1E
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
1E
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
BROWN & SHARPE MVAL PFX 4-5-4 CMM, S/N 0997-1912
For Infinity Asset Solutions Inc delivery information please telephone 905-669-8893.
Auction Date & Time: lots start closing on Thurs. 06/12/2025 11:00 am
Location: 440 Thompson Dr, Cambridge, ON, N1T 2K8
Inspection: Wednesday June 11th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring:
CNC Machining
2004 DAHLIH DL-MCV1700 CNC Vertical Machining Center, s/n 3001090165, 6,000 RPM, Fanuc Series 18-M CNC Control, Travels: X-66.95”, Y-33.45”, Z-29.53”, (32) ATC, Habor HBO-750PSB3-11Chiller, Yeoshe V23A2R-1X Hydraulic Pump
2001 TAKUMI V11A CNC Vertical Machining Center, s/n G0975, Mitsubishi MELDAS 500 CNC Control, Travels: X-43.3”, Y-20”, Z-22”, 25” x 53” Table, CAT40, Habor HBO-250PTB Chiller
DAHLIH DL-MCV1020 CNC Vertical Machining Center, Fanuc Series O-M CNC Control, BT40, s/n 1020868
ZPS MCFV 1680 NT CNC Vertical Machining Center
Presses
USI-VICKERS CLEARING S-600-120-72 Straight Side Press, 600-Ton Cap., 72” x 120” Bed, 29” – 53” Shut Height, 20” Stroke
HAMILTON 849 Straight Side Press, 250-Ton Cap., 60” x 84” Bed, 24” – 34” Shut Height, 12” Stroke
ROWE 1003-DSJ Uncoiler, s/n 24910, Max Coil ID 25”, Min Coil ID 18”, Max Coild OD 72”, Max Coil Width 31”, Max Wight 8,000lbs
ROWE C3-30 Straightener, s/n 24911, Max Material .150” Mild Steel, Min Material .020” Mild Steel, Max Coil Width 30”, # Rollers 11 -7 Straightening – 4 Pinch, Rollers 3.5”Dia. 4.5” C to C
MECON F30PLFeeder, s/n 1017, Max Coil Width 31”
Milling Machines
2005 RACER-TECH RMC3 Vertical Milling Machine, Heidenhain 2-Axis DRO, Align Power Feed, Speeds to 3,800 RPM< 3HP, 10” x 50” Table, s/n 746024
(2) 2012 FIRST LC-185VS-B Vertical Milling Machines, Heidenhain DRO, 10” x 50” Table, 31” Longitudinal Travel, 16.3” Cross Travel, 15.3” Vertical Travel, Power Draw Bar, s/n’s 10303566, 10303573
(3) FIRST LC-185VS Vertical Milling Machines, Heidenhain DRO, 10” x 50” Table, 31” Longitudinal Travel, 16.3” Cross Travel, 15.3” Vertical Travel, s/n’s 30505189, 4101055, 51202051
DARBERT VBM-4V Vertical Milling Machine, Heidenhain 2-Axis DRO, 18” x 75” Table, s/n 6189
TOS-KURIM FA5B-H Universal Milling Machine, Heidenhain 3-Axis DRO, 18” x 79” Table, s/n 24382
ZAYER Horizontal Milling Machine, 12” x 63” Table
Lathes
2012 ECOCA SJ-2260G Lathe, Fagor 2-Axis DRO, 24” Swing, 76” Bed, 3.25” Bore, 3-Jaw Chuck, Tool Post, Multi-Position Tool Post, s/n E1TAB0587
HAVLIK C6242 Lathe, Mitutoyo 2-Axis DRO, 22” Swing, 80” Bed, 3.25” Bore, 3 & 4-Jaw Chucks, Tailstock, Tool Post, Steady Rests, s/n 141
EDM’s
FANUC CNC Wire EDM
CHMER CNC CD-305G Wire EDM
Grinders
NUWAY PFG-CL3060AH Surface Grinder, s/n 1035111, Saddle 11.75”, Slide 23.5”, Table to Spindle Center 19.5”
CHEVALIER FSG-3A818 Surface Grinder, s/n M384A005, Saddle 8”, Slide 18”, Table to Spindle Cetner 18”
(3) CHEVALIER FSG-618M Surface Grinders, Saddle 6”, Slide 18”, Table to Spindle Center 19.5”, s/n’s A3848002, A3936007, A3937002
KENT KGS-618 Surface Grinder, Saddle 6”, Slide 18”, Table to Spindle Center 21”
