Lot

46

Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002

In 50 HIGH TECH CNC MACHINES ONLINE AUCTION BY CN...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 312-280-1234 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/11
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 1 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 2 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 3 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 4 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 5 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 6 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 7 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 8 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 9 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 10 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 1 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 2 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 3 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 4 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 5 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 6 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 7 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 8 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 9 of 10
Blohm Profimat MC607 CNC Creepfeed Profile Grinder, S/N 14-969, New 2002 - Image 10 of 10
Auctioneer has chosen not to publish the price of this lot
Prospect Heights , Illinois
0.00%
18.00%

Blohm Profimat MC607 CNC Creepfeed Profile Grinder, Specifications, Column Travel longitudinal, Max. X-Axis 27.5", Column Speed, Electro-mechanical 0.98-984 IPM, Cross Travel, Automatic Max. Z-Axis 13", Wheel head infeed, Automatic minimum 0.000050", Wheel head travel Vertical Y-Axis 21.5", Grinding Spindle drive, A.C 80 HP from 1500 RPM, Grinding Wheel width, Max. With ganged wheels 20"x8"x8", Floor Space required 6.6'x13'x8.5', Machine weight approx. 15,000 lbs., X-Axis (Machine Column - Longitudinal Traverse), Guide-ways preloaded anti-friction guideway, Feed System Recirculating Ball Screw, Drive System A.C. Servo Motor, Speed 0.98 - 984 IPM, Position measurements Direct Encoder, Input/output resolution 0.000050", Y-Axis (Grinding Wheel Head-Vertical Traverse), Guideways Preloaded antifriction guideway, Feed system Recirculating ball screw, Drive System A.C. Servo Motor, Speed 0.16-148 IPM, Position Measurements Linear glass measuring scale, Input/output resolution 0.000050", Z-Axis (Cross Traverse), Guideways Preloaded antifriction guideway, Feed system Recirculating ball screw, Drive System A.C. Servo Motor, Speed 0.16- 157 IPM, Position Measurements Linear Glass Measuring Scale, Input/output resolution 0.000050", C-Axis (Grinding Spindle Drive) 80 HP from 1500 RPM, Grinding Spindle Speed Infinitely variable in a range of 45-7000 RPM, Drive Direct via Flexible Coupling, Grinding Spindle high precision cartridge-type spindle, diameter 5.5", Lubrication Pregreased and sealed for life, Machine Control, GE Fanuc 18i with Integrated PLC for machine axes (X, Y and Z), Grinding Cycles, L 936 Plunge cut grinding, with manual feed, L 935 Surface grinding, manual with continuous cross feed, L 933 Plunge cut grinding, with intermittent down feed and sparking out, L 934 Surface grinding, with intermittent down feed and sparking out, L 993 Jog to operation range limits, L 994 Jog to loading position, L 930 Creep feed grinding, Dressing Cycles, L 941 Dressing w/single point diamond form machine table, Linear Interpolation with 3 axes out of 3 (X, Y & Z), Circular Interpolation with 2 Axes