811
Lot
811
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
REMOVAL INFO:
Removal hours 8AM - 5PM starting Thursday, Aug. 7th, 2025 (Sunday by appointment only) Final Removal by 5PM Thurs., Aug. 14th, 2025.
RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.
RIGGERS & SHIPPERS OFFERING SERVICE TO BUYERS
Prime Movers Rigging & Industrial Service Inc.
Attn: Tye Simpson
Mobile: 587-894-4410
tsimpson@primemoversinc.ca
Doug Manuel
780-288-7770 - Cell
780-456-5611 - Office
rustysltd@gmail.com
SHIPPING OF SMALL PARCELS & LTL INTERNATIONALY
1-844-763-2020
info@totalshipworldwide.com
17550 Trans-Canada Hwy | kirkland
Quebec H9J 3A3
3 DAY AUCTION
Auction Date & Time: lots start closing on Wed. 08/06/2025 08:00 am (MST)
Location: 4820 Eleniak Road, Edmonton, AB, T6B 2S1
Preview Dates: Mon. to Fri., July 28th to Aug. 1st AND Tue., Aug. 5th, 8AM - 5PM each day.
18% Buyers Premium applies on all online purchases.
Sale held in conjunction with Joiner Sales Corp https://joinersales.com/
DAY 1 - EDMONTON LOCATION CONTENTS
CNC MACHINES
2015 MODERN V-30 MACHINING CENTER (UNUSED)
2014 MODERN "TMT" TTB-30C/1700 CNC LATHE (UNUSED)
2011 MODERN CHALLENGER V20/5 MACHINING CENTER (UNUSED)
2018 MICROCUT M-800 MACHINING CENTER (UNUSED)
MODERN TL42 CNC LATHE (UNUSED)
2016 PINACHO ST/225-65 x 1500 CNC LATHE (UNUSED)
2016 PINACHO SE/250-58 x 1500 CNC LATHE (UNUSED)
MODERN MM430 CNC MACHINING CENTER (UNUSED)
2001 PARAMOUNT PA 33 x 3000 CNC LATHE
MANUAL LATHES
MODERN LA430 X 1100 (UNUSED)
2024 MODERN C6246 x 1500 (UNUSED)
2023 MODERN C6241 X 1000 (UNUSED)
STANKO IM63
TOS SN71C X 3000
SUMMIT 19-4 X 80
VICTOR 1660
CHIEN YEH CY450G
SUMMIT 26-4X120 LATHE
WESTERN KWL2 LATHE
BORING MILLS
2007 SMTCL HORIZONTAL BORING MILL MHBM-110B
TOS W75 HORIZ BORING MILL
MILLING MACHINES
MODERN 3VM VERTICAL (UNUSED)
MODERN 935TV VERTICAL (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
MODERN 857II VERT. MILL
SAWS
(3) MODERN UE250S (UNUSED)
(2) MODERN KV-60 VERTICAL (UNUSED – 2 IN SHIPPING CRATE)
2023 MODERN UE916-A (9 X16) (UNUSED)
(3) 2024 MODERN UE-712-CSA 7 x 12 (UNUSED)
2022 MODERN CS-350 COLD SAW (UNUSED)
DRILLS
2006 STRANDS S25-U DRILL/MILL (UNUSED)
2023 MODERN ZN5050A GEAR HEAD COLUMN DRILL (UNUSED)
(2-2024/1-2019) MODERN CH-30 FLOOR DRILL PRESS (UNUSED)
MODERN RF35 RADIAL DRILL
FEIN KBM50 AUTO MAG DRILL
FEIN KBB-60 MAG DRILL
MODERN CH30 DRILL
(2) FEIN KBH-25 CORE DRILL
GRINDERS/SANDER
(2) MODERN DG-675 DRILL BIT GRINDER (UNUSED)
HEALD 261 ROTARY GRINDER
BOYER-SCHULTZ HR612 SURFACE GRINDER
KELLENBERGER 1785 CYLINDRICAL GRINDER
FEIN RADIUS GRINDING MODULE GX (UNUSED)
FEIN GX75 Belt Grinder (2HP, 230V, 2 Speed) (UNUSED)
DELTA COMBINATION BELT SANDER
FABRICATING
FABMASTER IW-66H IRONWORKER (UNUSED)
RK HFP-50T MWH HYDRAULIC SHOP PRESS (UNUSED)
GIR PIPE NOTCHING MODULE (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
WHITNEY #700SV-1A HYD. POWER PUNCH UNIT (UNUSED)
RK 30 TON HYDRAULIC PRESS
HOSSFELD #2 UNIVERSAL BENDER (UNUSED)
SHEET METAL
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
MODERN NU-4822 BOX & PAN BRAKE (UNUSED)
MODERN X-5016E POWER ROLL (UNUSED)
FEIN BLS-4.2 SHEET METAL SHEAR 8 GA. (UNUSED)
MODERN U-22 ROTARY MACHINE (UNUSED)
MODERN 1016- 3 in 1 MANUAL MACHINE (UNUSED)
SUPPORT EQUIPMENT
(3) QC-DR3 DIGITAL ROCKWELL HARDNESS TESTER (UNUSED)
GRAYMILLS 500A PARTS WASHER
CANTILEVER RACK, PALLET RACKING, PARTS SHELVING, LIFT SLINGS & RIGGING EQUIP., BANDING CART, TOOL CABINETS,
COMPRESSOR
2010 CHICAGO QRS 15 SCREW
$800,000 PARTS INVENTORY
MACHINE TOOLING, CONSUMABLES, CHUCKS, PRESS DIES, TRANSFORMERS, TOOL HOLDERS, MACHINE PARTS, PUNCHES, SENC 150 SCALES, ELEC. PARTS, BANDSAW BLADES, SHEAR BLADES, SANDING BELTS, ETC.
