9
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
9
You are about to place a bid of USD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
For Cross Border Logistics, Customs Brokerage, Trucking, Transportation & Exporting Services, Please Contact:
JMD Customs Brokers Inc.
260 Export Blvd.
Mississauga, ON
L5S 1Y9
Phone: Ajay 416-823-4871 / Ekta 416-854-4876
Emal: aj@jmdcustoms.com / ekta@jmdcustoms.com
Auction Date & Time: lots start closing on Thurs. 02/20/2025 10:00 am
Location: 51 Four Valley Drive, Concord, ON, L4K 4V8
Inspection: Wednesday February 19th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
THIS SALE IS BEING CONDUCTED IN USD.
Feauring
CNC Machining Centers
2018 DMG MORI DMU 125 FD duoBLOCK 5-Axis Champion CNC Machining Center, 3D Control Heidenhain TNC 640 CNC Control, Motor Spindle HSK-A 100, 12,000 RPM, 52 kW, 430Nm, s/n 12470000283, Taper Cleaning Brushes, Tool Magazine, Wheel, 63 Pockets HSK-A 100, ICS 80 Bar, Frequency Controlled, Coolant Tempering for 980 L Units, Spray Pistol 3 Bar – 40 L/min, Cooling Air Blast, Infrared Measuring Probe Renishaw HSK-A 100, Combination Tool Measuring in Machining Area, 3D quickset Extension Package, MPC Machining Protection Control, Electronic Handwheel
2016 DMG MORI DMU 85 monoBLOCK 5-Axis Champion CNC Machining Center, 3D Control Heidenhain TNC 640 CNC Control, Motor Spindle SK 40 20,000 RPM, s/n 12160010923, Spindle Taper HSK-a 63, Tool Magazine, Chain Vert., 60 Pockets SK 40, Production Package 40 Bar/23 L/min, 600L Tank, Rotating Clear-View Window, Coolant Ring Jet, Spray Pistol w/ Pump 2 Bar/40 L/min, Oil and Emulsion Mist Separator, Cooling Air Blast, Infrared Measuring Probe Renishaw SK 40, Tool Measuring in Machining Area Blum Laser, 3D quickset, MPC Machining Protection Control, Electronic Handwheel, Safety Package for Power Failure
2012 PARPAS THS 120X CNC 2-Spindle 4-Axis CNC Vertical Machining Center, Heidenhain CNC Control, 49" x 40" Rotary Table, Travels: X-2000mm, Y-1600mm, Z-1250mm, Full B-Axis w/ Automatic Indexing +/- 180 Deg., TB 180 Double Spindle 180 Deg. Flip Head, 50 Taper 5,000 RPM and HSK 50E 26,000 RPM Heads, ATC, LOSMA DETEX DTE 150 Coolant Recycle and Filter Unit, s/n SE-TH27708
2004 PARPAS (FAMU) PHS 916TT90 CNC 5-Axis Bridge Type Vertical Machining Center, Heidenhain SELCA S4045PD CNC Control, 67.7” Main Table w/ Built-In 35.4” Rotary Table, Travels: X-63.04”, Y-31.5”, Z-63”, A-Axis Programmable Swivel Head: +95/45 Degree, C-Axis Programmable Rotary Table: 360 Degree in .001 Degree Increments, 3,300lb Max Table Load, HSK 63A Taper, (20) ATC, Speeds to 24,000 RPM, 23HP Motor, Flood Coolant, Chip Conveyor, Telescopic Way Covers, , s/n 481P/4
2002 PARPAS THS 125/2000 CNC 2-Spindle 4-Axis CNC Vertical Machining Center, Heidenhain CNC Control, 49" x 40" Rotary Table, 2-Spindle High Speed 180 Deg. Flip Head, 50 Taper, s/n 0081
(3) PARPAS PHS 812 CNC Vertical Machining Centers, Heidenhain CNC Control, 1320mm x 800mm Table, Travels: X-1200mm, Y- 800mm, 24,000RPM, HSK 63A, (20) ATC, s/n’s 341P/6, 311P/2, N/A
PARPAS S16 CNC Milling Machine, Heidenhain CNC Control, 29.5" x 78.5" Table, 50 Taper, s/n 011S16/3
DECKEL MAHO DMC 70V Machining Center, Heidenhain CNC Control, s/n 28810008092
CNC Turning Centers
2003 VDF BOEHRINGER DUS 800ti CNC Turning Center, Siemens Sinumerik CNC Control, 820mm Swing, 128mm Bore, 2000mm Between Centers, 28” 4-Jaw Chuck, s/n 2042.6603-05
2000 WEILIER E500 CNC Turning Center, s/n 808
CNC Gun Drills
