No Image
Auction closed
Timed auction

Auction dates

  • Ended Dec 13, 2016 4pm ET (9pm GMT)

Auction details

Currency: USD
Buyer's premium: 18.00%

Venue address

Online Only, Various Locations, 77 East Palatine Rd Prospect Heights, Illinois 60070 United States

Auction house

Add to favorites Ask a question phone_in_talk 312-280-1234

Refine your search

Estimate

Filter by Price Range

Category

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
63 item(s)
  • List
  • Grid
  • 63 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Max. Machining Diameter 3/4", Max. Machining Length per one chuck 7/9", Max. Drilling diameter up to .394", Spindle speed 200-10,000 RPM, Back wor...

Specifications: 14’ x 10’ Cutting Capacity (XY), 12” Motorized Z-axis Travel, Flow Master PC Controller and Software, Versio...

Max. Machining Diameter 3/4"/20mm, Max. Machining Length per one chuck 7.9"/200mm, Max. Drilling diameter up to .394"/10mm, Spindle speed 200-10,0...

Max. Machining Diameter 3/4"/20mm, Max. Machining Length per one chuck, 7.9", 200mm, Max. Drilling diameter up to .394"/10mm, Spindle speed 200-10...

Max. machining diameter 16mm, Max. machining length 200mm, Output 3.7 kW, Spindle speed 15,000 RPM, Spindle Indexing C-Axis 0.001 deg, Sub-Sp...

Max.swing/Over Carriage 21.25"/20.47", Max. Cutting Diameter 21.25", Travels X-Axis 20.87", Travel Y-Axis 5.5", Travel Z-Axis 42", B-Axis Head Con...

X-Axis Travel 510mm, Y-Axis Travel 420mm, Z-Axis travel 350mm, Distance from spindle center to table surface 180-530mm, Table dimensions 650mmx420...

U/V Travel +/- 1.28", Taper Angle 15 Deg @ 4.0" Thick, Taper Modes Sharp Corner, Cylindrical, Conical, Independent, Rapid Traverse 36.0 IPM, Wire ...

S/N SL-32-B4-1052, New 2004, Max. Capacity 1.259", Max. Machining Length 8.66", Tool Capacity: Turning OD 6, Front end working ID 7, Cross ...

General Specifications, Travel: , X-Axis 43" , Y-Axis 24" , Z-Axis 580 800/1100: Boxways 23.6" , Spindle Nose to Table Surface 5.3"-28.9" , Spindl...

General Specifications, Pallet Size (2) 24.8" , Travel: X-Axis 33.1" , Travel: Y-Axis 29.9" , Travel: Z-Axis 33.1" , Spindle Speed 10,000 RPM , Sp...

Specifications:, Table Size    26" X 14", Maximum Table Load    3,000 Lbs., Spindle Nose To Table Top    4" – 29", X Axis Travel    20", Y Axis Tr...

Diam. of column 8", Max. distance from column surface to spindle center 29 1/2", Min. distance from column surface to spindle center 8 5/8", Trave...

Tonnage 600 Ton, Capacities:  Mild steel over 6" die opening 5/8" x 16',  Mild steel over a 8" die opening 3/4" x 14', Overall length of bed and r...

Capacity at max. rake angle 12' x 3/4" (mild steel), Max. rake angle 11/16" per foot,  Blade size 1-1/8" x 5", Distance between housings 12' 3", T...

16.5"X, 12.6"Y, 10.6"Z, 10,000 RPM, Max. Tapping 6,000 RPM, 30 Taper, 1200/2000 IPM Rapid, 14 or 26 Position ATC, Coolant System, Hy...

GENERAL SPECIFICATIONS: Table working surface, T-Slotted 33" x 30", Max. Weight Capacity 8,000 Lbs, Blade length 15.'8:, Blade width/gauge 1...

Table size 23.62"x1.81", X-Axis travel 16.54", Y-Axis travel 11.81", Z-Axis Travel 9.84", Main motor 4.1 kW/3.1kW, Spindle Speed 6,000 RPM (3,000 ...