MOBILE EQUIPMENT
2021 DODGE RAM 1500 CLASSIC, 4 X 4, QUAD CAB, 3.2L GAS, 128,250KM
2010 DODGE RAM 1500 CREW CAB, 282,671KM
2018 DODGE DURANGO GT
FORKLIFT - HYSTER H100XL, 10,000# CAP., 159.5” LIFT, PROPANE, AIR TIRE
FORKLIFT – DAEWOO GC20S-2, 4000# CAP., 173” LIFT, PROPANE, CUSHION RUBBER
MORE SPECS & INFO TO COME SOON!
SUBJECT TO ADDITIONS & DELETIONS
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: ALL PAYMENTS MADE TO: JOINER SALES CORP
Full payment is required by THE DAY FOLLOWING THE AUCTION- BY 5PM by cash, debit, e-transfer, certified cheque, bank draft (accompanied by your bank receipt for authentic verification), bank wire or credit card [credit cards accepted on invoices NOT EXCEEDING $2000 on entire purchase]. If your invoice exceeds $2,000 we will not take any portion of the invoice on a credit card. You must pay the full amount by cash, debit, e-transfer, certified cheque, bank draft or bank wire/EFT.
(You must memo your paddle number or the first 4 digits of your invoice number on ALL transaction communications)
Removal deadline: 5PM, AUGUST 14TH, 2025
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, accounting@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
ROYAL BANK OF CANADA
Century Park Branch
11010-23 Avenue, NW
Edmonton, AB
(780) 448-6370
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C.
V2T 6K7
(604) 852-8711
Account #: 100-050-4
Transit #: 04089
Institution #: 003
Swift BIC Code: ROYCCAT2
IBAN#:003040891000504
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
E-TRANSFERS: accounting@joinersales.com
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
REMOVAL INFO:
Removal hours 8AM - 5PM starting Thursday, Aug. 7th, 2025 (Sunday by appointment only) Final Removal by 5PM Thurs., Aug. 14th, 2025.
RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.
RIGGERS & SHIPPERS OFFERING SERVICE TO BUYERS
Prime Movers Rigging & Industrial Service Inc.
Attn: Tye Simpson
Mobile: 587-894-4410
tsimpson@primemoversinc.ca
Doug Manuel
780-288-7770 - Cell
780-456-5611 - Office
rustysltd@gmail.com
SHIPPING OF SMALL PARCELS & LTL INTERNATIONALY
1-844-763-2020
info@totalshipworldwide.com
17550 Trans-Canada Hwy | kirkland
Quebec H9J 3A3
3 DAY AUCTION
Auction Date & Time: lots start closing on Wed. 08/06/2025 08:00 am (MST)
Location: 4820 Eleniak Road, Edmonton, AB, T6B 2S1
Preview Dates: Mon. to Fri., July 28th to Aug. 1st AND Tue., Aug. 5th, 8AM - 5PM each day.
18% Buyers Premium applies on all online purchases.
