5
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
5
SWING DIAMETER S.A.E METRIC, Over Front Apron 31.8 in 806 mm, Over Cross Slide 20.8 in 527 mm, Over Second Spindle 21.8 in 552 mm, CAPACITIES S.A.E METRIC, Chuck Size 10.0 in 254 mm, Max Cutting Diameter (varies with turret) 18.0 in 457 mm, Max Cutting Length (without workholding) 23 in 584 mm, Bar Capacity 3.00 in 76 mm, TRAVELS S.A.E METRIC, X Axis 12.5 in 318 mm, Z Axis 23.0 in 584 mm, FEEDRATES S.A.E METRIC, Rapids on X 472 ipm 12.0 m/min, Rapids on Y 472 ipm 12.0 m/min, Rapids on Z 945 ipm 24.0 m/min, AXIS MOTORS S.A.E METRIC, Max Thrust X 4100 lbf 18238 N, Max Thrust Y 2300 lbf 10231 N, Max Thrust Z 5100 lbf 22686 N, SPINDLE S.A.E METRIC, Spindle Nose A2-6 A2-6, Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive, Max Rating 30.0 hp 22.4 kW, Max Speed 4500 rpm 4500 rpm, Max Torque 275 ft-lbf @ 600 rpm 373 Nm @ 600 rpm, Spindle Bore ø 3.50 in 88.9 mm, MAIN SPINDLE C AXIS S.A.E METRIC, Max Rating 5.0 hp 3.7 kW, Positioning (±) 0.01 ° 0.01 °, Brake Clamp Force 1000 lbf 4448 N, Brake Diameter 14.4 in 366 mm, Control Type Interpolated Motion and Positioning Interpolated Motion and Positioning, SECONDARY SPINDLE S.A.E METRIC, Chuck Size 8.3 in 210 mm, Spindle Nose A2-5 A2-5, Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive, , Max Speed 4800 rpm 4800 rpm, Max Torque 110 ft-lbf @ 700 rpm 149 Nm @ 700 rpm, Spindle Bore ø 2.00 in 50.8 mm, Bar Capacity 2.00 in 51 mm, SECONDARY SPINDLE POSITIONING S.A.E METRIC, Brake Clamp Force 500 lbf 2224 N, Brake Diameter 7.0 in 178 mm, Control Type Positioning Only Positioning Only, TURRET S.A.E METRIC, Number of Tools 12 Stations 12 Stations, OD vs ID Tools Any Combination (will vary with turret) Any Combination (will vary with turret), Boring Bar Rear Clearance (from back of turret ) 4.00 in 102.0 mm, LIVE TOOLING S.A.E METRIC, Max Speed 6000 rpm 6000 rpm, Drive Ratio 1:1 1:1, Tooling BMT65 BMT65, GENERAL S.A.E METRIC, Coolant Capacity 55 gal 208 L, AIR REQUIREMENTS S.A.E METRIC, Air Required 4 scfm @ 100 psi 113 L/min @ 6.9 bar, Inline Air Hose 3/8 in 3/8 in, Coupler (Air) 3/8 in 3/8 in, Air Pressure Min 80 psi 5.5 bar, ELECTRICAL SPECIFICATION S.A.E METRIC, Spindle Speed 4500 rpm 4500 rpm, Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive, Spindle Power 30.0 hp 22.4 kW, Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC, Full Load Amps (3 Phase) - Low 70 A 70 A, Input AC Voltage (3 Phase) - High 440 VAC 440 VAC, Full Load Amps (3 Phase) - High 35 A 35 A, Equipped With, HAAS CNC CONTROL, MAIN AND SUB SPINDLE WITH 3-JAW CHUCKS (1) SAMCHULLY, (1) KITAGAWA,, ROYAL 16C COLLET CHUCK, AUTO JET AIR BLAST, AUTOMATIC TOOL PRESETTER, EARLY POWER FAILURE DETECTION, ETHERNET INTERFACE, 750 MB EXPANDED MEMORY, 3 EPPINGER 4.200.956 STRAIGHT DRIVEN TOOL HOLDERS, 1 RIGHT ANGLE DRIVEN TOOL HOLDER, MISC TURRET TOOL HOLDERS, INTERNAL HIGH VOLTAGE ISOLATED TRANSFORMER, BELT TYPE CHIP CONVEYOR, WORK GAUGING PROBE, LIVE TOOL TURRET WITH C-AXIS, Y-AXIS MOTION ON TURRET, NEW PRICE APPROX $185,000 (Rigging fees $2,000.00) -Location: Gaithersburg, Maryland
For Premier Asset Recovery Group delivery information please telephone 312-280-1234.
Online Only Auction:
Online bidding opens: February 13, 2019 @ 9:00 am
Online Bidding Closes: Wednesday, February 27, 2019 @ 11:00 Am
Inspection:
Contact 312-280-1234 ext. 608
Or email Maribel@premierarg.com
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
1. IDENTIFICATION: All Participants are required to register prior to becoming an Approved Bidder. All Participants are required to give full name, permanent street address, phone numbers, email address, valid credit card and business name. Subsequent to registration on BidSpotter, approval to bid is at our discretion.