BLANCHARD No 18 Rotary Surface Grinder, s/n 3908
POWERMATIC 30 Belt / Disc Grinder, s/n 65-5272-3, Disc Size 10”
FORD SMITH 40-P Pedestal Grinder, s/n 6800 8
(2) RYOBI 8” Bench Grinders
Drills
(2) MAS V050 Radial Arm Drills, 6’ Arm, s/n’s 297, 189
MAS V0-32 Radial Arm Drill, 4’ Arm, s/n 653
Saws
BAXTER VERTICUT 115B Roll-in Bandsaw, s/n 4261
BAXTER VERTICUT 1153 Roll-in Bandsaw, s/n 5387
CMM
BROWN & SHARPE MVAL PFX 4-5-4 CMM, s/n 0997-1912
Welders
THERMAL DYNAMICS CUTMASTER 32 Plasma Cutter
HOBART Stellar AT DC-CC/CV Welder, s/n KK221602 w/ MILLER CS-22 P12 Wire Feeder & BERNARD T-Gun
THERMAL ARC Welder
Material Handling
HYSTER S80XLBCS Propane Forklift, 7,800lb Cap., 172” Max Lift, 3-Stage Mast, Side Shift, Solid Tires, s/n D004D08524X
(2) Jib Cranes
MOBILE MATERIALS B70FP Hydraulic Platform Lift, 1,500lb Cap., s/n 8221
MOBILE MATERIALS B50FP Hydraulic Platform Lift, 1,500lb Cap., s/n 8293
ECOA Platform Lift, 500lb Cap.
SA ARMSTRONG FH-60 Hydraulic Platform Lift, 750lb Cap.
(2) ECOLIFT, KLETON Pallet Jacks
Plant Support
EMPIRE EF-2430 Sandblast Cabinet, s/n C-8682
2015 Q-AIR QMV-30WDD Dust Collector, s/n 2015011, 575VAC, 3 PH, 3HP, 3A
NILFISK-ADVANCE Convertamatic 200B Floor Cleaner
PLUS: Precision Instruments, Micrometers, Verniers, Height Gauges, Tooling, Metal Horses, Power & Hand Tools, Shop Carts, Racking, Tool Holders, Angle Plates, Heavy Duty Tool Storage Cabinets, Dump Hoppers, Drill Sharpener, Welding Supplies, Rigging Chains, Swivel Eye Bolts, Shackles, Office Equipment and Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday June 13th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
BROWN & SHARPE MVAL PFX 4-5-4 CMM, S/N 0997-1912
For Infinity Asset Solutions Inc delivery information please telephone 905-669-8893.
Auction Date & Time: lots start closing on Thurs. 06/12/2025 11:00 am
Location: 440 Thompson Dr, Cambridge, ON, N1T 2K8
Inspection: Wednesday June 11th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring:
CNC Machining
2004 DAHLIH DL-MCV1700 CNC Vertical Machining Center, s/n 3001090165, 6,000 RPM, Fanuc Series 18-M CNC Control, Travels: X-66.95”, Y-33.45”, Z-29.53”, (32) ATC, Habor HBO-750PSB3-11Chiller, Yeoshe V23A2R-1X Hydraulic Pump
2001 TAKUMI V11A CNC Vertical Machining Center, s/n G0975, Mitsubishi MELDAS 500 CNC Control, Travels: X-43.3”, Y-20”, Z-22”, 25” x 53” Table, CAT40, Habor HBO-250PTB Chiller
DAHLIH DL-MCV1020 CNC Vertical Machining Center, Fanuc Series O-M CNC Control, BT40, s/n 1020868
ZPS MCFV 1680 NT CNC Vertical Machining Center
Presses
USI-VICKERS CLEARING S-600-120-72 Straight Side Press, 600-Ton Cap., 72” x 120” Bed, 29” – 53” Shut Height, 20” Stroke
HAMILTON 849 Straight Side Press, 250-Ton Cap., 60” x 84” Bed, 24” – 34” Shut Height, 12” Stroke
ROWE 1003-DSJ Uncoiler, s/n 24910, Max Coil ID 25”, Min Coil ID 18”, Max Coild OD 72”, Max Coil Width 31”, Max Wight 8,000lbs
ROWE C3-30 Straightener, s/n 24911, Max Material .150” Mild Steel, Min Material .020” Mild Steel, Max Coil Width 30”, # Rollers 11 -7 Straightening – 4 Pinch, Rollers 3.5”Dia. 4.5” C to C
MECON F30PLFeeder, s/n 1017, Max Coil Width 31”
Milling Machines