Sale held in conjunction with Joiner Sales Corp https://joinersales.com/
DAY 1 - EDMONTON LOCATION CONTENTS
CNC MACHINES
2015 MODERN V-30 MACHINING CENTER (UNUSED)
2014 MODERN "TMT" TTB-30C/1700 CNC LATHE (UNUSED)
2011 MODERN CHALLENGER V20/5 MACHINING CENTER (UNUSED)
2018 MICROCUT M-800 MACHINING CENTER (UNUSED)
MODERN TL42 CNC LATHE (UNUSED)
2016 PINACHO ST/225-65 x 1500 CNC LATHE (UNUSED)
2016 PINACHO SE/250-58 x 1500 CNC LATHE (UNUSED)
MODERN MM430 CNC MACHINING CENTER (UNUSED)
2001 PARAMOUNT PA 33 x 3000 CNC LATHE
MANUAL LATHES
MODERN LA430 X 1100 (UNUSED)
2024 MODERN C6246 x 1500 (UNUSED)
2023 MODERN C6241 X 1000 (UNUSED)
STANKO IM63
TOS SN71C X 3000
SUMMIT 19-4 X 80
VICTOR 1660
CHIEN YEH CY450G
SUMMIT 26-4X120 LATHE
WESTERN KWL2 LATHE
BORING MILLS
2007 SMTCL HORIZONTAL BORING MILL MHBM-110B
TOS W75 HORIZ BORING MILL
MILLING MACHINES
MODERN 3VM VERTICAL (UNUSED)
MODERN 935TV VERTICAL (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
MODERN 857II VERT. MILL
SAWS
(3) MODERN UE250S (UNUSED)
(2) MODERN KV-60 VERTICAL (UNUSED – 2 IN SHIPPING CRATE)
2023 MODERN UE916-A (9 X16) (UNUSED)
(3) 2024 MODERN UE-712-CSA 7 x 12 (UNUSED)
2022 MODERN CS-350 COLD SAW (UNUSED)
DRILLS
2006 STRANDS S25-U DRILL/MILL (UNUSED)
2023 MODERN ZN5050A GEAR HEAD COLUMN DRILL (UNUSED)
(2-2024/1-2019) MODERN CH-30 FLOOR DRILL PRESS (UNUSED)
MODERN RF35 RADIAL DRILL
FEIN KBM50 AUTO MAG DRILL
FEIN KBB-60 MAG DRILL
MODERN CH30 DRILL
(2) FEIN KBH-25 CORE DRILL
GRINDERS/SANDER
(2) MODERN DG-675 DRILL BIT GRINDER (UNUSED)
HEALD 261 ROTARY GRINDER
BOYER-SCHULTZ HR612 SURFACE GRINDER
KELLENBERGER 1785 CYLINDRICAL GRINDER
FEIN RADIUS GRINDING MODULE GX (UNUSED)
FEIN GX75 Belt Grinder (2HP, 230V, 2 Speed) (UNUSED)
DELTA COMBINATION BELT SANDER
FABRICATING
FABMASTER IW-66H IRONWORKER (UNUSED)
RK HFP-50T MWH HYDRAULIC SHOP PRESS (UNUSED)
GIR PIPE NOTCHING MODULE (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
WHITNEY #700SV-1A HYD. POWER PUNCH UNIT (UNUSED)
RK 30 TON HYDRAULIC PRESS
HOSSFELD #2 UNIVERSAL BENDER (UNUSED)
SHEET METAL
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
MODERN NU-4822 BOX & PAN BRAKE (UNUSED)
MODERN X-5016E POWER ROLL (UNUSED)
FEIN BLS-4.2 SHEET METAL SHEAR 8 GA. (UNUSED)
MODERN U-22 ROTARY MACHINE (UNUSED)
MODERN 1016- 3 in 1 MANUAL MACHINE (UNUSED)
SUPPORT EQUIPMENT
(3) QC-DR3 DIGITAL ROCKWELL HARDNESS TESTER (UNUSED)
GRAYMILLS 500A PARTS WASHER
CANTILEVER RACK, PALLET RACKING, PARTS SHELVING, LIFT SLINGS & RIGGING EQUIP., BANDING CART, TOOL CABINETS,
COMPRESSOR
2010 CHICAGO QRS 15 SCREW
$800,000 PARTS INVENTORY
MACHINE TOOLING, CONSUMABLES, CHUCKS, PRESS DIES, TRANSFORMERS, TOOL HOLDERS, MACHINE PARTS, PUNCHES, SENC 150 SCALES, ELEC. PARTS, BANDSAW BLADES, SHEAR BLADES, SANDING BELTS, ETC.
MOBILE EQUIPMENT
2021 DODGE RAM 1500 CLASSIC, 4 X 4, QUAD CAB, 3.2L GAS, 128,250KM
2010 DODGE RAM 1500 CREW CAB, 282,671KM
2018 DODGE DURANGO GT
FORKLIFT - HYSTER H100XL, 10,000# CAP., 159.5” LIFT, PROPANE, AIR TIRE
FORKLIFT – DAEWOO GC20S-2, 4000# CAP., 173” LIFT, PROPANE, CUSHION RUBBER
MORE SPECS & INFO TO COME SOON!
SUBJECT TO ADDITIONS & DELETIONS
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: ALL PAYMENTS MADE TO: JOINER SALES CORP
Full payment is required by THE DAY FOLLOWING THE AUCTION- BY 5PM by cash, debit, e-transfer, certified cheque, bank draft (accompanied by your bank receipt for authentic verification), bank wire or credit card [credit cards accepted on invoices NOT EXCEEDING $2000 on entire purchase]. If your invoice exceeds $2,000 we will not take any portion of the invoice on a credit card. You must pay the full amount by cash, debit, e-transfer, certified cheque, bank draft or bank wire/EFT.
(You must memo your paddle number or the first 4 digits of your invoice number on ALL transaction communications)
Removal deadline: 5PM, AUGUST 14TH, 2025
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, accounting@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
ROYAL BANK OF CANADA
Century Park Branch
11010-23 Avenue, NW
Edmonton, AB
(780) 448-6370
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C.
V2T 6K7
(604) 852-8711
Account #: 100-050-4
Transit #: 04089
Institution #: 003
Swift BIC Code: ROYCCAT2
IBAN#:003040891000504
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
E-TRANSFERS: accounting@joinersales.com
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.