2. PAYMENT: Invoices must be paid in full by Friday, March 1, 2019. Payment may be made by wire transfer, company check with a bank letter of guarantee, certified funds or cash. A BUYERS FEE OF 18% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE. Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS A PROPER EXEMTION. NO MERCHANDISE WILL BE RELEASED UNITIL INVOICE IS PAID IN FULL.
3. Purchase of any lot is at the Purchaser's risk with risk of loss immediately passing to Purchaser upon the auctioneer's call. Neither Premier Asset Recovery Group, LLC, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause.
4. REMOVAL: All purchases MUST be removed as herein listed. Small items (Tooling, Machine Parts & Accessories, etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION. WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE. All other Machinery & Equipment must be removed by Friday, March 22, 2019.
5. Purchases may be removed only on presentation of paid bill. Removal shall be at the expense, risk and liability of the purchaser. Auctioneer shall not be responsible for goods not removed within the time allowed.
6. CONDITION: All Items are sold on “as is – where is”, “in place”, “with all faults” basis no conditions or warranties or representation, written or oral, is given with any lot. All statements contained in Premier Asset Recovery, LLC catalog, website, and marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described. Description and Photos are not guaranteed. Make yourself available e for the Inspection period. It is the buyer’s responsibility to inspect before biding. Premier Asset Recovery Group assumes no liability for error or omissions associated with the auction sale. The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain the fitness or use of the assets being purchased.
7. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT.
8. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled hereto.
9. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser.
10. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.
11. CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, PROPER INSURANCE protecting Premier Asset Recovery Group, LLC and the people or company that the auctioneers are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for the auctioneer`s protection - NOT FOR THE PURCHASER`S therefore the auctioneer suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the equipment they may be moving for the purchaser.
12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk.
13. It is the Purchaser’s sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain “hazardous substances”, as that term is defined under federal, state or local environmental laws and regulations. Premier has no duty to remove any hazardous substances that are contained in or are a part of any items. Purchasers agree to defend (by counsel satisfactory to Premier) and indemnify Premier and hold Premier harmless from any against any claim. Demand, cause of action, liability or expense (including attorney’s fees and costs) asserted against or incurred by Premier in connection with the sale, removal, shipment, or use of any purchased items.
14. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision will be final and absolute.
15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.
16. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers.
17. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
18. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller.
19 These terms and conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal law of the State of Illinois, without regard to conflict of law’s provisions. All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of Illinois located in Cook County.
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
SWING DIAMETER S.A.E METRIC, Over Front Apron 31.8 in 806 mm, Over Cross Slide 20.8 in 527 mm, Over Second Spindle 21.8 in 552 mm, CAPACITIES S.A.E METRIC, Chuck Size 10.0 in 254 mm, Max Cutting Diameter (varies with turret) 18.0 in 457 mm, Max Cutting Length (without workholding) 23 in 584 mm, Bar Capacity 3.00 in 76 mm, TRAVELS S.A.E METRIC, X Axis 12.5 in 318 mm, Z Axis 23.0 in 584 mm, FEEDRATES S.A.E METRIC, Rapids on X 472 ipm 12.0 m/min, Rapids on Y 472 ipm 12.0 m/min, Rapids on Z 945 ipm 24.0 m/min, AXIS MOTORS S.A.E METRIC, Max Thrust X 4100 lbf 18238 N, Max Thrust Y 2300 lbf 10231 N, Max Thrust Z 5100 lbf 22686 N, SPINDLE S.A.E METRIC, Spindle Nose A2-6 A2-6, Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive, Max Rating 30.0 hp 22.4 kW, Max Speed 4500 rpm 4500 rpm, Max Torque 275 ft-lbf @ 600 rpm 373 Nm @ 600 rpm, Spindle Bore ø 3.50 in 88.9 mm, MAIN SPINDLE C AXIS S.A.E METRIC, Max Rating 5.0 hp 3.7 kW, Positioning (±) 0.01 ° 0.01 °, Brake Clamp Force 1000 lbf 4448 N, Brake Diameter 14.4 in 366 mm, Control Type Interpolated Motion and Positioning Interpolated Motion and Positioning, SECONDARY SPINDLE S.A.E METRIC, Chuck Size 8.3 in 210 mm, Spindle Nose A2-5 A2-5, Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive, , Max Speed 4800 rpm 4800 rpm, Max Torque 110 ft-lbf @ 700 rpm 149 Nm @ 700 rpm, Spindle Bore ø 2.00 in 50.8 mm, Bar Capacity 2.00 in 51 mm, SECONDARY SPINDLE POSITIONING S.A.E METRIC, Brake Clamp Force 500 lbf 2224 N, Brake Diameter 7.0 in 178 mm, Control Type Positioning Only Positioning Only, TURRET S.A.E METRIC, Number of Tools 12 Stations 12 Stations, OD vs ID Tools Any Combination (will vary with turret) Any Combination (will vary with turret), Boring Bar Rear Clearance (from back of turret ) 4.00 in 102.0 mm, LIVE TOOLING S.A.E METRIC, Max Speed 6000 rpm 6000 