61
Lot
61
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
For Infinity Asset Solutions Inc delivery information please telephone 905-669-8893.
Auction Date & Time: lots start closing on Tues. 07/08/2025 11:00 am
Location: 1610 Feldspar Ct, Pickering, ON, L1W 3R7
Inspection: Monday July 7th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring
Tank Turning Rolls
(2) JOE FULLER JFR1-90 270,000lb Cap. Tank Turning Rolls w/ JFRD-90 Powered Rolls and (2) Sets of Idlers, 12” – 21’ Diameter Range
(2) JOE FULLER JFR1-60 180,000lb Cap. Tank Turning Rolls w/ JFRD-60 Powered Rolls and (2) Sets of Idlers, 12” - 21’ Diameter Range
Custom Built 180,000lb Cap. Tank Turning Rolls w/ Powered Rolls and (2) Sets of Idlers, 12” – 21’ Diameter Range
(3) JOE FULLER JFR1-30 90,000lb Cap. Tank Turning Rolls w/ JFRD30 Powered Rolls and (2) Sets of Idlers, 12” – 21’ Diameter Range
Custom Built 90,000lb Cap. Tank Turning Rolls w/ Powered Rolls and (2) Sets of Idlers
(4) Custom Built 30,000lb Cap. Tank Turning Rolls, 12” – 21’ Diameter Range
Plate Bending Rolls
SMT-PULLMAX PV7H Hydraulic Plate Bending Rolls, Max Bending Cap. 2-1/2” x 10’, Cone Bending Cap. 1-3/16” x 10’, 23-7/16” Dia. Bending Rolls, Hydraulic Drop End & Hydraulic Roll Adjustment, s/n 4470
Angle Rolls
SMT-PULLMAX Z100 Hydraulic Angle Rolls
Seam Welders
Custom Built Baby George Seam Welder, 12’ Travel, LINCOLN ELECTRIC DC-650 Pro Power Source, LINCOLN ELECTRIC NA-3N Wire Feeder, LINCOLN ELECTRIC Arc Welding Head, AMERICAN VAC Arco Wand Recovery Unit, PLC Controls
BRADLEY Big George Custom Built Seam Welder, Power Source, LINCOLN ELECTRIC NA-3N Wire Feeder
Spotting Press
FIELDING & PLATT Hydraulic Spotting Press
Ironworker
EDWARDS Jaw IV Hydraulic Ironworker, 100-Ton Cap., s/n 159410006
Press Brake
SCHARRINGHAUSEN Hydraulic Press Brake, 400-Ton x 12’ Cap.
Shear
CINCINNATI 6208 Shear, 8’ x ¾” Cap., s/n 10978
Welders
LINCOLN ELECTRIC PowerMig 255C Welder
LINCOLN ELECTRIC IdealArc R3R-500 Welder
LINCOLN ELECTRIC SA-800 Welder
LINCOLN ELECTRIC CV-300 Welder w/ LN-7 Wire Feeder
LINCOLN ELECTRIC Wire-Matic 255 Welder
MEMCO D-4-55 Welder
LINCOLN ELECTRIC S7046 SAE Welder
ESAB 452 CVCC Welder
MEMCO DC-4-SS Welder
LINCOLN ELECTRIC CV-300 Welder w/ LN-7 Wire Feeder
MEMCO DC-452G5 Welder
LINCOLN ELECTRIC Ideal Arc R3R-400 Welder
LINCOLN ELECTRIC Ideal Arc R3R-500 Welder
MEMCO CV-651 Welder w/ AIRCO Wire Feeder
PRO-LINE CV-51 Welder w/ AIRCO Wire Feeder
HOBART Cyberweld 452 Welder w/ Wire Feeder
LINCOLN ELECTRIC CV-400 Welder w/ LN-7 Wire Feeder
(2) LINCOLN ELECTRIC CV-300 Welders w/ LN-7 Wire Feeders
Forklifts
CLARK CHY150T Propane Forklift, 14,850lb Cap., Dual Front Tires, Single Stage Mast, s/n HY1015-53-2208
HYSTER 100 XL2 Propane Forklift, Dual Front Tires
Plant Support Equipment
BAXTER VERTICUT 260 Horizontal Bandsaw
WILLIS / GRID RD-1100 Radial Arm Drill, 4’ Arm, s/n 12458-5190
PANDJIRIS Beta 12.5-5 HS Welding Positioner, 1,250lb Cap., s/n 4007941
SKYJACK SJIII-4626 Electric Scissor Lift
ATLAS COPCO TA-025TAN2C Air Compressor, 125HP
INGERSOLL RAND T30 Air Compressor, 20HP, s/n 787504
SWAN Piston Type Air Compressor, 15HP
FORD-SMITH Dual Pedestal Grinder
PLUS: Heavy Duty Lifting Chains, Shackles, Plate Grabbers, Power & Hand Tools, Heavy Duty Metal Stands and Support, Office Equipment and Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Wednesday July 9th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
For Infinity Asset Solutions Inc delivery information please telephone 905-669-8893.