2010 IMSA MF1000AF CNC Gun Drill, Selca 5404DD CNC Control, Travels: X- 900mm, Y-300mm, and Career Z: Drilling 1000mm, Stroke of Milling ISO40 W: Drive 250mm, 4,500KG Rotary Table Cap., s/n 102860303
2002 IMSA 1000 CNC Gun Drill, Selca S4045PD CNC Control, Travels X- 900mm, Y-300mm and Career Z: Drilling 1000mm, Stroke of Milling ISO40 W: Drive 250mm, 20,000KG Rotary Table Cap., s/n 021190162
Lathes & Milling Machines
BOEHRINGER VDF DUE 560 Engine Lathe, 22" Swing Over Bed, 14" Swing Over Cross Slide, 60" Distance Between Centers, Quick Change Tool Post, s/n 1022 0788 06-H
CHIEN YEH 18” x 40” CYNL450Gx1000 Engine Lathe, Aloris Tool Post, 35 to 1,800 RPM, s/n 91084
PARPAS SL100/3000 CNC Universal Milling Machine, Fidia CNC control, 52" x 140" Table, Travels: X-119", Y-59", Z-39", Universal Head, 50 Taper, s/n 100-9156
(3) FIRST Vertical Milling Machines w/ DRO’s
Grinders
PARPAS P1200 CNC Hydraulic Surface Grinder, Siemens Sinumerik CNC Control, 79” x 39.5" Magnetic Chuck, s/n 98.09.179.30
PARPAS RTANC 1000 Hydraulic Surface Grinder, 39.5" x 19.75" Magnetic Chuck, s/n 940213811
CHEVALIER FSG-1224AD Automatic Hydraulic Surface Grinder, 12” x 24” Magnetic Chuck, s/n FFA116001
(3) CHEVALIER FSG-618M Manual Surface Grinders, 6" x 18" Magnetic Chuck, s/n’s A3867057, A3791008, A3828067
PARPAS RCV700 Rotary Surface Grinder, Siemens Sinumerik CNC Control, 28"Dia. Rotary Table, Pendant Control, s/n 99.11.181.17
Spotting Press
2002 MILLUTENSIL BV28E 50-Ton Cap. Spotting Press, Siemens Simatic OP7 CNC Control, 39.5" x 46.5" Bolster, Roll-In Track, s/n 042
Injection Molding Machine
2006 HUSKY Electric 650 Injection Molding Machine
EDM’s
2016 SODICK AD55L CNC Sinker EDM, Sodick LN2 CNC Control, 23.62” x 15.75” x 15.75”, C-Axis w/ Rotational Spindle, 6-Station ATC, s/n T0058
SURE FIRST DM-860 Sinker Type EDM, s/n 0008011
(2) SURE FIRST ZPNC-408 Sinker Type EDM’s, s/n’s 0042323, 0043162
Quality Control
MITUTOYO FN-1106 CMM, Renishaw PH9A Probe, Travels: X-1100mm, Y-650mm, Z-460mm, CPU, Monitor, Keyboard, Extra Probes, s/n 9001915
MITUTOYO PH-350 Optical Comparator, s/n 456
Cranes
(4) CANADIAN CRANE 50’ Span x 7-Ton Cap. Bridge Cranes, Single Girder, Top Running, Underslung Hoist, Pendant Control
Plant Support Equipment
2018 OMEGA POWER SYSTEM Rotary Screw Air Compressor, 50HP, Type PS-2037DV-10-05, s/n 3453910001
TOYOTA 8FGCU30 Propane Forklift, 5,800lb Cap., 187 » Max Lift, 3-Stafe Mast, Side Shift, s/n 13717
LIFT RITE L68 Electric Walkie, 1,500lb Cap., s/n 2942
BAXTER VERTICUT Roll-In Saw
E-R MAIER Roll-In Saw
LASER STAR Engraving Machine
BERG PA-M21-P5 Portable Air-Cooled Chiller, s/n S03287-RC1-0717
FRONIUS MagicWave 2500 Welder, s/n 25073848
PLUS: LISTA Heavy Duty Storage Cabinets, Precision Instruments, Micrometers, Height Gauges, Verniers, Workbenches, Racking, Power & Hand Tools, Hardware, Tool Holders, Perishable Tooling, Welders, Tool Setters, Granite Plates, Toolboxes, Eye Bolts, Shackles, Lifting Magnets, Machine Vises, Tool Cutter Grinders, Floor Scales, Office Equipment & Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday February 21st, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
USD WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC ROYAL BANK
3300 HIGHWAY #7, WEST
CONCORD, ONTARIO L4K 1A5
BENEFICIARY NAME:
INFINITY ASSET SOLUTIONS INC.
63 MAPLECRETE ROAD
CONCORD, ONTARIO L4K 1A5
ACCOUNT #: 4010286
TRANSIT #: 00192
BANK #: 003
SWIFT CODE: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
For Cross Border Logistics, Customs Brokerage, Trucking, Transportation & Exporting Services, Please Contact:
JMD Customs Brokers Inc.