rpm, Drive Ratio 1:1 1:1, Tooling BMT65 BMT65, GENERAL S.A.E METRIC, Coolant Capacity 55 gal 208 L, AIR REQUIREMENTS S.A.E METRIC, Air Required 4 scfm @ 100 psi 113 L/min @ 6.9 bar, Inline Air Hose 3/8 in 3/8 in, Coupler (Air) 3/8 in 3/8 in, Air Pressure Min 80 psi 5.5 bar, ELECTRICAL SPECIFICATION S.A.E METRIC, Spindle Speed 4500 rpm 4500 rpm, Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive, Spindle Power 30.0 hp 22.4 kW, Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC, Full Load Amps (3 Phase) - Low 70 A 70 A, Input AC Voltage (3 Phase) - High 440 VAC 440 VAC, Full Load Amps (3 Phase) - High 35 A 35 A, Equipped With, HAAS CNC CONTROL, MAIN AND SUB SPINDLE WITH 3-JAW CHUCKS (1) SAMCHULLY, (1) KITAGAWA,, ROYAL 16C COLLET CHUCK, AUTO JET AIR BLAST, AUTOMATIC TOOL PRESETTER, EARLY POWER FAILURE DETECTION, ETHERNET INTERFACE, 750 MB EXPANDED MEMORY, 3 EPPINGER 4.200.956 STRAIGHT DRIVEN TOOL HOLDERS, 1 RIGHT ANGLE DRIVEN TOOL HOLDER, MISC TURRET TOOL HOLDERS, INTERNAL HIGH VOLTAGE ISOLATED TRANSFORMER, BELT TYPE CHIP CONVEYOR, WORK GAUGING PROBE, LIVE TOOL TURRET WITH C-AXIS, Y-AXIS MOTION ON TURRET, NEW PRICE APPROX $185,000 (Rigging fees $2,000.00) -Location: Gaithersburg, Maryland
For Premier Asset Recovery Group delivery information please telephone 312-280-1234.
Online Only Auction:
Online bidding opens: February 13, 2019 @ 9:00 am
Online Bidding Closes: Wednesday, February 27, 2019 @ 11:00 Am
Inspection:
Contact 312-280-1234 ext. 608
Or email Maribel@premierarg.com
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
1. IDENTIFICATION: All Participants are required to register prior to becoming an Approved Bidder. All Participants are required to give full name, permanent street address, phone numbers, email address, valid credit card and business name. Subsequent to registration on BidSpotter, approval to bid is at our discretion.
2. PAYMENT: Invoices must be paid in full by Friday, March 1, 2019. Payment may be made by wire transfer, company check with a bank letter of guarantee, certified funds or cash. A BUYERS FEE OF 18% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE. Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS A PROPER EXEMTION. NO MERCHANDISE WILL BE RELEASED UNITIL INVOICE IS PAID IN FULL.
3. Purchase of any lot is at the Purchaser's risk with risk of loss immediately passing to Purchaser upon the auctioneer's call. Neither Premier Asset Recovery Group, LLC, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause.
4. REMOVAL: All purchases MUST be removed as herein listed. Small items (Tooling, Machine Parts & Accessories, etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION. WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE. All other Machinery & Equipment must be removed by Friday, March 22, 2019.
5. Purchases may be removed only on presentation of paid bill. Removal shall be at the expense, risk and liability of the purchaser. Auctioneer shall not be responsible for goods not removed within the time allowed.
6. CONDITION: All Items are sold on “as is – where is”, “in place”, “with all faults” basis no conditions or warranties or representation, written or oral, is given with any lot. All statements contained in Premier Asset Recovery, LLC catalog, website, and marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described. Description and Photos are not guaranteed. Make yourself available e for the Inspection period. It is the buyer’s responsibility to inspect before biding. Premier Asset Recovery Group assumes no liability for error or omissions associated with the auction sale. The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain the fitness or use of the assets being purchased.
7. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT.
8. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled hereto.
9. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser.
10. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.
11. CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, PROPER INSURANCE protecting Premier Asset Recovery Group, LLC and the people or company that the auctioneers are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for the auctioneer`s protection - NOT FOR THE PURCHASER`S therefore the auctioneer suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the equipment they may be moving for the purchaser.
12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk.
13. It is the Purchaser’s sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain “hazardous substances”, as that term is defined under federal, state or local environmental laws and regulations. Premier has no duty to remove any hazardous substances that are contained in or are a part of any items. Purchasers agree to defend (by counsel satisfactory to Premier) and indemnify Premier and hold Premier harmless from any against any claim. Demand, cause of action, liability or expense (including attorney’s fees and costs) asserted against or incurred by Premier in connection with the sale, removal, shipment, or use of any purchased items.
14. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision will be final and absolute.
15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.
16. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers.
17. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
18. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller.
19 These terms and conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal law of the State of Illinois, without regard to conflict of law’s provisions. All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of Illinois located in Cook County.