21
Eurotech (Biglia) Rapido B 426 Y2 CNC Mill Turn Center Tooled for AR-15 Bolt in 6 minutes, 2
1/14
Auctioneer has chosen not to publish the price of this lot
Prospect Heights , Illinois
0.00%
18.00%
Description
Eurotech (Biglia) Rapido B 426 Y2 CNC Mill Turn Center Tooled for AR-15 Bolt in 6 minutes, 2 Turrets, Live Tooling, 2 Y-Axis, S/N 12680, New 2015 Specifications, Eurotech Precision Twin Spindle, Twin Turret, Dual Y-Axis, plus Z2 Turning Center, Quality Machinery Systems, Inc. and Eurotech Elite are proud to present the Eurotech model, Rapido B 436 Y2 Turning and Milling Center equipped for “Superimposition” operation., To Machine The AR-15 Bolt in 6 Minutes!, 1.42” Bar Capacity, 1.97” of Y-Axis Stroke on both turrets, 15 HP Main Spindle and Sub-Spindle Motors, C-Axis Main and Sub-Spindles, 24 Live Tooling Stations – Up to 192 Cutting Tools, Clear-Shift Sub-Spindle (E-Axis), 7,000 RPM Spindle Speeds, Machine:, Mitsubishi M730 VS-L CNC control unit with 10.4” Color LCD Display, SSS Control (Super Smooth Surface for determining appropriate shapes and avoiding unnecessary decelerations.), Nano Interpolation (Controls the machine in the least command increment of 1nm.), OMR Control (High Speed and Accuracy Control of driving system by estimating paths of machine-end.), High-Speed Microprocessor CNC System., 45° Slant bed design provides extra rigidity for heavy machining., Two spindles and two turrets., 10-Axis simultaneous machining plus 2 axes for CNC controlled gantry parts catcher, Independent dedicated Y-axis slides for increased speed and flexibility., Main spindle for first operation work., Sub-spindle for secondary operation work. Equipped with “Superimposition”, C-Axis on main and sub with scale feedback., Disk Brakes on both main and sub-spindles., Sub-Spindle provides the capability to finish both sides of a workpiece in a single operation., Automatic part transfer from the main spindle to the sub spindle, round stock or irregular shapes., CNC controlled gantry parts catcher driven by programmable servo motor., Parts conveyor, Rigid tapping on main spindle, Sub-Spindle, and live tooling spindles., Sub-Spindle ejector and Coolant through the spindle clean out., 7,000 RPM main spindle and 7,000 RPM Sub-Spindle Speeds., 15 HP Integrated spindle motor., 15 HP synchronized Sub-Spindle, 6,000 RPM, Hi-Torque 3-HP, 12-station upper turret (12-live tooling), 12-Station lower turret (12-live tooling), 0.10 Seconds/ Station turret indexing., Air conditioned electronics cabinet., Machine Features:, Design and Construction:, The machine bed is a stiff and compact construction of, stress-released steel, 45° slant bed. The upper and lower, cross-slide assembly is made of longitudinal slides “Z1 and, Z2” and transversal slides “X1 and X2” traversing on roller, Guideways, fully protected. The “Y1 and Y2” slides are, moving at 45° to their “X”-axis slide and traversing on, protected roller railways. “C”-axis on the Main and Sub-, Spindle allows for performing Milling, Drilling, Tapping,, and Cam profiles by the interpolation of X – Z – C – Y-axes., It includes disk brake on both spindles., Main Spindle:, Built-In Main Spindle Head is driven by an Integral Spindle Motor, self-lubricated and liquid, cooled. The integral design allows for reduced vibration and noise while increasing top RPM and, efficiency. It rotates on two sets of high-precision bearings, combined ball bearings at the front,, and two crown of rollers at the back. It features a built-actuator, equipped with pressure reducer, to adjust part clamping force, safety switches and coolant pick-up unit., Sub-Spindle:, Built-In Sub-Spindle Unit is driven by an Integral Spindle Motor, self-lubricated and liquid, cooled. The integral design allows for reduced vibration and noise while increasing top RPM and, efficiency. It is fitted opposite to the main spindle, on a cross slide assembly with longitudinal, travel controlled by the Z3-axis and transversal travel operated by X3 axis, (Sub-spindle can be, offset from the main spindle). It slides on fully protected ball screws. It features a built-in actuator,, equipped with pressure reducer to adjust part clamping force, safety switches and coolant pick-up, unit. The Sub-Spindle is equipped with:, Function for synchronizing rotation and timing with the main spindle., Cleaning of jaws or Collet featuring coolant through, the spindle to use filtered coolant-connected to a, 101.53 PSI pump., Pneumatic ejector equipped with safety switch to, check that the component has been ejected-operated, by M-code. Ejector stroke: 2.95”, B-axis load detection system to stop machining cycle, in event of a crash or non-cut component., Clear-Shift feature eliminated interference problems, between the two turrets by offsetting the Sub-Spindle, form the Main., Possibility to use the Sub-Spindle as a regular, tailstock to hold the component machined on the, main spindle with T1 and simultaneously perform, finishing with T2., Simultaneous “Follow Up” machining using three, tools thanks to the “Superimposition” function. (Main spindle uses one side of the turret, at the same time the Sub-Spindle is using the other side), Upper Turret and Lower Turrets:, With two independently controlled turrets, the B436Y2, provides full 10-axis machining capability., The two turrets have 12 tooling stations; either turret can work, on either spin dial., Simultaneous O.D. and I.D. cutting, or O.D. cutting at two, points is possible. Idle time is also reduced, because of, Eurotech’s world famous Gap Elimination ladder, which, slashes idle times., Both turrets provide fast indexing of 0.10 seconds station to, station. Bi-directional turret indexing allows the turrets to, automatically take the shortest path to the next selected cutting, tool station. The upper and lower turrets are interference free,, Location: Prospect Heights, IL