260 Export Blvd.
Mississauga, ON
L5S 1Y9
Phone: Ajay 416-823-4871 / Ekta 416-854-4876
Emal: aj@jmdcustoms.com / ekta@jmdcustoms.com
Auction Date & Time: lots start closing on Thurs. 02/20/2025 10:00 am
Location: 51 Four Valley Drive, Concord, ON, L4K 4V8
Inspection: Wednesday February 19th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
THIS SALE IS BEING CONDUCTED IN USD.
Feauring
CNC Machining Centers
2018 DMG MORI DMU 125 FD duoBLOCK 5-Axis Champion CNC Machining Center, 3D Control Heidenhain TNC 640 CNC Control, Motor Spindle HSK-A 100, 12,000 RPM, 52 kW, 430Nm, s/n 12470000283, Taper Cleaning Brushes, Tool Magazine, Wheel, 63 Pockets HSK-A 100, ICS 80 Bar, Frequency Controlled, Coolant Tempering for 980 L Units, Spray Pistol 3 Bar – 40 L/min, Cooling Air Blast, Infrared Measuring Probe Renishaw HSK-A 100, Combination Tool Measuring in Machining Area, 3D quickset Extension Package, MPC Machining Protection Control, Electronic Handwheel
2016 DMG MORI DMU 85 monoBLOCK 5-Axis Champion CNC Machining Center, 3D Control Heidenhain TNC 640 CNC Control, Motor Spindle SK 40 20,000 RPM, s/n 12160010923, Spindle Taper HSK-a 63, Tool Magazine, Chain Vert., 60 Pockets SK 40, Production Package 40 Bar/23 L/min, 600L Tank, Rotating Clear-View Window, Coolant Ring Jet, Spray Pistol w/ Pump 2 Bar/40 L/min, Oil and Emulsion Mist Separator, Cooling Air Blast, Infrared Measuring Probe Renishaw SK 40, Tool Measuring in Machining Area Blum Laser, 3D quickset, MPC Machining Protection Control, Electronic Handwheel, Safety Package for Power Failure
2012 PARPAS THS 120X CNC 2-Spindle 4-Axis CNC Vertical Machining Center, Heidenhain CNC Control, 49" x 40" Rotary Table, Travels: X-2000mm, Y-1600mm, Z-1250mm, Full B-Axis w/ Automatic Indexing +/- 180 Deg., TB 180 Double Spindle 180 Deg. Flip Head, 50 Taper 5,000 RPM and HSK 50E 26,000 RPM Heads, ATC, LOSMA DETEX DTE 150 Coolant Recycle and Filter Unit, s/n SE-TH27708
2004 PARPAS (FAMU) PHS 916TT90 CNC 5-Axis Bridge Type Vertical Machining Center, Heidenhain SELCA S4045PD CNC Control, 67.7” Main Table w/ Built-In 35.4” Rotary Table, Travels: X-63.04”, Y-31.5”, Z-63”, A-Axis Programmable Swivel Head: +95/45 Degree, C-Axis Programmable Rotary Table: 360 Degree in .001 Degree Increments, 3,300lb Max Table Load, HSK 63A Taper, (20) ATC, Speeds to 24,000 RPM, 23HP Motor, Flood Coolant, Chip Conveyor, Telescopic Way Covers, , s/n 481P/4
2002 PARPAS THS 125/2000 CNC 2-Spindle 4-Axis CNC Vertical Machining Center, Heidenhain CNC Control, 49" x 40" Rotary Table, 2-Spindle High Speed 180 Deg. Flip Head, 50 Taper, s/n 0081
(3) PARPAS PHS 812 CNC Vertical Machining Centers, Heidenhain CNC Control, 1320mm x 800mm Table, Travels: X-1200mm, Y- 800mm, 24,000RPM, HSK 63A, (20) ATC, s/n’s 341P/6, 311P/2, N/A
PARPAS S16 CNC Milling Machine, Heidenhain CNC Control, 29.5" x 78.5" Table, 50 Taper, s/n 011S16/3
DECKEL MAHO DMC 70V Machining Center, Heidenhain CNC Control, s/n 28810008092
CNC Turning Centers
2003 VDF BOEHRINGER DUS 800ti CNC Turning Center, Siemens Sinumerik CNC Control, 820mm Swing, 128mm Bore, 2000mm Between Centers, 28” 4-Jaw Chuck, s/n 2042.6603-05
2000 WEILIER E500 CNC Turning Center, s/n 808
CNC Gun Drills
2010 IMSA MF1000AF CNC Gun Drill, Selca 5404DD CNC Control, Travels: X- 900mm, Y-300mm, and Career Z: Drilling 1000mm, Stroke of Milling ISO40 W: Drive 250mm, 4,500KG Rotary Table Cap., s/n 102860303