2005 RACER-TECH RMC3 Vertical Milling Machine, Heidenhain 2-Axis DRO, Align Power Feed, Speeds to 3,800 RPM< 3HP, 10” x 50” Table, s/n 746024
(2) 2012 FIRST LC-185VS-B Vertical Milling Machines, Heidenhain DRO, 10” x 50” Table, 31” Longitudinal Travel, 16.3” Cross Travel, 15.3” Vertical Travel, Power Draw Bar, s/n’s 10303566, 10303573
(3) FIRST LC-185VS Vertical Milling Machines, Heidenhain DRO, 10” x 50” Table, 31” Longitudinal Travel, 16.3” Cross Travel, 15.3” Vertical Travel, s/n’s 30505189, 4101055, 51202051
DARBERT VBM-4V Vertical Milling Machine, Heidenhain 2-Axis DRO, 18” x 75” Table, s/n 6189
TOS-KURIM FA5B-H Universal Milling Machine, Heidenhain 3-Axis DRO, 18” x 79” Table, s/n 24382
ZAYER Horizontal Milling Machine, 12” x 63” Table
Lathes
2012 ECOCA SJ-2260G Lathe, Fagor 2-Axis DRO, 24” Swing, 76” Bed, 3.25” Bore, 3-Jaw Chuck, Tool Post, Multi-Position Tool Post, s/n E1TAB0587
HAVLIK C6242 Lathe, Mitutoyo 2-Axis DRO, 22” Swing, 80” Bed, 3.25” Bore, 3 & 4-Jaw Chucks, Tailstock, Tool Post, Steady Rests, s/n 141
EDM’s
FANUC CNC Wire EDM
CHMER CNC CD-305G Wire EDM
Grinders
NUWAY PFG-CL3060AH Surface Grinder, s/n 1035111, Saddle 11.75”, Slide 23.5”, Table to Spindle Center 19.5”
CHEVALIER FSG-3A818 Surface Grinder, s/n M384A005, Saddle 8”, Slide 18”, Table to Spindle Cetner 18”
(3) CHEVALIER FSG-618M Surface Grinders, Saddle 6”, Slide 18”, Table to Spindle Center 19.5”, s/n’s A3848002, A3936007, A3937002
KENT KGS-618 Surface Grinder, Saddle 6”, Slide 18”, Table to Spindle Center 21”
BLANCHARD No 18 Rotary Surface Grinder, s/n 3908
POWERMATIC 30 Belt / Disc Grinder, s/n 65-5272-3, Disc Size 10”
FORD SMITH 40-P Pedestal Grinder, s/n 6800 8
(2) RYOBI 8” Bench Grinders
Drills
(2) MAS V050 Radial Arm Drills, 6’ Arm, s/n’s 297, 189
MAS V0-32 Radial Arm Drill, 4’ Arm, s/n 653
Saws
BAXTER VERTICUT 115B Roll-in Bandsaw, s/n 4261
BAXTER VERTICUT 1153 Roll-in Bandsaw, s/n 5387
CMM
BROWN & SHARPE MVAL PFX 4-5-4 CMM, s/n 0997-1912
Welders
THERMAL DYNAMICS CUTMASTER 32 Plasma Cutter
HOBART Stellar AT DC-CC/CV Welder, s/n KK221602 w/ MILLER CS-22 P12 Wire Feeder & BERNARD T-Gun
THERMAL ARC Welder
Material Handling
HYSTER S80XLBCS Propane Forklift, 7,800lb Cap., 172” Max Lift, 3-Stage Mast, Side Shift, Solid Tires, s/n D004D08524X
(2) Jib Cranes
MOBILE MATERIALS B70FP Hydraulic Platform Lift, 1,500lb Cap., s/n 8221
MOBILE MATERIALS B50FP Hydraulic Platform Lift, 1,500lb Cap., s/n 8293
ECOA Platform Lift, 500lb Cap.
SA ARMSTRONG FH-60 Hydraulic Platform Lift, 750lb Cap.
(2) ECOLIFT, KLETON Pallet Jacks
Plant Support
EMPIRE EF-2430 Sandblast Cabinet, s/n C-8682
2015 Q-AIR QMV-30WDD Dust Collector, s/n 2015011, 575VAC, 3 PH, 3HP, 3A
NILFISK-ADVANCE Convertamatic 200B Floor Cleaner
PLUS: Precision Instruments, Micrometers, Verniers, Height Gauges, Tooling, Metal Horses, Power & Hand Tools, Shop Carts, Racking, Tool Holders, Angle Plates, Heavy Duty Tool Storage Cabinets, Dump Hoppers, Drill Sharpener, Welding Supplies, Rigging Chains, Swivel Eye Bolts, Shackles, Office Equipment and Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Friday June 13th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Tags: Sharpe, CMM