 Vertical Milling Machine, Mitutoyo 2-Axis DRO, Power Feed, s/n 60210808
DEBER FU2 Universal Milling Machine, s/n 1019
HOWA SANGYO 1000 Lathe, 3-Jaw Chuck, Tailstock, Multi-Position Tool Post, Extra Chucks, s/n 10340
Grinders
2005 PROTH PSGS-4080AHX Automatic Surface Grinder, 40” x 80” Magnetic Chuck, s/n 0504H-04
CHEVALIER 618SP Super Precision Surface Grinder, Model ACCUGRIND-618SP, s/n FA4186002
JONES & SHIPMAN 540P Surface Grinder, s/n BO95831
(4) KENT KGS-200 Surface Grinders
(2) 2004 ACRA APSG-618B Surface Grinders, s/n’s 135, 136
Drills
1999 MAS V050 Radial Arm Drill, s/n 4003 w/ Box Table
EMA Radial Arm Drill w/ Box Table
ERLO TCA-35 Drill Press, s/n 2422/521
ERLO TCA-32 Drill Press
Saws
2014 BAXTER VERTICUT Roll-In Bandsaw
VERTICUT 114-A Roll-In Saw
GROB 4V-24 Vertical Bandsaw, s/n 1821
WALTER Cold Saw
Quality Control
MITUTOYO B504B CMM, Renishaw PH1 Probe, s/n 810004, Code No. 195-121
GAGE MASTER Optical Comparator
Compressors
DV SYSTEMS 7.5HP Piston Type Air Compressor, Product Number TAS-5052-69MS, s/n 089978
DEVAIR 7.5HP Piston Type Air Compressor, Model TAP-5052, s/n 36813LF
DV SYSTEMS 5HP Vertical Tank Compressor, Product Number IS5-4060-03, s/n 083649
DV SYSTEMS HTD52 Air Dryer
Rolling Stock
HYSTER E65XM2 Electric Forklift, 5,650lb Cap., 181.9” Max Lift, 3-Stage Mast, Side Shift, 36V, s/n F108V19964X w/ Charger
BLUE GIANT Electric Stacker
Plant Support Equipment
DAKE 50H Shop Press, s/n 165834
SUNNEN MBB-1660K Precision Honing Machine, s/n 82619 w/ Tooling
KALAMAZOO Belt/Disc Sander
TRINCO Sandblast Cabinet
(3) PARK THERMAL Ovens
KRAMER KTM EC-5 Dust Collector, 5HP, s/n 5879-EC
(4) 2-Ton Overhead Hoist Systems
MILLER Dialarc HF Welder
KIP 3000 Plotter
PLUS: Drill Presses, Shop Presses, Machine Tooling, Tool Holders, Power & Hand Tools, Vices, Workbenches, Hardware, Metal Racking, Toolboxes, Precision Instruments, Welding Supplies, Metal Inventory, Hardness Tester, Press Dies, Stamping Presses, Strapping Carts, Ladders, Shop Vacs, Fume Extraction Hood, Eye Bolts, Drill Sharpeners, Office Equipment and Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday February 7th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
BLUE GIANT ELECTRIC STACKER
For Cross Border Logistics, Customs Brokerage, Trucking, Transportation & Exporting Services, Please Contact:
JMD Customs Brokers Inc.
260 Export Blvd.
Mississauga, ON
L5S 1Y9
Phone: Ajay 416-823-4871 / Ekta 416-854-4876
Emal: aj@jmdcustoms.com / ekta@jmdcustoms.com
Auction Date & Time: lots start closing on Thurs. 02/06/2025 11:00 am
Location: 171 Robert St E, Penetanguishene, ON, L9M 1G9
Inspection: Wednesday February 5th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring
CNC Vertical Machining Centers
2018 HAAS VM-3 CNC Vertical Machining Center, CNC Control, 1GB Memory, Brushless 4th Axis Option, Auto Air Gun, Auxiliary Coolant Filter, Auto Door, Chip Auger, CT Option, Dynamic Work Offset & Tool Centre Point Control, Enclosure Exhaust, ETHERNET Interface, Haas Connect, High Intensity Lighting, High Speed Machining, Media Display, Programmable Coolant, Remote Jog Handle, Rotary Axis Calibration Tool, Rigid Tapping, Sidemount Tool Changer, Through Tool Air Blast, Table Air Supply, Through Spindle Coolant 300 PSI, WIFI Connection, Window Blast, WIPS-Renishaw Probing System, Macro Option, Spindle Orientation, Coordinate, Rotation & Scaling, Rigid Tapping, Worktable Light, 12,000 RPM Inline Spindle, s/n 1154300