2002 IMSA 1000 CNC Gun Drill, Selca S4045PD CNC Control, Travels X- 900mm, Y-300mm and Career Z: Drilling 1000mm, Stroke of Milling ISO40 W: Drive 250mm, 20,000KG Rotary Table Cap., s/n 021190162
Lathes & Milling Machines
BOEHRINGER VDF DUE 560 Engine Lathe, 22" Swing Over Bed, 14" Swing Over Cross Slide, 60" Distance Between Centers, Quick Change Tool Post, s/n 1022 0788 06-H
CHIEN YEH 18” x 40” CYNL450Gx1000 Engine Lathe, Aloris Tool Post, 35 to 1,800 RPM, s/n 91084
PARPAS SL100/3000 CNC Universal Milling Machine, Fidia CNC control, 52" x 140" Table, Travels: X-119", Y-59", Z-39", Universal Head, 50 Taper, s/n 100-9156
(3) FIRST Vertical Milling Machines w/ DRO’s
Grinders
PARPAS P1200 CNC Hydraulic Surface Grinder, Siemens Sinumerik CNC Control, 79” x 39.5" Magnetic Chuck, s/n 98.09.179.30
PARPAS RTANC 1000 Hydraulic Surface Grinder, 39.5" x 19.75" Magnetic Chuck, s/n 940213811
CHEVALIER FSG-1224AD Automatic Hydraulic Surface Grinder, 12” x 24” Magnetic Chuck, s/n FFA116001
(3) CHEVALIER FSG-618M Manual Surface Grinders, 6" x 18" Magnetic Chuck, s/n’s A3867057, A3791008, A3828067
PARPAS RCV700 Rotary Surface Grinder, Siemens Sinumerik CNC Control, 28"Dia. Rotary Table, Pendant Control, s/n 99.11.181.17
Spotting Press
2002 MILLUTENSIL BV28E 50-Ton Cap. Spotting Press, Siemens Simatic OP7 CNC Control, 39.5" x 46.5" Bolster, Roll-In Track, s/n 042
Injection Molding Machine
2006 HUSKY Electric 650 Injection Molding Machine
EDM’s
2016 SODICK AD55L CNC Sinker EDM, Sodick LN2 CNC Control, 23.62” x 15.75” x 15.75”, C-Axis w/ Rotational Spindle, 6-Station ATC, s/n T0058
SURE FIRST DM-860 Sinker Type EDM, s/n 0008011
(2) SURE FIRST ZPNC-408 Sinker Type EDM’s, s/n’s 0042323, 0043162
Quality Control
MITUTOYO FN-1106 CMM, Renishaw PH9A Probe, Travels: X-1100mm, Y-650mm, Z-460mm, CPU, Monitor, Keyboard, Extra Probes, s/n 9001915
MITUTOYO PH-350 Optical Comparator, s/n 456
Cranes
(4) CANADIAN CRANE 50’ Span x 7-Ton Cap. Bridge Cranes, Single Girder, Top Running, Underslung Hoist, Pendant Control
Plant Support Equipment
2018 OMEGA POWER SYSTEM Rotary Screw Air Compressor, 50HP, Type PS-2037DV-10-05, s/n 3453910001
TOYOTA 8FGCU30 Propane Forklift, 5,800lb Cap., 187 » Max Lift, 3-Stafe Mast, Side Shift, s/n 13717
LIFT RITE L68 Electric Walkie, 1,500lb Cap., s/n 2942
BAXTER VERTICUT Roll-In Saw
E-R MAIER Roll-In Saw
LASER STAR Engraving Machine
BERG PA-M21-P5 Portable Air-Cooled Chiller, s/n S03287-RC1-0717
FRONIUS MagicWave 2500 Welder, s/n 25073848
PLUS: LISTA Heavy Duty Storage Cabinets, Precision Instruments, Micrometers, Height Gauges, Verniers, Workbenches, Racking, Power & Hand Tools, Hardware, Tool Holders, Perishable Tooling, Welders, Tool Setters, Granite Plates, Toolboxes, Eye Bolts, Shackles, Lifting Magnets, Machine Vises, Tool Cutter Grinders, Floor Scales, Office Equipment & Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday February 21st, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
USD WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC ROYAL BANK
3300 HIGHWAY #7, WEST
CONCORD, ONTARIO L4K 1A5
BENEFICIARY NAME:
INFINITY ASSET SOLUTIONS INC.
63 MAPLECRETE ROAD
CONCORD, ONTARIO L4K 1A5
ACCOUNT #: 4010286
TRANSIT #: 00192
BANK #: 003
SWIFT CODE: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Tags: Vise, Machine Vise