out of 3 (X,Y &Z), NC Program Memory 64kB, Serial interface RS 232 C at the control Panel, Calculation & Compensation of Dressing Amounts, Automatic travel into home position, Feed rate override for all NC-Axes, Inch input system, 9.5" LCD Monitor, Monochrome, Information in clear text, Programmable operation range limits, Battery Back-up for machine cycles and parameters, Free-standing movable control panel in front of machine, Portable impulse generator to facilitate machine set-up, Standard Equipment, Totally enclosed illuminated work area, Coolant nozzle at right side of the wheel head, (1) Grinding wheel guard for grinding wheels Max. Diameter 20"x8", (1) Grinding wheel flange, for wheels diameter 20", Bore 8", Clamping width 2"-8", (1) Set of Leveling pads, Electrical installation for 400 volts, 60 cycles, control voltage 24 volts, Equipped With, Switch to permit grinding wheel circumferential (cutting) speed higher than 45 m/s. The key-switch as per item 8213004 permits a circumferential speed of grinding wheel up to 45 m/s. By use of the key-switch item 8213008 additionally, the range is extended for higher speeds than 45 m/s. The maximum required circumferential cutting speed has to be stated., Mechanical & electrical preparation for installation of profile dressing attachments on the machine table consisting of necessary electrical units, cable connection and 2 plugs. One contour dressing attachment PEA-TLR40 with two drive motors or one profile dressing attachment PEA-TL/R 100/150/200 can be connected. Direction of rotation of drive motors selectable via control panel or program., Return pump station for machine PROFIMAT MC, for returning dirty water to coolant filtration plant, consisting of 1 No. torque-flow pump featuring a mechanical seal, free from wear, and protection against dry running. Scope of supply also includes pipe connection between machine's coolant water exit channel and pump, as well as between pump and dirty water tank of coolant filtration plant. Operating voltage 400 volts, 50/60 cycles., Extractor fitting degree 200mm for an emulsion mist exhaust system., Three-phase transformer for machine Profimat with grinding spindle drive up to 80 HP and coolant unit. Built-in separate cabinet. Primary voltage 480 V +/- 10% 50/60 Hz. In case of major voltage fluctuation, voltage stabilizers are required., Chiller for electrical cabinet, to be used at an ambient temperature exceeding 95 deg F (Max 113 deg F), Automatic Compensation coolant Nozzles for right hand side of wheel head to maintain constant position in relation to the grinding wheel. Nozzle position compensates at dress., Grinding Cycle L951 Radius grinding convex or concave in creep-feed mode, up-cut or down cut grinding., Grinding Cycle L952 Radius grinding in creep feed mode CD, Wheel head mounted diamond profile roll dressing attachment for utilizing the machine with continuous dress creep feed grinding., Feed system recirculating ball screw, Drive system (infeed of roll) A.C. Servo Motor, Speed (infeed of roll) 0.04-40 IPM, Distance grinding spindle center to diamond roll center 6.25"-11.25", Position Measurement Linear glass measuring scale, Input/output resolution 0.000050", Diamond roll arbor bearing precision roller bearing/outboard support, Diamond roll arbor exchangeable, together w/diamond roll permanently installed, Diamond roll drive A.C. drive, 12 HP, Speed of diamond roll Max. 6000 RPM, Profile width of diamond roll Max. 200 mm with recessed grinding wheels, O.D. Diamond Roll Max. 6.00", Bore 35mm, Coolant supply from one side only, Location: Prospect Heights, IL

