557
Lot
557
You are about to place a bid of CAD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (905-669-8893)
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
REMOVAL INFO:
Removal hours 8AM - 4PM starting Thursday, Aug. 7th, 2025. Closed Sunday. Final Removal by 4PM Thurs., Aug. 14th, 2025.
RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.
RIGGERS & SHIPPERS OFFERING SERVICE TO BUYERS
Prime Movers Rigging & Industrial Service Inc.
Attn: Tye Simpson
Mobile: 587-894-4410
tsimpson@primemoversinc.ca
Doug Manuel
780-288-7770 - Cell
780-456-5611 - Office
rustysltd@gmail.com
SHIPPING OF SMALL PARCELS & LTL INTERNATIONALY
1-844-763-2020
info@totalshipworldwide.com
17550 Trans-Canada Hwy | kirkland
Quebec H9J 3A3
3 DAY AUCTION
Auction Date & Time: lots start closing on Wed. 08/06/2025 08:00 am (MST)
Location: 4820 Eleniak Road, Edmonton, AB, T6B 2S1
Inspection: Tuesday August 5th, 9AM - 5PM or By Appointment
18% Buyers Premium applies on all online purchases.
Sale held in conjunction with Joiner Sales Corp https://joinersales.com/
DAY 1 - EDMONTON LOCATION CONTENTS
CNC MACHINES
2015 MODERN V-30 MACHINING CENTER (UNUSED)
2014 MODERN "TMT" TTB-30C/1700 CNC LATHE (UNUSED)
2011 MODERN CHALLENGER V20/5 MACHINING CENTER (UNUSED)
2018 MICROCUT M-800 MACHINING CENTER (UNUSED)
MODERN TL42 CNC LATHE (UNUSED)
2016 PINACHO ST/225-65 x 1500 CNC LATHE (UNUSED)
2016 PINACHO SE/250-58 x 1500 CNC LATHE (UNUSED)
MODERN MM430 CNC MACHINING CENTER (UNUSED)
2001 PARAMOUNT PA 33 x 3000 CNC LATHE
MANUAL LATHES
MODERN LA430 X 1100 (UNUSED)
2024 MODERN C6246 x 1500 (UNUSED)
2023 MODERN C6241 X 1000 (UNUSED)
STANKO IM63
TOS SN71C X 3000
SUMMIT 19-4 X 80
VICTOR 1660
CHIEN YEH CY450G
SUMMIT 26-4X120 LATHE
WESTERN KWL2 LATHE
BORING MILLS
2007 SMTCL HORIZONTAL BORING MILL MHBM-110B
TOS W75 HORIZ BORING MILL
MILLING MACHINES
MODERN 3VM VERTICAL (UNUSED)
MODERN 935TV VERTICAL (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
MODERN 857II VERT. MILL
SAWS
(3) MODERN UE250S (UNUSED)
(2) MODERN KV-60 VERTICAL (UNUSED – 2 IN SHIPPING CRATE)
2023 MODERN UE916-A (9 X16) (UNUSED)
(3) 2024 MODERN UE-712-CSA 7 x 12 (UNUSED)
2022 MODERN CS-350 COLD SAW (UNUSED)
DRILLS
2006 STRANDS S25-U DRILL/MILL (UNUSED)
2023 MODERN ZN5050A GEAR HEAD COLUMN DRILL (UNUSED)
(2-2024/1-2019) MODERN CH-30 FLOOR DRILL PRESS (UNUSED)
MODERN RF35 RADIAL DRILL
FEIN KBM50 AUTO MAG DRILL
FEIN KBB-60 MAG DRILL
MODERN CH30 DRILL
(2) FEIN KBH-25 CORE DRILL
GRINDERS/SANDER
(2) MODERN DG-675 DRILL BIT GRINDER (UNUSED)
HEALD 261 ROTARY GRINDER
BOYER-SCHULTZ HR612 SURFACE GRINDER
KELLENBERGER 1785 CYLINDRICAL GRINDER
FEIN RADIUS GRINDING MODULE GX (UNUSED)
FEIN GX75 Belt Grinder (2HP, 230V, 2 Speed) (UNUSED)
DELTA COMBINATION BELT SANDER
FABRICATING
FABMASTER IW-66H IRONWORKER (UNUSED)
RK HFP-50T MWH HYDRAULIC SHOP PRESS (UNUSED)
GIR PIPE NOTCHING MODULE (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
WHITNEY #700SV-1A HYD. POWER PUNCH UNIT (UNUSED)
RK 30 TON HYDRAULIC PRESS
HOSSFELD #2 UNIVERSAL BENDER (UNUSED)
SHEET METAL
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
MODERN NU-4822 BOX & PAN BRAKE (UNUSED)
MODERN X-5016E POWER ROLL (UNUSED)
FEIN BLS-4.2 SHEET METAL SHEAR 8 GA. (UNUSED)
MODERN U-22 ROTARY MACHINE (UNUSED)
MODERN 1016- 3 in 1 MANUAL MACHINE (UNUSED)
SUPPORT EQUIPMENT
(3) QC-DR3 DIGITAL ROCKWELL HARDNESS TESTER (UNUSED)
GRAYMILLS 500A PARTS WASHER
CANTILEVER RACK, PALLET RACKING, PARTS SHELVING, LIFT SLINGS & RIGGING EQUIP., BANDING CART, TOOL CABINETS,
COMPRESSOR
2010 CHICAGO QRS 15 SCREW
$800,000 PARTS INVENTORY
MACHINE TOOLING, CONSUMABLES, CHUCKS, PRESS DIES, TRANSFORMERS, TOOL HOLDERS, MACHINE PARTS, PUNCHES, SENC 150 SCALES, ELEC. PARTS, BANDSAW BLADES, SHEAR BLADES, SANDING BELTS, ETC.