General Specifications, Maximum Swing 50" , Maximum Turning Diameter 43.3" , Maximum Weight on Chuck 4,409 Lbs. , Table/Chuck Diameter 40" , Max. ...

Working barstock dia. 8mm to 32mm, Max. Workpiece length 320 mm, Main spindle max. drilling dia. 12mm, Mains Spindle Max. Tapping dia. M10, B...

General Specifications, Machining diameter 32mm , Main spindle stroke 320mm , Spindle speed 8000 RPM C-Axis , Spindle Power 7.5 kW , Main spindle ...

General Specifications: S/N 041002, New 1999, Max. Bar Diameter 32mm , Main Spindle Stroke 310mm , Main Spindle Stroke with Driven Cone 295mm , Sp...

General Specifications, Max. Turning Diameter 3/4" (25/32") , Max. Headstock Stroke 8" , Max. Drilling Cap., Stationary Tool 25/64" (10mm) , Power...

General Specifications, Max. Turning Diameter 3/4" (25/32") , Max. Headstock Stroke 8" , Max. Drilling Cap., Stationary Tool 25/64" (10mm) , Power...

General Specifications, X-Axis Travel 19.7" , Y-Axis Travel 15.7" , Z-Axis Travel 11.8" , Distance Between Table top and Spindle 7.1" to 18.9" , W...

General Specifications, Table size 35.43" x 23.62" , Working area size 23.62" x 13.78" , Table index time 3 seconds , X-axis stroke 19.69" , Y-axi...

General Specifications, Machine: , X-Axis Travel 23.62" , Y-Axis Travel 15.7" , Z-Axis Travel 17.7" , Max. Weight of workpiece 3,500 lbs. , Max. E...

General Specifications, Travels: X 20" Y 20" Z 20" , Pallet Changer: , Pallet size 15.75"x15.75" , Change time 8 sec , Optional Full 4th Axis , Ca...

General Specifications, Travel: , X-Axis 16.14" , Y-Axis Spindle 15.55" , Z-Axis (Table back/front) 19.2" , Table to spindle center 0-15.55" , Tab...

General Specifications, Pallet size 19.7"x19.7" , Number of pallets 2 , Max. Pallet Load 1,100 lbs. , Spidle center to pallet top 2.0"-25.6" , Spi...

General Specifications, Travel: , X-axis22.05" , Y-axis20.08" , Z-axis20.08" , Distance from table top to spindle center 2.75" - 22.83" , Distance...

General Specifications, Max. swing 26" , Max. swing over carriage 19.7" - 26" , Note: Depends upon workpiece length, tool magazine , type and Y Ax...

General Specifications, Max. swing/Max. turn 9.06"/9.06" , Max. bar cap 1-5/8" , Dist. Between Spindles 40.06" , Spindle Nose/Bore A2.6/2.4" , Spi...

General Specifications, Swing over bed 21" , Swing over Cross slide 14.5" , Distance between centers 80" , Spindle nose 11" DI Camlock , Spindle S...

General Specifications, Max. Swing Over Bedways 27.9" , Max. Swing Over Carriage 18.8" , Distance Between Centers 154" , Max. Turning Diameter 11....

General Specifications, Chuck size 15"-24" , Max. Swing 31" , Std. Cutting Dia. 22" , Z Travel 24.4" , Max. Part Weight 2,640 lbs. , Tool System 6...

General Specifications, Moving gantry fixed table style , Table size: 60" x 120" Travels: , X axis60" , Y axis120" , Z axis6" , Feed rates: , X ax...

General Specifications, Table 8'x10' , Router Spindle 7 HP Columbo , Table Phenolic grid , Plumped Vacuum Table , Dual Servo Rack & Pinion , Servo...

Max. Profile Size 44"x28",Max. Plate Width 48", Flange Bevels +/- 45 deg., Web Bevels +/- 45 deg (external only), Max. Material Thickness 6", Trav...