Blohm Profimat MC607 CNC Creepfeed Profile Grinder, Specifications, Column Travel longitudinal, Max. X-Axis 27.5", Column Speed, Electro-mechanical 0.98-984 IPM, Cross Travel, Automatic Max. Z-Axis 13", Wheel head infeed, Automatic minimum 0.000050", Wheel head travel Vertical Y-Axis 21.5", Grinding Spindle drive, A.C 80 HP from 1500 RPM, Grinding Wheel width, Max. With ganged wheels 20"x8"x8", Floor Space required 6.6'x13'x8.5', Machine weight approx. 15,000 lbs., X-Axis (Machine Column - Longitudinal Traverse), Guide-ways preloaded anti-friction guideway, Feed System Recirculating Ball Screw, Drive System A.C. Servo Motor, Speed 0.98 - 984 IPM, Position measurements Direct Encoder, Input/output resolution 0.000050", Y-Axis (Grinding Wheel Head-Vertical Traverse), Guideways Preloaded antifriction guideway, Feed system Recirculating ball screw, Drive System A.C. Servo Motor, Speed 0.16-148 IPM, Position Measurements Linear glass measuring scale, Input/output resolution 0.000050", Z-Axis (Cross Traverse), Guideways Preloaded antifriction guideway, Feed system Recirculating ball screw, Drive System A.C. Servo Motor, Speed 0.16- 157 IPM, Position Measurements Linear Glass Measuring Scale, Input/output resolution 0.000050", C-Axis (Grinding Spindle Drive) 80 HP from 1500 RPM, Grinding Spindle Speed Infinitely variable in a range of 45-7000 RPM, Drive Direct via Flexible Coupling, Grinding Spindle high precision cartridge-type spindle, diameter 5.5", Lubrication Pregreased and sealed for life, Machine Control, GE Fanuc 18i with Integrated PLC for machine axes (X, Y and Z), Grinding Cycles, L 936 Plunge cut grinding, with manual feed, L 935 Surface grinding, manual with continuous cross feed, L 933 Plunge cut grinding, with intermittent down feed and sparking out, L 934 Surface grinding, with intermittent down feed and sparking out, L 993 Jog to operation range limits, L 994 Jog to loading position, L 930 Creep feed grinding, Dressing Cycles, L 941 Dressing w/single point diamond form machine table, Linear Interpolation with 3 axes out of 3 (X, Y & Z), Circular Interpolation with 2 Axes out of 3 (X,Y &Z), NC Program Memory 64kB, Serial interface RS 232 C at the control Panel, Calculation & Compensation of Dressing Amounts, Automatic travel into home position, Feed rate override for all NC-Axes, Inch input system, 9.5" LCD Monitor, Monochrome, Information in clear text, Programmable operation range limits, Battery Back-up for machine cycles and parameters, Free-standing movable control panel in front of machine, Portable impulse generator to facilitate machine set-up, Standard Equipment, Totally enclosed illuminated work area, Coolant nozzle at right side of the wheel head, (1) Grinding wheel guard for grinding wheels Max. Diameter 20"x8", (1) Grinding wheel flange, for wheels diameter 20", Bore 8", Clamping width 2"-8", (1) Set of Leveling pads, Electrical installation for 400 volts, 60 cycles, control voltage 24 volts, Equipped With, Switch to permit grinding wheel circumferential (cutting) speed higher than 45 m/s. The key-switch as per item 8213004 permits a circumferential speed of grinding wheel up to 45 m/s. By use of the key-switch item 8213008 additionally, the range is extended for higher speeds than 45 m/s. The maximum required circumferential cutting speed has to be stated., Mechanical & electrical preparation for installation of profile dressing attachments on the machine table consisting of necessary electrical units, cable connection and 2 plugs. One contour dressing attachment PEA-TLR40 with two drive motors or one profile dressing attachment PEA-TL/R 100/150/200 can be connected. Direction of rotation of drive motors selectable via control panel or program., Return pump station for machine PROFIMAT MC, for returning dirty water to coolant filtration plant, consisting of 1 No. torque-flow pump featuring a mechanical seal, free from wear, and protection against dry running. Scope of supply also includes pipe connection between machine's coolant water exit channel and pump, as well as between pump and dirty water tank of coolant filtration plant. Operating voltage 400 volts, 50/60 cycles., Extractor fitting degree 200mm for an emulsion mist exhaust system., Three-phase transformer for machine Profimat with grinding spindle drive up to 80 HP and coolant unit. Built-in separate cabinet. Primary voltage 480 V +/- 10% 50/60 Hz. In case of major voltage fluctuation, voltage stabilizers are required., Chiller for electrical cabinet, to be used at an ambient temperature exceeding 95 deg F (Max 113 deg F), Automatic Compensation coolant Nozzles for right hand side of wheel head to maintain constant position in relation to the grinding wheel. Nozzle position compensates at dress., Grinding Cycle L951 Radius grinding convex or concave in creep-feed mode, up-cut or down cut grinding., Grinding Cycle L952 Radius grinding in creep feed mode CD, Wheel head mounted diamond profile roll dressing attachment for utilizing the machine with continuous dress creep feed grinding., Feed system recirculating ball screw, Drive system (infeed of roll) A.C. Servo Motor, Speed (infeed of roll) 0.04-40 IPM, Distance grinding spindle center to diamond roll center 6.25"-11.25", Position Measurement Linear glass measuring scale, Input/output resolution 0.000050", Diamond roll arbor bearing precision roller bearing/outboard support, Diamond roll arbor exchangeable, together w/diamond roll permanently installed, Diamond roll drive A.C. drive, 12 HP, Speed of diamond roll Max. 6000 RPM, Profile width of diamond roll Max. 200 mm with recessed grinding wheels, O.D. Diamond Roll Max. 6.00", Bore 35mm, Coolant supply from one side only, Location: Prospect Heights, IL