MOBILE EQUIPMENT
2021 DODGE RAM 1500 CLASSIC, 4 X 4, QUAD CAB, 3.2L GAS, 128,250KM
2010 DODGE RAM 1500 CREW CAB, 282,671KM
2018 DODGE DURANGO GT
FORKLIFT - HYSTER H100XL, 10,000# CAP., 159.5” LIFT, PROPANE, AIR TIRE
FORKLIFT – DAEWOO GC20S-2, 4000# CAP., 173” LIFT, PROPANE, CUSHION RUBBER
MORE SPECS & INFO TO COME SOON!
SUBJECT TO ADDITIONS & DELETIONS
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Joiner Sales Corp., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee.
Payment is due by: 2PM Thursday August 7th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, tiffany@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC (604) 533-6800
Willowbrook Branch
19888 Willowbrook Drive
Langley, BC V2Y 1K9
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C. V2T 6K7
Account #: 1228782
Transit #: 02880
Institution #: 003
Swift BIC Code: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
REMOVAL INFO:
Removal hours 8AM - 4PM starting Thursday, Aug. 7th, 2025. Closed Sunday. Final Removal by 4PM Thurs., Aug. 14th, 2025.
RIGGING / REMOVAL IS THE RESPONSIBILITY OF THE BIDDER. All removal activity must be in accordance with safety standards.
RIGGERS & SHIPPERS OFFERING SERVICE TO BUYERS
Prime Movers Rigging & Industrial Service Inc.
Attn: Tye Simpson
Mobile: 587-894-4410
tsimpson@primemoversinc.ca
Doug Manuel
780-288-7770 - Cell
780-456-5611 - Office
rustysltd@gmail.com
SHIPPING OF SMALL PARCELS & LTL INTERNATIONALY
1-844-763-2020
info@totalshipworldwide.com
17550 Trans-Canada Hwy | kirkland
Quebec H9J 3A3
3 DAY AUCTION
Auction Date & Time: lots start closing on Wed. 08/06/2025 08:00 am (MST)
Location: 4820 Eleniak Road, Edmonton, AB, T6B 2S1
Inspection: Tuesday August 5th, 9AM - 5PM or By Appointment
18% Buyers Premium applies on all online purchases.
Sale held in conjunction with Joiner Sales Corp https://joinersales.com/
DAY 1 - EDMONTON LOCATION CONTENTS
CNC MACHINES
2015 MODERN V-30 MACHINING CENTER (UNUSED)
2014 MODERN "TMT" TTB-30C/1700 CNC LATHE (UNUSED)
2011 MODERN CHALLENGER V20/5 MACHINING CENTER (UNUSED)
2018 MICROCUT M-800 MACHINING CENTER (UNUSED)
MODERN TL42 CNC LATHE (UNUSED)
2016 PINACHO ST/225-65 x 1500 CNC LATHE (UNUSED)
2016 PINACHO SE/250-58 x 1500 CNC LATHE (UNUSED)
MODERN MM430 CNC MACHINING CENTER (UNUSED)
2001 PARAMOUNT PA 33 x 3000 CNC LATHE
MANUAL LATHES
MODERN LA430 X 1100 (UNUSED)
2024 MODERN C6246 x 1500 (UNUSED)
2023 MODERN C6241 X 1000 (UNUSED)
STANKO IM63
TOS SN71C X 3000
SUMMIT 19-4 X 80
VICTOR 1660
CHIEN YEH CY450G
SUMMIT 26-4X120 LATHE
WESTERN KWL2 LATHE
BORING MILLS
2007 SMTCL HORIZONTAL BORING MILL MHBM-110B
TOS W75 HORIZ BORING MILL
MILLING MACHINES
MODERN 3VM VERTICAL (UNUSED)
MODERN 935TV VERTICAL (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
MODERN 857II VERT. MILL
SAWS
(3) MODERN UE250S (UNUSED)
(2) MODERN KV-60 VERTICAL (UNUSED – 2 IN SHIPPING CRATE)
2023 MODERN UE916-A (9 X16) (UNUSED)
(3) 2024 MODERN UE-712-CSA 7 x 12 (UNUSED)
2022 MODERN CS-350 COLD SAW (UNUSED)
DRILLS
2006 STRANDS S25-U DRILL/MILL (UNUSED)
2023 MODERN ZN5050A GEAR HEAD COLUMN DRILL (UNUSED)
(2-2024/1-2019) MODERN CH-30 FLOOR DRILL PRESS (UNUSED)