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Eurotech (Biglia) Rapido B 426 Y2 CNC Mill Turn Center Tooled for AR-15 Bolt in 6 minutes, 2 Turrets, Live Tooling, 2 Y-Axis, S/N 12680, New 2015 Specifications, Eurotech Precision Twin Spindle, Twin Turret, Dual Y-Axis, plus Z2 Turning Center, Quality Machinery Systems, Inc. and Eurotech Elite are proud to present the Eurotech model, Rapido B 436 Y2 Turning and Milling Center equipped for “Superimposition” operation., To Machine The AR-15 Bolt in 6 Minutes!, 1.42” Bar Capacity, 1.97” of Y-Axis Stroke on both turrets, 15 HP Main Spindle and Sub-Spindle Motors, C-Axis Main and Sub-Spindles, 24 Live Tooling Stations – Up to 192 Cutting Tools, Clear-Shift Sub-Spindle (E-Axis), 7,000 RPM Spindle Speeds, Machine:, Mitsubishi M730 VS-L CNC control unit with 10.4” Color LCD Display, SSS Control (Super Smooth Surface for determining appropriate shapes and avoiding unnecessary decelerations.), Nano Interpolation (Controls the machine in the least command increment of 1nm.), OMR Control (High Speed and Accuracy Control of driving system by estimating paths of machine-end.), High-Speed Microprocessor CNC System., 45° Slant bed design provides extra rigidity for heavy machining., Two spindles and two turrets., 10-Axis simultaneous machining plus 2 axes for CNC controlled gantry parts catcher, Independent dedicated Y-axis slides for increased speed and flexibility., Main spindle for first operation work., Sub-spindle for secondary operation work. Equipped with “Superimposition”, C-Axis on main and sub with scale feedback., Disk Brakes on both main and sub-spindles., Sub-Spindle provides the capability to finish both sides of a workpiece in a single operation., Automatic part transfer from the main spindle to the sub spindle, round stock or irregular shapes., CNC controlled gantry parts catcher driven by programmable servo motor., Parts conveyor, Rigid tapping on main spindle, Sub-Spindle, and live tooling spindles., Sub-Spindle ejector and Coolant through the spindle clean out., 7,000 RPM main spindle and 7,000 RPM Sub-Spindle Speeds., 15 HP Integrated spindle motor., 15 HP synchronized Sub-Spindle, 6,000 RPM, Hi-Torque 3-HP, 12-station upper turret (12-live tooling), 12-Station lower turret (12-live tooling), 0.10 Seconds/ Station turret indexing., Air conditioned electronics cabinet., Machine Features:, Design and Construction:, The machine bed is a stiff and compact construction of, stress-released steel, 45° slant bed. The upper and lower, cross-slide assembly is made of longitudinal slides “Z1 and, Z2” and transversal slides “X1 and X2” traversing on roller, Guideways, fully protected. The “Y1 and Y2” slides are, moving at 45° to their “X”-axis slide and traversing on, protected roller railways. “C”-axis on the Main and Sub-, Spindle allows for performing Milling, Drilling, Tapping,, and Cam profiles by the interpolation of X – Z – C – Y-axes., It includes disk brake on both spindles., Main Spindle:, Built-In Main Spindle Head is driven by an Integral Spindle Motor, self-lubricated and liquid, cooled. The integral design allows for reduced vibration and noise while increasing top RPM and, efficiency. It rotates on two sets of high-precision bearings, combined ball bearings at the front,, and two crown of rollers at the back. It features a built-actuator, equipped with pressure reducer, to adjust part clamping force, safety switches and coolant pick-up unit., Sub-Spindle:, Built-In Sub-Spindle Unit is driven by an Integral Spindle Motor, self-lubricated and liquid, cooled. The integral design allows for reduced vibration and noise while increasing top RPM and, efficiency. It is fitted opposite to the main spindle, on a cross slide assembly with longitudinal, travel controlled by the Z3-axis and transversal travel operated by X3 axis, (Sub-spindle can be, offset from the main spindle). It slides on fully protected ball screws. It features a built-in actuator,, equipped with pressure reducer to adjust part clamping force, safety switches and coolant pick-up, unit. The Sub-Spindle is equipped with:, Function for synchronizing rotation and timing with the main spindle., Cleaning of jaws or Collet featuring coolant through, the spindle to use filtered coolant-connected to a, 101.53 PSI pump., Pneumatic ejector equipped with safety switch to, check that the component has been ejected-operated, by M-code. Ejector stroke: 2.95”, B-axis load detection system to stop machining cycle, in event of a crash or non-cut component., Clear-Shift feature eliminated interference problems, between the two turrets by offsetting the Sub-Spindle, form the Main., Possibility to use the Sub-Spindle as a regular, tailstock to hold the component machined on the, main spindle with T1 and simultaneously perform, finishing with T2., Simultaneous “Follow Up” machining using three, tools thanks to the “Superimposition” function. (Main spindle uses one side of the turret, at the same time the Sub-Spindle is using the other side), Upper Turret and Lower Turrets:, With two independently controlled turrets, the B436Y2, provides full 10-axis machining capability., The two turrets have 12 tooling stations; either turret can work, on either spin dial., Simultaneous O.D. and I.D. cutting, or O.D. cutting at two, points is possible. Idle time is also reduced, because of, Eurotech’s world famous Gap Elimination ladder, which, slashes idle times., Both turrets provide fast indexing of 0.10 seconds station to, station. Bi-directional turret indexing allows the turrets to, automatically take the shortest path to the next selected cutting, tool station. The upper and lower turrets are interference free,, Location: Prospect Heights, IL
