Auction closed
Hillside, New Jersey
Timed auction

Auction dates

  • Ended Aug 01, 2023 1:22pm ET (6:22pm BST)

Auction details

Currency: USD
Buyer's premium: 18.00%
Sales tax: 6.625%

Venue address

475 Bloy St. Hillside, New Jersey 07205 United States

Auction house

Add to favorites Ask a question phone_in_talk 412-521-5751
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
79 item(s)
  • List
  • Grid
  • 79 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

2013 Topos Mondial Corp. Dough Mixer, Job #: 4932, with Allen-Bradley Plus 1000 Display, with Double Door S/S Control Panel, with Allen-Bradley Co...

VMI Dual S/S Dough Hook Mixer, Type: SPI700DAVI, S/N 79248, with Aprox. 39" Dia., with S/S Portable Mixing Bowl (LOCATED IN HILLSIDE, N.J.)(RIGGIN...

Kemper S/S Dough Mixer, Type: PRO 150 ASPS, Date-Code: J3A-98141/629027, 480 Volts, 3 Phase, with Aprox. (2) 47-1/2" Dia. S/S Portable Mixing Bowl...

(2) S/S Portable Mixing Bowl, Aprox. 39" Dia. x 18" Deep, Mounted on Portable Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMEN...

Kinetic Equipment Co. S/S Column Lift, Aprox. 102" H, with Motor, with Wall Mounted Square D Safety Switch (LOCATED IN HILLSIDE, N.J.)(RIGGING, LO...

Dual Column Lift, with Motors & Drives, Overall Height of Columns from Floor to Top of Columns: Aprox. 15 ft. (PREVIOUSLY USED FOR VMI MIXER) (LOC...

S/S Cyclone, with ElectroStar Shop-Vac, with S/S Hose Reel, Both Units Wall Mounted (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMEN...

(4) Portable Plastic Dumpsters, Overall Dims.: Aprox. 60" L x 26" W x 50" H, with Portable Frame & Fork Pockets (LOCATED IN HILLSIDE, N.J.)(RIGGIN...

(3) Portable Plastic Dumpsters, Overall Dims.: Aprox. 60" L x 26" W x 50" H, with Portable Frame & Fork Pockets (LOCATED IN HILLSIDE, N.J.)(RIGGIN...

(5) Plastic Waste Bins, Internal Dims.: Aprox. 22-1/2" Deep x 18-1/2" Dia., Mounted on Skates (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE...

Urschel S/S Slicer, M/N OV-51, S/N 79081, with 2 hp S/S Clad Motor, Mounted on S/S Portable Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & ...

FoodTools Sheet Cake Slicer, with Aprox. 18" W Conveyor Belt, with Motor, with Aprox. 2-1/2" H Opening, Mounted on S/S Portable Frame (LOCATED IN ...

2013 FoodTools Press, M/N TC-1, S/N 4678, Max. Operating Press: 100/6.9, Mounted on S/S Portable Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADIN...

Lutech Co. Inc. Straight Section of Conveyor, with (3) Aprox. 6" W Plastic Interlock Belt, with Baldor 5 hp Motor, with DART Controller, Overall L...

2016 EAC Slicer, M/N GR25/A, S/N 127188, 230 Volts, 3 Phase (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $300.00 USD) .....

2016 Quantum Technical Services Inc. Cheese Applicator, M/N T2000-16, S/N T20016001, 220 Volts, 1 Phase, Mounted on Portable Frame, with Aprox. 18...

Kasen 3-Tier Shaker, M/N K24-1-S8, Job. No.: K-82543, with 1/2 hp Motor, 115 Volts, 1 Phase, with S/S Tiers with Baldor Controller (LOCATED IN HIL...

GuardAir Shop Vac, Mounted on Portable Frame (NOTE: Missing Hose & Attachments) (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FE...

(3) Pedestol Fans (NOTE: 1-Fan Missing Front Guard) (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $25.00 USD) ...[more]

Arty Pac VFFS, M/N Arty 30V, S/N 2350502, 220 Volts, with S/S Arty Pac Incline Discharge Conveyor, Model L Exit Conveyor, S/N 7890213, Overall Dim...

Yamato 14-Bucket S/S Scale System, Model ADW-514, S/N WC140111, Max. Speed 120 P Per Minute, Weight Range 4G - 500 G, 230 V, with S/S Platform, Ap...

Arty Pac S/S Incline Z-Convyeor Infeed, Model Z, S/N 8300714, Overall Dims.: Aprox. 90" L x 48" W x 172" H, 17" W Conveyor Belt, Aprox. 12" Betwee...

Lock Flow-Thru Metal Detector, Aprox. 6-1/2" Dia. Opening, with Digital Read Out Mounted on S/S Panel (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING...

Mecano Industries Cooling Conveyor System, with (6) S/S Fans and Dual Lane 8" Conveyor (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGE...

S/S Tumbler, Dims. of Tumbler: Aprox. 95" L x 30" Dia., Mounted on S/S Portable Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEM...

S/S Seasoning Doser, S/S Hopper Dims: Aprox. 20" L x 20" W x 14" D with S/S Augers, 95" Discharge, Mounted on Portable S/S Frame (LOCATED IN HILLS...

S/S Accumulation Conveyor, with Aprox. 48" Dia. Table Top, with Allen-Bradley VFD, with Motor & Drive, Mounted on S/S Frame (LOCATED IN HILLSIDE, ...