Auction Date & Time: lots start closing on Tues. 07/08/2025 11:00 am
Location: 1610 Feldspar Ct, Pickering, ON, L1W 3R7
Inspection: Monday July 7th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Featuring
Tank Turning Rolls
(2) JOE FULLER JFR1-90 270,000lb Cap. Tank Turning Rolls w/ JFRD-90 Powered Rolls and (2) Sets of Idlers, 12” – 21’ Diameter Range
(2) JOE FULLER JFR1-60 180,000lb Cap. Tank Turning Rolls w/ JFRD-60 Powered Rolls and (2) Sets of Idlers, 12” - 21’ Diameter Range
Custom Built 180,000lb Cap. Tank Turning Rolls w/ Powered Rolls and (2) Sets of Idlers, 12” – 21’ Diameter Range
(3) JOE FULLER JFR1-30 90,000lb Cap. Tank Turning Rolls w/ JFRD30 Powered Rolls and (2) Sets of Idlers, 12” – 21’ Diameter Range
Custom Built 90,000lb Cap. Tank Turning Rolls w/ Powered Rolls and (2) Sets of Idlers
(4) Custom Built 30,000lb Cap. Tank Turning Rolls, 12” – 21’ Diameter Range
Plate Bending Rolls
SMT-PULLMAX PV7H Hydraulic Plate Bending Rolls, Max Bending Cap. 2-1/2” x 10’, Cone Bending Cap. 1-3/16” x 10’, 23-7/16” Dia. Bending Rolls, Hydraulic Drop End & Hydraulic Roll Adjustment, s/n 4470
Angle Rolls
SMT-PULLMAX Z100 Hydraulic Angle Rolls
Seam Welders
Custom Built Baby George Seam Welder, 12’ Travel, LINCOLN ELECTRIC DC-650 Pro Power Source, LINCOLN ELECTRIC NA-3N Wire Feeder, LINCOLN ELECTRIC Arc Welding Head, AMERICAN VAC Arco Wand Recovery Unit, PLC Controls
BRADLEY Big George Custom Built Seam Welder, Power Source, LINCOLN ELECTRIC NA-3N Wire Feeder
Spotting Press
FIELDING & PLATT Hydraulic Spotting Press
Ironworker
EDWARDS Jaw IV Hydraulic Ironworker, 100-Ton Cap., s/n 159410006
Press Brake
SCHARRINGHAUSEN Hydraulic Press Brake, 400-Ton x 12’ Cap.
Shear
CINCINNATI 6208 Shear, 8’ x ¾” Cap., s/n 10978
Welders
LINCOLN ELECTRIC PowerMig 255C Welder
LINCOLN ELECTRIC IdealArc R3R-500 Welder
LINCOLN ELECTRIC SA-800 Welder
LINCOLN ELECTRIC CV-300 Welder w/ LN-7 Wire Feeder
LINCOLN ELECTRIC Wire-Matic 255 Welder
MEMCO D-4-55 Welder
LINCOLN ELECTRIC S7046 SAE Welder
ESAB 452 CVCC Welder
MEMCO DC-4-SS Welder
LINCOLN ELECTRIC CV-300 Welder w/ LN-7 Wire Feeder
MEMCO DC-452G5 Welder
LINCOLN ELECTRIC Ideal Arc R3R-400 Welder
LINCOLN ELECTRIC Ideal Arc R3R-500 Welder
MEMCO CV-651 Welder w/ AIRCO Wire Feeder
PRO-LINE CV-51 Welder w/ AIRCO Wire Feeder
HOBART Cyberweld 452 Welder w/ Wire Feeder
LINCOLN ELECTRIC CV-400 Welder w/ LN-7 Wire Feeder
(2) LINCOLN ELECTRIC CV-300 Welders w/ LN-7 Wire Feeders
Forklifts
CLARK CHY150T Propane Forklift, 14,850lb Cap., Dual Front Tires, Single Stage Mast, s/n HY1015-53-2208
HYSTER 100 XL2 Propane Forklift, Dual Front Tires
Plant Support Equipment
BAXTER VERTICUT 260 Horizontal Bandsaw
WILLIS / GRID RD-1100 Radial Arm Drill, 4’ Arm, s/n 12458-5190
PANDJIRIS Beta 12.5-5 HS Welding Positioner, 1,250lb Cap., s/n 4007941
SKYJACK SJIII-4626 Electric Scissor Lift
ATLAS COPCO TA-025TAN2C Air Compressor, 125HP
INGERSOLL RAND T30 Air Compressor, 20HP, s/n 787504
SWAN Piston Type Air Compressor, 15HP
FORD-SMITH Dual Pedestal Grinder
PLUS: Heavy Duty Lifting Chains, Shackles, Plate Grabbers, Power & Hand Tools, Heavy Duty Metal Stands and Support, Office Equipment and Much More!
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Wednesday July 9th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: TBD
Accounting: Victoria 905-669-8893 Ext. 207, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
CANADIAN WIRE TRANSFER INSTRUCTIONS
Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO
Beneficiary Customer:
INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137
TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Tags: Cincinnati, Shear