General Specifications: S/N V100144, New 2007, Machine Strokes: , Pallet Sizes 23.6" x 15.7" Travel: X25.6" Y19.7" Z17.7" , Table top to spindle f...

General Specifications, Table size 16.1" x 35.4" , Maximum table load 1,100 Lbs. , Spindle nose to table top 4.9"-23.0" , X Axis travel 30" , Y Ax...

General Specifications: S/N 02585, New 1995, Pallet , Pallet size 300x500(11.8"x19.7") , Pallet change time sec 7.5 , Table load capacity kg 80 (...

General Specifications, Table size 41"x22" , Max. Table Load 1760 Lbs. , Spindle Nose to Table Top 5.9"-25.9" , X Axis Travel 40.15" , Y Axis Trav...

General Specifications, Table size 57.5" x 20" , Max. Table Load 1,210 Lbs. , X-Axis Travel 44" , Y-Axis Travel 16" , Z-Axis Travel 20" , Rapid tr...

General Specifications, Table size 47.2" x 22" , Table load capacity 2,200 lbs. , Max. Workpiece 40.7" x 22" x 24.8" , Table surface to Spindle En...

General Specifications; S/N 55026, New 1986, Table size 98.5" x 33.5" , Table load capacity 6,600 lbs. , Spindle Nose to Table 9.9"-37.9" , X-Axi...

General Specifications, Table size (machine surface) 45.27"x19.68" , Pallet size 45"x19" , Table load capacity 1,540 lbs. , Table Top to Spindle N...

General Specifications, Outer Diameter 88" , Channel width 4" , Channel number 5 , Height 52" , Travel 70 , Working Capacity 17'3" , Motor type Un...

General Specifications, Capacity: , Infeed.004 to 1.5" dia. , Thrufeed .004 to 1.5" dia. , Length12' on .5" dia. Wheels: , Grinding wheel, maximum...

General Specifications, Diameter of Spindle 4-1/8" , Spindle Taper #50 , Spindle out Travel 23-1/2" , Rotary Table size 55" x 55" , Table Travel (...

General Specifications, Capacity25,000 LBS , Fork length 60" , Fork width 11" , Lift height 10' , Dimensions 179"L w/Forks x 62"W x 109" Tall , We...

General Specifications, Max. Diameter of work 6.25" , Min. Diameter of work .25" , Max. Workpiece length 27" , Min. Length of work 3" , Max. Swing...

General Specifications, Diameter of table 105mm (4.1") , with Sub table 130mm(5.1") , Diameter of spindle hole 2.36"x1.18" , Centre height (90 deg...

General Specifications: S/N 900271A,900271b, New 2000, Platter: , Diameter 6.3" , Number of Std T-Slots 6@ 60 Deg. , Spindle-A (Tilt) , Max. Spee...

General Specifications, Capacity (Diameter) .375"-3.125" , Capacity (Length) 48" , Feed length accuracy +/- 0.01" , Minimum Bar Length 15" , Tray ...

General Specifications, Capacity (Diameter) .375"-3.125" , Capacity (Length) 48" , Feed length accuracy +/- 0.01" , Minimum Bar Length 15" , Tray ...

General Specifications, Maximum bar capacity: , Round1 3/16" , Hexagon1.0" , Square13/16" , Maximum length fed out at one tripping 3 9/166" , Spin...

Okuma LB15II-M 3-Axis CNC Lathe with C-Axis & Live Tooling, S/N 0881, New 1993,  Distance between centers 20.47" , Swing over bed & carriage...

Technical Specification:  Moderate Temperature: 25 to 200F,  Work Space Liner: 304 series Stainless Steel,  Chamber Dimensions: 48" ...

Technical Specification,  Moderate Temperature: -25 F to + 200 F,  Work Space Liner: 304 series Stainless Steel,  Chamber Dimensions: 48" x ...

Loading...Loading...
  • 63 item(s)
    /page

Recently Viewed Lots