47
Lot
47
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.
REMOVAL INFO:
Removal hours 8AM - 4PM daily starting Thursday, July 31st, 2025 . Final Removal by 4PM Tues., Aug., 12th, 2025.
REMOVAL SERVICES
Buyers are required to provide their own rigging service.
RIGGERS (Auctioneer suggestions)
Belton Direct Rigging & Industrial Services
- Contact: Project Manager / Estimator
- 778-938-5585 (Office)
- 604-348-6143 (Mobile )
whollowink@bdrigging.com
Rolston Crane & Freight
Port Coquitlam, BC
(604) 468-9920
Eagle West Crane & Rigging
Abbotsford, BC
1-800-667-2215
Global Rigging & Transport
- 19399 96 Ave, Surrey, BC V4N 4C4
- Contact: Derek Jost
- 604-513-8468 (Office)
- 778-808-6728 (Mobile)
d.jost@globalrigging.com
Diehard Tools
- Contact: Edward Suderman
- 604-825-8531 (Mobile)
diehardtools@gmail.com
CRANE TRUCK COMPANIES
JK TRUCK & CRANE
Contact: Kevin Johnson
604-309-7000 / 604-824-1455
jkcranetruck@hotmail.com
TRUCKING SERVICE
Machine Freight
Contact: Peter Teichroeb
236-602-2878 (Office)
778-241-2072 (Mobile)
peter@machinefreight.com
Auction Date & Time: lots start closing on Thurs. 08/07/2025 10:00 am (PST)
Location: 7505 134a St, Surrey, BC, V3W 7B3
Inspection: Wednesday August 6th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Sale held in conjunction with Joiner Sales Corp https://joinersales.com/
Featuring:
VERTICAL MACHINING CENTRE
2016 MAXCUT, MCV-35100/RH-35
• Axis Travel (XYZ): 100”x 33"x 27.95"
• RPM: 8000
• Cutting Hours: 6920
• Table Size: 112"x 30"
• CAT 40 - 24 ATC (Side mounted)
• Chip Conveyor
• Serial No: 1623321939
3rd AXIS VERTICAL MACHINING CENTRE
2012 Mori Seiki Duravertical 1035 ECO
• Axis Travel (XYZ): 40.7"x22"x20.1"
• RPM: 12,000
• Cutting Hours: 5970
• Table Size: 47.2"x 22"
• CAT 40- 30 ATC (Side mounted)
• High Pressure-Coolant
• Spindle Air Blast
• Serial No: 6103000137E
VERTICAL MACHINING CENTRE
2005 Mori Seiki Duracentre 5 (4th Axis Nikken
Table)
• Axis Travel (XYZ): 31.5"x20.1"x20.1"
• RPM: 12,000
• Cutting Hours: 19848
• Table Size: 43.4"x 23.6"
• CAT40 - 24 ATC (Side mounted)
• 4th Axis Rotary Table (NIKKEN CNC (Z) 180MM)
• Spindle Air Blast
• Serial No: DC005EF0228
HORIZONTAL MACHINING CENTRE
2000 Mori Seiki SH-403 (4th Axis with Two Pallets)
• Axis Travel (XYZ): 22”x20”x20"
• RPM: 12,000
• Cutting Hours: 16964
• Table Size: 15.7" X 15.7"
• CAT 40 - 40 ATC (Side mounted)
• 4th Axis with Two Pallets
• High Pressure-Coolant
• Serial No: 1167
VERTICAL MACHINING CENTRE
2005 HAAS VF-2D
• Axis Travel (XYZ): 30"x 16"x 20"
• RPM-10,000
• Cutting Hours: 2139
• Table Size: 36”x 14"
• CAT40 - 20 ATC (Umbrella Tyре)
• 4th Axis Ready
• Serial No: 11480
VERTICAL MACHINING CENTRE
1997 HASS VF-2B (with 4th Axis Wiring)
• Axis Travel (XYZ): 30"x 16"x 20"
• RPM-10,000
• Cutting Hours: 2139
• Table Size: 36”x 14"
• CAT40 - 20 ATC (Umbrella Tyре)
• 4th Axis Ready
• Serial No: 11480
HORIZONTAL MACHINING CENTRE
Hitachi Seiki HS 500 (Dual Pallet)
• Axis Travel (XYZ): 28.6"x 28.6"x 28.6"
• RPM -12,000 (New spindle 2021)
• Cutting Hours: 5990
• Table Size: 19.7"x 19.7"
• CAT40- 60 ATC (Side mounted)
• Dual Pallet
• Chip Conveyor
2015 CNC LASER CUTTING MACHINE
• Axis Travel (XYZ): 51"x100"х2"
• Table Size: 60"x136"
• Laser Power: 130W
• Stepper Motor Drives
• CW500 Industrial chiller system
• 3 Suction Pumps
• Serial No: 201509151
VERTICAL MILLING MACHINE
1996 Birmingham BPV-3949C
• 2-Axis DRO
• 3HP/220/440/3
SUPPORT EQUIPMENT
CNC tool holders, drills, King 6 x 48 belt, 9" disc sander, Dayton 1Z707R HD bench grinder, bar & flat bar etc. steel stock, steel shorts, steel tables, pallet racks, parts shelving, etc.
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Joiner Sales Corp., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee.
Payment is due by: 2PM Friday August 8th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, tiffany@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC (604) 533-6800
Willowbrook Branch
19888 Willowbrook Drive
Langley, BC V2Y 1K9
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C. V2T 6K7
Account #: 1228782
Transit #: 02880
Institution #: 003
Swift BIC Code: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.
