GH 5 hp Positive Displacement Pump, M/N GHPP-632,S/N 91-10-4692A, with Baldor Motor, with S/S Head with S/S Impelllers, Mounted on S/S Frame (LOCA...

(3) Tanker Platforms, Mounted on Hinge Frame(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $200.00 USD) ...[more]

(3) Tanker Platforms, Mounted on Hinge Frame(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $250.00 USD) ...[more]

S/S CIP Attachment for Truck Trailer Clean Out(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD)

(2) Sanitary Coupler Transfer Hoses (LOCATED INMANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD)

5 hp Centrifugal Pump, with Baldor 1780 RPMMotor, 208-230/460 Volts, 3 Phase (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $150...

14-Valve Tri-Clover S/S Air Valve Cluster,Mounted on S/S Frame (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $200.00 USD) ...[m...

S/S Rack with Assorted S/S Fittings, with TankCIP Door S/S Single Bowl Sink (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $100...

S/S Control Panel, with Allen-Bradley PLC OtherComponents (NOTE: Missing Some Components—See Photos) (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SI...

(4) S/S Flow Diversion Clamp Type Panels, 1-(6)Port; 1-(9) Port; 1- (5) Port; 1- (6) Port; Mounted on S/S Legs (LOCATED IN MANTECA, CA)(RIGGING, L...

Stanitary Couplers Transfer Hose, Aprox. 3” ClampType Ends (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD)

Sudmo S/S Separator, Type: MKS280UPG-6011, Nr.37159, S/S Balance Tank, with Associated Control Panels (LOCATED IN MANTECA, CA)(RIGGING, LOADING, ...

WestFalia/Separators Inc. S/S Separator, M/NSAMM12006, S/N 1632332, Speed of Bowl 4500 RMP, Clarification 40,000, Standardization 40,000, with Ass...

HTST System, with Alpha Laval 3-Section PlateHeat Exchanger, M/N R51, S/N 19401, Includes (2) 5 hp Centrifugal Pump, with 5-Pass S/S Holding Tubes...

S/S RO System, with (12) 8” Dia. Tubes, (8)Pumps, with S/S Balance Tank, with Associated Valving Piping, Overall Dims. of Skid: 6.4 ft W x 16 ft. ...

UF S/S Skid, (43) Tubes, Aprox. 4” Dia, Includes(7) Pumps, with Associated Heat Exchanger, Overall Dims. of Skid: 14 ft. L x 8 ft. W x 112” H, Mou...

UF Balance Tank Skid, with Aprox. 500 Gal. S/SSingle Wall Tank, Dims.: Aprox. 6 ft. Tall x 4 ft. W, with Centrifugal Pump, Associated Valving Pip...

UF S/S Skid, (40) Tubes, Aprox. 4” Dia, Includes(7) Pumps, with Associated Heat Exchanger, Overall Dims. of Skid: 14 ft. L x 8 ft. W x 112” H, Mou...

Budgit 2-Ton Hoist, with Cross Beam (LOCATED INMANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $250.00 USD) ...[more]

Mueller 40,000 Gal. S/S Silo, with S/S Alcove,with Horizontal Agitation (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $5,00.00 ...

C.E. Howard Corporation 30,000 Gal. S/S Silo, M/N13455-A, S/N 10597, with S/S Alcove (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FE...

Aprox. 6,000 Gal. S/S Horizontal Tank, with DualCIP Spray Balls, with Vertical S/S Agitation, Tank Internal Dims.: Aprox. 14 ft. L x 8 ft. Dia., w...

Assorted S/S Flow Diversion Stations, Mounted onS/S Legs (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $500.00 USD)

(2) 5 hp Centrifugal Pumps, 1-with Baldor Motor(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $150.00 USD)

15 hp Centrifugal Pump, with Baldor Motor,208-230/460 Volts, 3 Phase (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $150.00 USD)

3-Tank CIP System, with Centrifugal Pump,Internal Dims. of Tank: Aprox. 58” L x 32” Dia., Mounted on S/S Skid (LOCATED IN MANTECA, CA)(RIGGING, LO...

Sani-Fab Jacketed S/S Tank, Tank Dims.: Aprox. 7ft. Tall x 80” Dia., Cone Bottom, Mounted on S/S Frame (LOCATED IN MANTECA, CA)(RIGGING, LOADING, ...