50 HIGH END CNC MACHINE TOOLS - CNC Exchange Consignment Sale – Multiple Locations
Ends from
Venue Address
Assets in Multiple Locations
Prospect Heights
Illinois
60070
United States
For Premier Asset Recovery Group delivery information please telephone 312-280-1234.
Important Information
Online Only Auction:
Online bidding opens: Monday, June 3, 2019 at 9:00 AM
Online Bidding Closes: Wednesday, June 19, 2019 at 11:00 AM
Inspection:
Inspection by appointment, Contact 312-280-1234 ext. 608
Or email Maribel@premierarg.com
Loction for Prospect Heights, IL
75 E Palatine Road, Prospect Heights, IL 60070
Full catalog coming soon. Register now!
-
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms and Conditions
1. IDENTIFICATION: All Participants are required to register prior to becoming an Approved Bidder. All Participants are required to give full name, permanent street address, phone numbers, email address, valid credit card and business name. Subsequent to registration on BidSpotter, approval to bid is at our discretion.
2. PAYMENT: Invoices must be paid in full by Friday, June 21, 2019. Payment may be made by wire transfer, company check with a bank letter of guarantee, certified funds or cash. A BUYERS FEE OF 18% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE. Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS A PROPER EXEMTION. NO MERCHANDISE WILL BE RELEASED UNITIL INVOICE IS PAID IN FULL.
3. Purchase of any lot is at the Purchaser's risk with risk of loss immediately passing to Purchaser upon the auctioneer's call. Neither Premier Asset Recovery Group, LLC, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause.
4. REMOVAL: All purchases MUST be removed as herein listed. Small items (Tooling, Machine Parts & Accessories, etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION. WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE. All other Machinery & Equipment must be removed by Thursday, July 11,2019.
5. Purchases may be removed only on presentation of paid bill. Removal shall be at the expense, risk and liability of the purchaser. Auctioneer shall not be responsible for goods not removed within the time allowed.
6. CONDITION: All Items are sold on “as is – where is”, “in place”, “with all faults” basis no conditions or warranties or representation, written or oral, is given with any lot. All statements contained in Premier Asset Recovery, LLC catalog, website, and marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described. Description and Photos are not guaranteed. Make yourself available e for the Inspection period. It is the buyer’s responsibility to inspect before biding. Premier Asset Recovery Group assumes no liability for error or omissions associated with the auction sale. The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain the fitness or use of the assets being purchased.
7. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT.
8. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled hereto.
9. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser.
10. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.
11. CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, PROPER INSURANCE protecting Premier Asset Recovery Group, LLC and the people or company that the auctioneers are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for the auctioneer`s protection - NOT FOR THE PURCHASER`S therefore the auctioneer suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the equipment they may be moving for the purchaser.
12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk.
13. It is the Purchaser’s sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items. Certain of the items for sale may contain “hazardous substances”, as that term is defined under federal, state or local environmental laws and regulations. Premier has no duty to remove any hazardous substances that are contained in or are a part of any items. Purchasers agree to defend (by counsel satisfactory to Premier) and indemnify Premier and hold Premier harmless from any against any claim. Demand, cause of action, liability or expense (including attorney’s fees and costs) asserted against or incurred by Premier in connection with the sale, removal, shipment, or use of any purchased items.
14. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision will be final and absolute.
15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.
16. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers.
17. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.
18. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller.
19 These terms and conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and construed in accordance with the internal law of the State of Illinois, without regard to conflict of law’s provisions. All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of Illinois located in Cook County.