MODERN RF35 RADIAL DRILL
FEIN KBM50 AUTO MAG DRILL
FEIN KBB-60 MAG DRILL
MODERN CH30 DRILL
(2) FEIN KBH-25 CORE DRILL
GRINDERS/SANDER
(2) MODERN DG-675 DRILL BIT GRINDER (UNUSED)
HEALD 261 ROTARY GRINDER
BOYER-SCHULTZ HR612 SURFACE GRINDER
KELLENBERGER 1785 CYLINDRICAL GRINDER
FEIN RADIUS GRINDING MODULE GX (UNUSED)
FEIN GX75 Belt Grinder (2HP, 230V, 2 Speed) (UNUSED)
DELTA COMBINATION BELT SANDER
FABRICATING
FABMASTER IW-66H IRONWORKER (UNUSED)
RK HFP-50T MWH HYDRAULIC SHOP PRESS (UNUSED)
GIR PIPE NOTCHING MODULE (UNUSED)
STANKO 6R82SH UNIV MILLING MACHINE
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
WHITNEY #700SV-1A HYD. POWER PUNCH UNIT (UNUSED)
RK 30 TON HYDRAULIC PRESS
HOSSFELD #2 UNIVERSAL BENDER (UNUSED)
SHEET METAL
2023 MODERN / LINMAC H-5210 HYDRAULIC SHEAR 52" x 10 GA. (UNUSED)
2021 MODERN / LINMAC O-5216 52" X1.6MM (16GA) FOOT SHEAR (UNUSED)
MODERN NU-4822 BOX & PAN BRAKE (UNUSED)
MODERN X-5016E POWER ROLL (UNUSED)
FEIN BLS-4.2 SHEET METAL SHEAR 8 GA. (UNUSED)
MODERN U-22 ROTARY MACHINE (UNUSED)
MODERN 1016- 3 in 1 MANUAL MACHINE (UNUSED)
SUPPORT EQUIPMENT
(3) QC-DR3 DIGITAL ROCKWELL HARDNESS TESTER (UNUSED)
GRAYMILLS 500A PARTS WASHER
CANTILEVER RACK, PALLET RACKING, PARTS SHELVING, LIFT SLINGS & RIGGING EQUIP., BANDING CART, TOOL CABINETS,
COMPRESSOR
2010 CHICAGO QRS 15 SCREW
$800,000 PARTS INVENTORY
MACHINE TOOLING, CONSUMABLES, CHUCKS, PRESS DIES, TRANSFORMERS, TOOL HOLDERS, MACHINE PARTS, PUNCHES, SENC 150 SCALES, ELEC. PARTS, BANDSAW BLADES, SHEAR BLADES, SANDING BELTS, ETC.
MOBILE EQUIPMENT
2021 DODGE RAM 1500 CLASSIC, 4 X 4, QUAD CAB, 3.2L GAS, 128,250KM
2010 DODGE RAM 1500 CREW CAB, 282,671KM
2018 DODGE DURANGO GT
FORKLIFT - HYSTER H100XL, 10,000# CAP., 159.5” LIFT, PROPANE, AIR TIRE
FORKLIFT – DAEWOO GC20S-2, 4000# CAP., 173” LIFT, PROPANE, CUSHION RUBBER
MORE SPECS & INFO TO COME SOON!
SUBJECT TO ADDITIONS & DELETIONS
=================================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Joiner Sales Corp., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee.
Payment is due by: 2PM Thursday August 7th, 2025.
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.
Removal deadline: TBD
Site Supervisor: KEVIN JOINER 604-308-8040
Accounting: Tiffany 604-308-2762, tiffany@joinersales.com
Banking Information (Wire Transfers):
WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC (604) 533-6800
Willowbrook Branch
19888 Willowbrook Drive
Langley, BC V2Y 1K9
BENEFICIARY NAME:
JOINER SALES CORP
103A-31120 PEARDONVILLE RD.
ABBOTSFORD, B.C. V2T 6K7
Account #: 1228782
Transit #: 02880
Institution #: 003
Swift BIC Code: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ROUTING/ABA#: 021000021
Terms and Conditions of Sale for Infinity Asset Solutions
By participating in the online auction, all individuals and/or companies agree to be bound by the following terms and conditions, which may be amended by the Auctioneer at any time during the auction. All bidders are required to digitally accept these terms and conditions prior to placing any bids.
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
Tags: Work light