19
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
19
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
For Infinity Asset Solutions Inc delivery information please telephone 905-669-8893.
Auction Date & Time: lots start closing on Wed. 04/23/2025 12:00 pm Eastern Time
Location: 655 42 Ave NE #2, Calgary, AB, T2E 6S1
Inspection: Tuesday April 22nd, 9AM - 5PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring:
CNC MACHINING CENTERS
2007 MORI SEIKI NT4200/1000 SZ CNC Multi Axis CNC Machining Center, MORI SEIKI MSX-711III Fanuc CNC Control, Dual Spindle, Swing 28.7”, Turning Diameter 25.9”, Centre Distance 42.5”, Bar Capacity 2.5”, Y Axis 8.3”, Z Axis 44.1”,12,000 RPM 8” Main Milling Head, 30 HP, Spindle Speed 5,000 RPM, Lower Turret w/Live Tooling, 12,000 RPM Milling Speed, 25HP, Sub Spindle 5,000 RPM, 30HP Motor, Coolant Thru Spindle - High Pressure, Turret Capacity 12 Stations, ATC Capacity 100 Stations, Turbo Systems Chip Conveyor, Filter Mister FX2000, s/n NT420GF0137
2007 MORI SEIKI NT4200/1000S CNC Multi Axis CNC Machining Center, MORI SEIKI MSX-711III Fanuc CNC Control, Dual Spindle, Swing 28.7”, Turning Diameter 25.9”, Centre Distance 42.5”, Bar Capacity 2.5”, Y Axis 8.3”, Z Axis 44.1”,12,000 RPM 8” Main Milling Head, 30 HP, Spindle Speed 5,000 RPM, 12,000 RPM Milling Speed, 25HP, Sub Spindle 5,000 RPM, 30HP Motor, Coolant Thru Spindle - High Pressure, ATC Capacity 100 Stations, Turbo Systems Chip Conveyor, Filter Mister FX3000, s/n NT420GA0113
2010 MATSUURA V. PLUS-1000 CNC Vertical Machining Center, Matsuura G-Tech 30i CNC Control, Table Size 45.25 X 21.50, X Axis 40.15, Y Axis 21.65, Z Axis 19.68, 30Hp Spindle Motor, 30 Tool ATC, Filter Mister FX2000, s/n 18228, Approx. 11,686 Cutting Hours
CNC TURNING
2010 NAKAMURA-TOME SC-200L MYS CNC Turning Center, Fanuc Series 18i-TB CNC Control, 12/24-Station Turret, Live Tooling, C-Axis, Y Axis, Programable Tail Stock. Chip Conveyor, Filter FX2000 Mist Collector, High Pressure Coolant, s/n 200503, 7700 cutting hours
2007 NAKAMURA-TOME SC-200L MYS CNC Turning Center, Fanuc Series 18i-TB CNC Control,12/24-Station Turret, 8” chuck, Live Tooling, C-Axis, Y Axis, Programable Tail Stock. Chip Conveyor, Filter Mist FX2000 Collector, High Pressure Coolant, Cutting Time 11,120 Hrs, s/n 200101
2004 NAKAMURA-TOME SC-300 CNC Turning Center, Fanuc Series 21-T CNC Control, 13” Swing, 12” 3- Jaw Chuck, Tool Presetter, 30 HP, Chip Conveyor, Filter Mist FX2000 Collector, s/n S308401, approx. 8,700 Cutting Hours
2010 WEILER E50X2000 CNC Turning Center, CNC Control, 3-Jaw Chuck, 22.44” Swing, 78” Between Centers, 3.250” bore, 2500 RPM, 20 HP, 12” 3 Jaw Self Centering Chuck, Steady Rest, Turret Tool Post, Boring Bar Holder, Tailstock, Parat Tool Post, Chip Conveyor, s/n FB04
LATHES & MILLING MACHINES
SUMMIT 24X80B Lathe w/ Digital Read Out, 12” 3-Jaw Chuck, 25/33” Swing/Gap, 80” Bed, 4” Thru Hole, Taper Attachment. Tailstock, Quick Change Tool Post, Steady Rest,15HP, s/n 39697
CHEVALIER FM-4VKH Vertical Milling Machine, 10” x 54” table, ACU-RITE DRO, Power Draw Bar, 40 Taper, s/n FM 85A514
SAWS
2014 DOALL C-305A Automatic Horizontal Bandsaw, Auto Index & Feed, 12” X 12” Cap., 5 HP/208v/3, band length 144”, s/n 60714112
GRINDERS
2000 CHEVALIER Model CG-1224A Cylindrical Grinder, 12’ x 24” Capacity, 90 Deg Swivel Head, 350 RPM Spindle, 5HP, s/n GF39908
2001 KENT KGS-250A11D HD Surface Grinder, 8" x 18" Kent 10” x 20” Magnetic Chuck, s/n 015440
QUALITY CONTROL
2010 ZEISS ACCURA – MASS Model 9/12/7 CMM, Table Size 44” X 59”, X Travel 35.40”, Y Travel 47.20” Z Travel 27.60”, c/w Asst Probes, s/n 153898