BULK BID: VFFS & SCALE SYSTEM, INCLUDES LOTS 24-31; Here is a Video of System: https://youtu.be/hn52zuNr3-A (LOCATED IN HILLSIDE, N.J.)(RIGGING, L...

S/S Crossover Platform, Overall Dims.: Aprox. 45" L x 31" W x 85" H, Opening Height: Aprox. 50-1/2" H (Floor to Platform) (LOCATED IN HILLSIDE, N....

Straight Section of Conveyor, Aprox. 168" L, with Aprox. 24" W Plastic Interlock Belt, Mounted on S/S Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, L...

Tromp Bakery Equipment Pre-Roll & Pre-Duster Line, Includes S/S Chunker, with S/S Infeed Funnel, Rollers with S/S Rolls, (4) Pre-Dusters, Allen-Br...

5-Tier Proofer System, with Modular Room, Overall Dims. of Room: Aprox. 95 ft. L x 11 ft. W x 8 ft. H, with (3) Lillnord Circulators, with (2) Man...

Tromp Bakery Equiment Forming Line, with Aprox. 36" W Belt with Duster & S/S Mesh Discharge Belt, with Allen-Bradley PanelView Plus 1000 Touchpad ...

(6) Forming Rolls of Tromp Line, Includes Round & Oval Pita Rolls, Includes Aluminum Rack (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MAN...

(7) Forming Rolls for Tromp Line, Includes Round, Square, & Oval Pita Rolls, Includes Aluminum Rack (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, ...

Rademaker Den Boer Aermoflex S/S Oven, with Allen-Bradley PanelView 1000 Touchpad Display, with Mesh Conveyor, Aprox. 31-1/2" W Belt, Aprox. 2" H ...

S/S 180 Degree Turn Conveyor, with Aprox. 41" W Belt, with Marathon 3/4 hp Motor (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT F...

20-Tier Cooling Spiral, Top to Bottom Flow of Product, with Aprox. 36" W S/S Mesh Belt, with S/S Uprights & Framing (LOCATED IN HILLSIDE, N.J.)(RI...

Suspended Product Conveyor, with Aprox. 42" W Plastic Interlock Belt, with 1-Section of 180 Degree Turn, with Right 90 Degree Turn (LOCATED IN HIL...

Butcher Block Table Top, Overall Dims.: Aprox. 8 ft. L x 36.5" W x 34" H (Table Top to Floor) (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE...

Butcher Block Table Top, Overall Dims.: Aprox. 8 ft. L x 36.5" W x 34" H (Table Top to Floor) (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE...

(2) Aluminum Double Racks & (1) Rack with Plastic Trays (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $50.00 USD) ...[mor...

H. Babb Co. Inc. S/S Oven, with Aprox. 37" W Conveyor Belt, Product Opening: Aprox. 7" H (Top of Opening to Top of Conveyor), Overall Length: Apro...

Shanklin Shrink Wrap Tunnel, M/N T-72, S/N T-93108, 460 Volts, 3 Phase, with Aprox. 21" W x 8" H, with Aprox. 14-1/2" W Belt (LOCATED IN HILLSIDE,...

2006 Kallfass Wrapper, Type Universa 500 Servo, S/N K10.06.355, 480 Volts, 3 Phase (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT...

S/S Dual Roll Extruder with Aprox. 12" Dia. S/S Rolls, Mounted on S/S Portable Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEME...

Central Pneumatic Sand Blast Unit (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $50.00 USD) ...[more]

S/S Oven, Aprox. 34" W Belt, with Infeed Conveyor (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $850.00 USD) ...[more]

Thiele Continuous Motion Cartoner, M/N Series 60, S/N 65081, 480 Volts, 3 Phase, with Nordson ProBlue7 Glue Pot (LOCATED IN HILLSIDE, N.J.)(RIGGIN...

2012 Tiefenthaler S/S Topper Applicator, M/N T-1262, S/N 34644, Mounted on S/S Portable Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE...

Foamer, with Plastic Reservoir with Hose & Spray Nozzel (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $50.00 USD) ...[mor...

NSS Walk-Behind Electric Floor Scrubber  (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $150.00 USD) ...[more]

S/S Metal Detector, with Aprox. 17-1/2" W x 6-1/2" H, with Aprox. 12-1/2" W Conveyor Belt Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SI...

Miller Welder, Mounted on Portable Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $50.00 USD) ...[more]

180 Degree of Conveyor, Aprox. 29" W Conveyor Roll (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $200.00 USD) ...[more]

S/S Salter, with S/S Infeed Funnel, with Motor, Mounted on S/S Frame (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $200.00...

Shanklin Straight Section of Conveyor, M/N C0122B, S/N F9581, Mounted on Mild Steel Legs (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANA...

3M Top & Bottom Case Sealer, with Tape Heads, with Spare Tape Head & Box of Tape (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT F...

Straight Section of Conveyor, Aprox. 117" L, with Aprox. 40" W Belt (LOCATED IN HILLSIDE, N.J.)(RIGGING, LOADING, & SITE MANAGEMENT FEE:  $300.00 ...

(4) Sections of Roller Conveyor, Aprox. 10 ft. L x 15.5" W, Mounted on Mild Steel Frame (LOCATED IN HILLSIDE, N.J.) (RIGGING, LOADING, & SITE MANA...

Loading...Loading...
  • 79 item(s)
    /page

Recently Viewed Lots