BAC Cooling Tower (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $2,750.00 USD) ...[more]

Vertical Animal Feed Tank, Tank Dims.: Aprox.258” Tall x 112” Dia., with Man Ladder (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FE...

Motonier 3,000 Gal. S/S Horizontal Tank, 15 ft. Lx 75” Dia. (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $1,000.00 USD)

C.E. Howard 1,500 Gal. Horizontal Tank, S/N 3215(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $1,000.00 USD)

Sani Fab 2,500 Gal. Insulated Vertical Tank, M/NCCV, S/N 61089302, Cone Bottom, Mounted on S/S Legs (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SIT...

Sani Fab 2,500 Gal. Insulated Vertical Tank, M/NCCV, S/N 61089301, Cone Bottom, Mounted on S/S Legs (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SIT...

Crepaco ____ Gal. S/S Single Wall Mix Tank, S/NR0541, with (2) CIP Spray Balls, Mounted on S/S Legs (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SIT...

Damrow 50 Gal. S/S Balance Tank, Type: MV, S/NT4970, with 3 hp Centrifugal Pump (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $...

8-Station Rotary Tub Filler, with S/S InfeedFunnel Tamper Evident Seal Station with Film Holder (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE ...

Autoprod 8-Station Rotary Tub Filler, M/N RO-43,S/N AP-1161, 230 Volts, 3 Phase (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $...

S/S Scale Table, with S/S Platform S/S Table(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $100.00 USD)

Baldor 10 hp Motor, 230/460 Volts, 3 Phase, 3450RPM (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD) ...[more]

S/S Cap Feeder, Mounted on Portable Frame(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $150.00 USD)

S/S Piston Pump, with Aprox. 2” Clamp TypeInlet/Outlet, Mounted on S/S Frame (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $150...

VideoJet 37e Ink Jet Coder, Mounted on PortableFrame (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $200.00 USD) ...[more]

VideoJet 37e Ink Jet Coder, Mounted on PortableFrame (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $250.00 USD) ...[more]

Ricotta Cheese Traugh, with Aprox. 37” WConveyor, with Single Wall S/S Traugh, Includes 10 hp PD Pump Centrifugal Pump (LOCATED IN MANTECA, CA)(RI...

S/S Diaphragm Pump, Mounted on S/S Frame (LOCATEDIN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $200.00 USD) ...[more]

S/S Single Wall Trough, with Assorted Fittings(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $200.00 USD)

De-Laval 1-Section Plate Heat Exchanger, Mountedon S/S Frame (LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $350.00 USD)

Tri-Clover Tri-Blender Frame, with Motor (LOCATEDIN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD)

Okma S/S Separator, Type SM0723, Nr. 37139, withS/S Balance Tank, with Associated Motor, Guard, Panels (LOCATED IN MANTECA, CA)(RIGGING, LOADING,...

10 hp Centrifugal Pump, with S/S Head (LOCATED INMANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $150.00 USD)

Dayton Dust Collection Cyclone, with Top MountedMotor, with Bottom Collection Barrel, Mounted on Mild Steel Frame (LOCATED IN MANTECA, CA)(RIGGING...

CMD Packaging System Form Fill and SealMachine(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $1,000.00 USD) ...[more]

STAINLESS STEEL DUST COLLECTOR ON WHEELS.(LOCATEDIN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $350.00 USD) ...[more]

Key S/S Shaker Deck, M/N 429478-1, S/N 01-61449,Mounted on S/S Legs(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $1,000.00 USD)

4-Shelf Wire Shelving Unit, with PlasticTotes(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD) ...[more]

S/S Tumbler, with Portable S/S Base, TumblerDia.: Aprox. 136” Dia.(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $450.00 USD) .....

LINX Jet-A-Mark 6200 Series Ink Jet Coder, withS/S Stand(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD) ...[more]

Loveshaw Case Erector, M/N OF40T, S/N 28828440T,120 Volts(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $300.00 USD)

S/S Foamer, Mounted on Casters(LOCATED INMANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD)

Hotsy Water Tempering Unit, On PlasticCart(LOCATED IN MANTECA, CA)(RIGGING, LOADING, SITE MANAGEMENT FEE: $50.00 USD)