2005 MITUTOYO QM-Measure 353 CMM, Renishaw Probe, QM-Data 300 Digital Control, Model 198-314, s/n BH000040
MITUTOYO PH-3500 Optical Comparator, QM-Data 200 Digital Control, s/n R00071010
DYNAMOMETER
2006 SOFT-ENGINE BRAKER ENGINE 150 Dynamometer, Max Power 150HP, s/n 150EN549
FORKLIFT
TOYOTA 7FGCU25 Propane Forklift, 3,750lb Cap., Side Shift, 189” Max Lift, 3-Stage Mast, Outdoor Tires, s/n 73922, Approx. 2,700hrs
PLANT SUPPORT EQUIPMENT
SUNNEN LBB-1660 Precision Hone, ID Range 06” to 6.5”, Max Range 16”, 200 – 1,600 RPM, w/Mandrel Tooling
TELESIS PINSTAMP TMC 1700 Marking System
MEGA POINT Blue Line Drill Sharpener, s/n 03606
MOD-U-BLAST M300-1C Sand Blast Cabinet, s/n 20448 w/ Dust Collector
BOGE C20 Rotary Screw Air Compressor
PURESTREAM Air Dryer Model ACT75U-1
KAESER SK 20 Air Compressor w/ Accessories
LARGE QTY. Precision Instruments, Height Gauges, Verniers, Micrometers, Vises, Rotary Tables, Granite Surface Plates, Angle Plates
TOOLING INCLUDING Tool Holders & Carts, Live Tooling, Chucks, Collets, Boring Bars
PLUS
Jib Cranes, Gauges, Workbenches, Husky Tool Cabinets, Power & Hand Tools, Raw Material, WIP, Office Equipment & Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Joiner Sales Corp., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 4PM THURSDAY, APRIL 24TH, 2025.
An 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, tiffany@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
ROYAL BANK OF CANADA
Century Park Branch
11010-23 Avenue, NW
Edmonton, AB
(780) 448-6370
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C.
V2T 6K7
(604) 852-8711
Account #: 100-050-4
Transit #: 04089
Institution #: 003
Swift BIC Code: ROYCCAT2
IBAN#:003040891000504
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
For Infinity Asset Solutions Inc delivery information please telephone 905-669-8893.
Auction Date & Time: lots start closing on Wed. 04/23/2025 12:00 pm Eastern Time
Location: 655 42 Ave NE #2, Calgary, AB, T2E 6S1
Inspection: Tuesday April 22nd, 9AM - 5PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring:
CNC MACHINING CENTERS
2007 MORI SEIKI NT4200/1000 SZ CNC Multi Axis CNC Machining Center, MORI SEIKI MSX-711III Fanuc CNC Control, Dual Spindle, Swing 28.7”, Turning Diameter 25.9”, Centre Distance 42.5”, Bar Capacity 2.5”, Y Axis 8.3”, Z Axis 44.1”,12,000 RPM 8” Main Milling Head, 30 HP, Spindle Speed 5,000 RPM, Lower Turret w/Live Tooling, 12,000 RPM Milling Speed, 25HP, Sub Spindle 5,000 RPM, 30HP Motor, Coolant Thru Spindle - High Pressure, Turret Capacity 12 Stations, ATC Capacity 100 Stations, Turbo Systems Chip Conveyor, Filter Mister FX2000, s/n NT420GF0137
2007 MORI SEIKI NT4200/1000S CNC Multi Axis CNC Machining Center, MORI SEIKI MSX-711III Fanuc CNC Control, Dual Spindle, Swing 28.7”, Turning Diameter 25.9”, Centre Distance 42.5”, Bar Capacity 2.5”, Y Axis 8.3”, Z Axis 44.1”,12,000 RPM 8” Main Milling Head, 30 HP, Spindle Speed 5,000 RPM, 12,000 RPM Milling Speed, 25HP, Sub Spindle 5,000 RPM, 30HP Motor, Coolant Thru Spindle - High Pressure, ATC Capacity 100 Stations, Turbo Systems Chip Conveyor, Filter Mister FX3000, s/n NT420GA0113
2010 MATSUURA V. PLUS-1000 CNC Vertical Machining Center, Matsuura G-Tech 30i CNC Control, Table Size 45.25 X 21.50, X Axis 40.15, Y Axis 21.65, Z Axis 19.68, 30Hp Spindle Motor, 30 Tool ATC, Filter Mister FX2000, s/n 18228, Approx. 11,686 Cutting Hours
CNC TURNING