50 HIGH TECH CNC MACHINES ONLINE AUCTION BY CNC EXCHANGE***CONSIGNMENT SALE – Multiple Locations

Ends from
Venue Address
Assets in Multiple Locations
Prospect Heights
Illinois
60070
United States

For Premier Asset Recovery Group delivery information please telephone 312-280-1234.

Important Information

Online Only Auction

Auction Date & Time:

Online bidding opens: Wednesday, August 7th  2019 at 9:00 AM

Online Bidding Closes: Tuesday, August 20,  2019 at 11:00 AM

Inspection:  

Inspection by appointment, Contact 312-280-1234 ext. 608

Or email Maribel@premierarg.com

Location:  (see description for Location)

75 E Palatine Road, Prospect Heights, IL 60070 

 

 

  • BidSpotter Customer Service Support Department 

    Have a question pertaining to the bidding process? 

    Visit our Frequently Asked Questions!  

    You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

    Customer Support Hours:

    • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
    • Friday, 8:00 AM EST – 6:30 PM EST 

    Email: support@bidspotter.com

    Office: (253) 858-6777      Toll Free: (866) 597-2437

    Frequently Asked Questions

Terms and Conditions

 1.  IDENTIFICATION: All Participants are required to register prior to becoming an Approved Bidder.  All Participants are required to give full name, permanent street address, phone numbers, email address, valid credit card and business name.   Subsequent to registration on BidSpotter, approval to bid is at our discretion.

 

2. PAYMENT: Invoices must be paid in full by  Thursday, August 22, 2019.   Payment may be made by wire transfer, company check with a bank letter of guarantee, certified funds or cash.  A BUYERS FEE OF 18% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE.    Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS A PROPER EXEMTION.  NO MERCHANDISE WILL BE RELEASED UNITIL INVOICE IS PAID IN FULL.

3. Purchase of any lot is at the Purchaser's risk with risk of loss immediately passing to Purchaser upon the auctioneer's call. Neither Premier Asset Recovery Group, LLC, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause.

4. REMOVAL:  All purchases MUST be removed as herein listed.  Small items (Tooling, Machine Parts & Accessories, etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION.  WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE.  All other Machinery & Equipment must be removed by  Thursday, September 12, 2019.

 

5.  Purchases may be removed only on presentation of paid bill.  Removal shall be at the expense, risk and liability of the purchaser.  Auctioneer shall not be responsible for goods not removed within the time allowed.

6. CONDITION:   All Items are sold on “as is – where is”, “in place”, “with all faults” basis no conditions or warranties or representation, written or oral, is given with any lot. All statements contained in Premier Asset Recovery, LLC catalog, website, and marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described.  Description and Photos are not guaranteed.  Make yourself available e for the Inspection period.  It is the buyer’s responsibility to inspect before biding.  Premier Asset Recovery Group assumes no liability for error or omissions associated with the auction sale.  The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain the fitness or use of the assets being purchased.

7. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT.

8. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled hereto.

9. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser.

10. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.

11. CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, PROPER INSURANCE protecting  Premier Asset Recovery Group, LLC  and the people or company that the auctioneers are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for the auctioneer`s protection - NOT FOR THE PURCHASER`S therefore the auctioneer suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the equipment they may be moving for the purchaser.

12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk.


13.  It is the Purchaser’s sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items.  Certain of the items for sale may contain “hazardous substances”, as that term is defined under federal, state or local environmental laws and regulations.  Premier has no duty to remove any hazardous substances that are contained in or are a part of any items.  Purchasers agree to defend (by counsel satisfactory to Premier) and indemnify Premier and hold Premier harmless from any against any claim.  Demand, cause of action, liability or expense (including attorney’s fees and costs) asserted against or incurred by Premier in connection with the sale, removal, shipment, or use of any purchased items.


14. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision will be final and absolute.

15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.

16. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers. 

17. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.

18. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller. 

19  These terms and conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and  construed in accordance with the internal law of the State of Illinois, without regard to conflict of law’s provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of Illinois located in Cook County.

See Full Terms And Conditions