REMOVAL INFO:
Removal hours 8AM - 4PM daily starting Thursday, July 31st, 2025 . Final Removal by 4PM Tues., Aug., 12th, 2025.
REMOVAL SERVICES
Buyers are required to provide their own rigging service.
RIGGERS (Auctioneer suggestions)
Belton Direct Rigging & Industrial Services
- Contact: Project Manager / Estimator
- 778-938-5585 (Office)
- 604-348-6143 (Mobile )
whollowink@bdrigging.com
Rolston Crane & Freight
Port Coquitlam, BC
(604) 468-9920
Eagle West Crane & Rigging
Abbotsford, BC
1-800-667-2215
Global Rigging & Transport
- 19399 96 Ave, Surrey, BC V4N 4C4
- Contact: Derek Jost
- 604-513-8468 (Office)
- 778-808-6728 (Mobile)
d.jost@globalrigging.com
Diehard Tools
- Contact: Edward Suderman
- 604-825-8531 (Mobile)
diehardtools@gmail.com
CRANE TRUCK COMPANIES
JK TRUCK & CRANE
Contact: Kevin Johnson
604-309-7000 / 604-824-1455
jkcranetruck@hotmail.com
TRUCKING SERVICE
Machine Freight
Contact: Peter Teichroeb
236-602-2878 (Office)
778-241-2072 (Mobile)
peter@machinefreight.com
Auction Date & Time: lots start closing on Thurs. 08/07/2025 10:00 am (PST)
Location: 7505 134a St, Surrey, BC, V3W 7B3
Inspection: Wednesday August 6th, 9AM - 4PM or By Appointment
18% Buyers Premium applies on all online purchases.
Sale held in conjunction with Joiner Sales Corp https://joinersales.com/
Featuring:
VERTICAL MACHINING CENTRE
2016 MAXCUT, MCV-35100/RH-35
• Axis Travel (XYZ): 100”x 33"x 27.95"
• RPM: 8000
• Cutting Hours: 6920
• Table Size: 112"x 30"
• CAT 40 - 24 ATC (Side mounted)
• Chip Conveyor
• Serial No: 1623321939
3rd AXIS VERTICAL MACHINING CENTRE
2012 Mori Seiki Duravertical 1035 ECO
• Axis Travel (XYZ): 40.7"x22"x20.1"
• RPM: 12,000
• Cutting Hours: 5970
• Table Size: 47.2"x 22"
• CAT 40- 30 ATC (Side mounted)
• High Pressure-Coolant
• Spindle Air Blast
• Serial No: 6103000137E
VERTICAL MACHINING CENTRE
2005 Mori Seiki Duracentre 5 (4th Axis Nikken
Table)
• Axis Travel (XYZ): 31.5"x20.1"x20.1"
• RPM: 12,000
• Cutting Hours: 19848
• Table Size: 43.4"x 23.6"
• CAT40 - 24 ATC (Side mounted)
• 4th Axis Rotary Table (NIKKEN CNC (Z) 180MM)
• Spindle Air Blast
• Serial No: DC005EF0228
HORIZONTAL MACHINING CENTRE
2000 Mori Seiki SH-403 (4th Axis with Two Pallets)
• Axis Travel (XYZ): 22”x20”x20"
• RPM: 12,000
• Cutting Hours: 16964
• Table Size: 15.7" X 15.7"
• CAT 40 - 40 ATC (Side mounted)
• 4th Axis with Two Pallets
• High Pressure-Coolant
• Serial No: 1167
VERTICAL MACHINING CENTRE
2005 HAAS VF-2D
• Axis Travel (XYZ): 30"x 16"x 20"
• RPM-10,000
• Cutting Hours: 2139
• Table Size: 36”x 14"
• CAT40 - 20 ATC (Umbrella Tyре)
• 4th Axis Ready
• Serial No: 11480
VERTICAL MACHINING CENTRE
1997 HASS VF-2B (with 4th Axis Wiring)
• Axis Travel (XYZ): 30"x 16"x 20"
• RPM-10,000
• Cutting Hours: 2139
• Table Size: 36”x 14"
• CAT40 - 20 ATC (Umbrella Tyре)
• 4th Axis Ready
• Serial No: 11480
HORIZONTAL MACHINING CENTRE
Hitachi Seiki HS 500 (Dual Pallet)
• Axis Travel (XYZ): 28.6"x 28.6"x 28.6"
• RPM -12,000 (New spindle 2021)
• Cutting Hours: 5990
• Table Size: 19.7"x 19.7"
• CAT40- 60 ATC (Side mounted)
• Dual Pallet
• Chip Conveyor
2015 CNC LASER CUTTING MACHINE
• Axis Travel (XYZ): 51"x100"х2"
• Table Size: 60"x136"
• Laser Power: 130W
• Stepper Motor Drives
• CW500 Industrial chiller system
• 3 Suction Pumps
• Serial No: 201509151
VERTICAL MILLING MACHINE
1996 Birmingham BPV-3949C
• 2-Axis DRO
• 3HP/220/440/3
SUPPORT EQUIPMENT
CNC tool holders, drills, King 6 x 48 belt, 9" disc sander, Dayton 1Z707R HD bench grinder, bar & flat bar etc. steel stock, steel shorts, steel tables, pallet racks, parts shelving, etc.
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Joiner Sales Corp., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee.
Payment is due by: 2PM Friday August 8th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, tiffany@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC (604) 533-6800
Willowbrook Branch
19888 Willowbrook Drive
Langley, BC V2Y 1K9
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C. V2T 6K7
Account #: 1228782
Transit #: 02880
Institution #: 003
Swift BIC Code: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Tags: Sander, Disc Sander