2010 NAKAMURA-TOME SC-200L MYS CNC Turning Center, Fanuc Series 18i-TB CNC Control, 12/24-Station Turret, Live Tooling, C-Axis, Y Axis, Programable Tail Stock. Chip Conveyor, Filter FX2000 Mist Collector, High Pressure Coolant, s/n 200503, 7700 cutting hours
2007 NAKAMURA-TOME SC-200L MYS CNC Turning Center, Fanuc Series 18i-TB CNC Control,12/24-Station Turret, 8” chuck, Live Tooling, C-Axis, Y Axis, Programable Tail Stock. Chip Conveyor, Filter Mist FX2000 Collector, High Pressure Coolant, Cutting Time 11,120 Hrs, s/n 200101
2004 NAKAMURA-TOME SC-300 CNC Turning Center, Fanuc Series 21-T CNC Control, 13” Swing, 12” 3- Jaw Chuck, Tool Presetter, 30 HP, Chip Conveyor, Filter Mist FX2000 Collector, s/n S308401, approx. 8,700 Cutting Hours
2010 WEILER E50X2000 CNC Turning Center, CNC Control, 3-Jaw Chuck, 22.44” Swing, 78” Between Centers, 3.250” bore, 2500 RPM, 20 HP, 12” 3 Jaw Self Centering Chuck, Steady Rest, Turret Tool Post, Boring Bar Holder, Tailstock, Parat Tool Post, Chip Conveyor, s/n FB04
LATHES & MILLING MACHINES
SUMMIT 24X80B Lathe w/ Digital Read Out, 12” 3-Jaw Chuck, 25/33” Swing/Gap, 80” Bed, 4” Thru Hole, Taper Attachment. Tailstock, Quick Change Tool Post, Steady Rest,15HP, s/n 39697
CHEVALIER FM-4VKH Vertical Milling Machine, 10” x 54” table, ACU-RITE DRO, Power Draw Bar, 40 Taper, s/n FM 85A514
SAWS
2014 DOALL C-305A Automatic Horizontal Bandsaw, Auto Index & Feed, 12” X 12” Cap., 5 HP/208v/3, band length 144”, s/n 60714112
GRINDERS
2000 CHEVALIER Model CG-1224A Cylindrical Grinder, 12’ x 24” Capacity, 90 Deg Swivel Head, 350 RPM Spindle, 5HP, s/n GF39908
2001 KENT KGS-250A11D HD Surface Grinder, 8" x 18" Kent 10” x 20” Magnetic Chuck, s/n 015440
QUALITY CONTROL
2010 ZEISS ACCURA – MASS Model 9/12/7 CMM, Table Size 44” X 59”, X Travel 35.40”, Y Travel 47.20” Z Travel 27.60”, c/w Asst Probes, s/n 153898
2005 MITUTOYO QM-Measure 353 CMM, Renishaw Probe, QM-Data 300 Digital Control, Model 198-314, s/n BH000040
MITUTOYO PH-3500 Optical Comparator, QM-Data 200 Digital Control, s/n R00071010
DYNAMOMETER
2006 SOFT-ENGINE BRAKER ENGINE 150 Dynamometer, Max Power 150HP, s/n 150EN549
FORKLIFT
TOYOTA 7FGCU25 Propane Forklift, 3,750lb Cap., Side Shift, 189” Max Lift, 3-Stage Mast, Outdoor Tires, s/n 73922, Approx. 2,700hrs
PLANT SUPPORT EQUIPMENT
SUNNEN LBB-1660 Precision Hone, ID Range 06” to 6.5”, Max Range 16”, 200 – 1,600 RPM, w/Mandrel Tooling
TELESIS PINSTAMP TMC 1700 Marking System
MEGA POINT Blue Line Drill Sharpener, s/n 03606
MOD-U-BLAST M300-1C Sand Blast Cabinet, s/n 20448 w/ Dust Collector
BOGE C20 Rotary Screw Air Compressor
PURESTREAM Air Dryer Model ACT75U-1
KAESER SK 20 Air Compressor w/ Accessories
LARGE QTY. Precision Instruments, Height Gauges, Verniers, Micrometers, Vises, Rotary Tables, Granite Surface Plates, Angle Plates
TOOLING INCLUDING Tool Holders & Carts, Live Tooling, Chucks, Collets, Boring Bars
PLUS
Jib Cranes, Gauges, Workbenches, Husky Tool Cabinets, Power & Hand Tools, Raw Material, WIP, Office Equipment & Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Joiner Sales Corp., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 4PM THURSDAY, APRIL 24TH, 2025.
An 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, tiffany@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
ROYAL BANK OF CANADA
Century Park Branch
11010-23 Avenue, NW
Edmonton, AB
(780) 448-6370
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C.
V2T 6K7
(604) 852-8711
Account #: 100-050-4
Transit #: 04089
Institution #: 003
Swift BIC Code: ROYCCAT2
IBAN#:003040891000504
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Tags: Heat Gun