HAAS VF-7 CNC Vertical Machining Center, CNC Control, Programmable Coolant, Quick Code, Rigid Tapping, Macro Option, Coordinate, Rotation & Scaling, 1MB, Remote Jog Handle, Brush 4th Axis Wiring, 20HP Vector Drive, Umbrella ATC, s/n 13007
HAAS VF-4 CNC Vertical Machining Center, CNC Control, 1MB Memory, Chip Auger, Programmable Coolant, Quick Code, Remote Jog Handle, 7,500 RPM Spindle, Rigid Tapping, ATC, s/n 18311
CNC Wire EDM’s
2016 SODICK VZ500L CNC Wire EDM, Sodick LN2W CNC Control, s/n T0312
2003 SODICK AQ535L CNC Wire EDM, Sodick LN1W CNC Control, s/n 0712
SODICK A350L CNC Wire EDM, FINE Sodick MARK XI EDW Control, s/n 288
Straight Side Stamping Press
NIAGARA SE2-350-84-36 Straight Side Press, s/n 38825, 350-Ton Cap., 12” Stroke, 34” Shut Height, 12” Adjustment, 36” x 84” Bed, 33 Strokes/min, 600V/3/60, 40HP Main Motor, 80 PSI Clutch Air, Microguard Triad Light Curtains, JIT Press Controls (Rebuilt by Barrie Welding & Machine)
MECON INDUSTRIES 400F181HDG Feeder, s/n 2406-108
MECON INDUSTRIES 60M24 Uncoiler, 6,000lb Cap., s/n 69707
Milling Machines & Lathes
(2) 2004 LILIAN 3VH Vertical Milling Machines, Heidenhain 3-axis DRO, 3HP
(2) 1999 TOS FGV32 Vertical Milling Machines, s/n’s 323000920, 323000919
TOS FV20 Vertical Milling Machine
EX-CELL-O 602 Vertical Milling Machine, Mitutoyo 2-Axis DRO, Power Feed, s/n 60210808
DEBER FU2 Universal Milling Machine, s/n 1019
HOWA SANGYO 1000 Lathe, 3-Jaw Chuck, Tailstock, Multi-Position Tool Post, Extra Chucks, s/n 10340
Grinders
2005 PROTH PSGS-4080AHX Automatic Surface Grinder, 40” x 80” Magnetic Chuck, s/n 0504H-04
CHEVALIER 618SP Super Precision Surface Grinder, Model ACCUGRIND-618SP, s/n FA4186002
JONES & SHIPMAN 540P Surface Grinder, s/n BO95831
(4) KENT KGS-200 Surface Grinders
(2) 2004 ACRA APSG-618B Surface Grinders, s/n’s 135, 136
Drills
1999 MAS V050 Radial Arm Drill, s/n 4003 w/ Box Table
EMA Radial Arm Drill w/ Box Table
ERLO TCA-35 Drill Press, s/n 2422/521
ERLO TCA-32 Drill Press
Saws
2014 BAXTER VERTICUT Roll-In Bandsaw
VERTICUT 114-A Roll-In Saw
GROB 4V-24 Vertical Bandsaw, s/n 1821
WALTER Cold Saw
Quality Control
MITUTOYO B504B CMM, Renishaw PH1 Probe, s/n 810004, Code No. 195-121
GAGE MASTER Optical Comparator
Compressors
DV SYSTEMS 7.5HP Piston Type Air Compressor, Product Number TAS-5052-69MS, s/n 089978
DEVAIR 7.5HP Piston Type Air Compressor, Model TAP-5052, s/n 36813LF
DV SYSTEMS 5HP Vertical Tank Compressor, Product Number IS5-4060-03, s/n 083649
DV SYSTEMS HTD52 Air Dryer
Rolling Stock
HYSTER E65XM2 Electric Forklift, 5,650lb Cap., 181.9” Max Lift, 3-Stage Mast, Side Shift, 36V, s/n F108V19964X w/ Charger
BLUE GIANT Electric Stacker
Plant Support Equipment
DAKE 50H Shop Press, s/n 165834
SUNNEN MBB-1660K Precision Honing Machine, s/n 82619 w/ Tooling
KALAMAZOO Belt/Disc Sander
TRINCO Sandblast Cabinet
(3) PARK THERMAL Ovens
KRAMER KTM EC-5 Dust Collector, 5HP, s/n 5879-EC
(4) 2-Ton Overhead Hoist Systems
MILLER Dialarc HF Welder
KIP 3000 Plotter
PLUS: Drill Presses, Shop Presses, Machine Tooling, Tool Holders, Power & Hand Tools, Vices, Workbenches, Hardware, Metal Racking, Toolboxes, Precision Instruments, Welding Supplies, Metal Inventory, Hardness Tester, Press Dies, Stamping Presses, Strapping Carts, Ladders, Shop Vacs, Fume Extraction Hood, Eye Bolts, Drill Sharpeners, Office Equipment and Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday February 7th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Catalog
Tags: Blue Giant, Giant, Electric Stacker