Lot

60

26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne

In 50+ SUPER HIGH END CNC MACHINE TOOLS- Multiple...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 312-280-1234 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 1 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 2 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 3 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 4 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 5 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 6 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 7 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 8 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 1 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 2 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 3 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 4 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 5 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 6 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 7 of 8
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, Ne - Image 8 of 8
Auctioneer has chosen not to publish the price of this lot
Prospect Hts, Illinois
0.00%
18.00%
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, New 2019 Specifications, MODEL 812AA-26x66-2000-W INDUSTRIAL STAINLESS STEEL CABINET WASHER, SPECIFICATIONS:, 1. This is a front load cabinet style parts washing system that is constructed of STAINLESS steel. The tank and cabinet are insulated and then cover with 16 gauge painted sheet metal., - Washer sits on a tubular beam frame with pillow block bearing pivot points for the door., 2. The swing out turntable is driven by a roller chain drive to ensure slippage should anything cause interference with the turntable drive (there are no gears, belts or tires to bind or wear). Door has a labyrinth seal., - Door interlock switch provided that shuts down system should anyone attempt to open washer door during cleaning cycles., - A 26" diameter turntable swings out as the door is opened giving 90% exposure of the turntable for operator convenience of loading and unloading., - Turntable is designed so that the 80mm diameter by 135mm long shaft fits down into the turntable and the 355.93 diameter rest of the turntable., - Turntable has a jog button to aid operator in loading or unloading of parts., 3. Turntable work envelope is 26" inside diameter by 66" working height with a load/unload height of approximately 40" from the floor., - Turntable has a load limit of 2000 pounds evenly distributed., - The turntable is open in the middle so that the stem of the fixture will fit down in the turntable., 4. Wash Stage is a recirculating Heated Wash Stage that is powered by a 15 horsepower vertical seal-less pump that produces 220 gpm at 65 psi., - The 200 gallon reservoir is heated with an 36 kW Incoloy heating elements., - There is a digital temperature controller., - There are fully adjustable stainless steel spray nozzles that are located on the top, side, and bottom of the work envelope to fully encircle the part as the turntable rotates., - There is a 7-day programmable heat timer for conservation of energy during non-washing hours., - All sprayed solution falls to sub-flooring in the cabinet that directs it to a common exit port where it cascades over easy to remove horizontal stainless steel chip screen tray (above water level) and then returns the solution back to the wash tank., - There is a liquid level control to add fresh water and a low water level control to protect the heating elements by shutting them off when low water is detected., 5. An 8x30 (trade size 2) full flow baghouse filter with fore and aft pressure gauges is mounted on the discharge side of the wash pump to collect fine debris from solution before entering the spray nozzles with a pressure switch to indicate to operator when a baghouse filter needs to be changed., 6. A 3 horsepower combination exhaust fan and demister that will collect steam vapor, condense it back to water droplets and deposit the water back to the reservoir, add $3,360.00. Note this option eliminate the need to vent from building, 7. Electrical controls are relay logic with standard AEC components being used., 8. Emergency stop button provided on control panel., 9. Digital cycle timer., 10. Fresh water inlet is 1/2" NPT (national pipe thread) and drain valve of reservoir is 1-1/2" NPT., 11. Washer measures approximately 84" high by 60" wide by 61" deep and weighs approximately 2,800 pounds empty., 12. Electrical load 480 volts, 60 cycles, 3 phase, 78 full load amps., 13. Control box is NEMA 12., 14. Controls Include: Power on/off enables heater, Digital Cycle Timer for Wash, 7-day Timer for Heat on/off, Turntable Jog Button, Emergency Stop, COST OF ABOVE WASHING SYSTEM IN STAINLESS STEEL IS $77,978.00 2019, Today's replacement cost $97,500.00., Equipped With, AEC SYSTEMS IS AVAILABLE TO QUOTE ANY MODIFICATIONS REQUIRED FOR YOUR APPLICATION, CONTACT RYAN WESTPHAL 616-257-9502 X 101,
26"x66" AEC Systems Stainless Steel Aqueous Based Cabinet Type Parts Washer, S/N NAF-2095-02-19, New 2019 Specifications, MODEL 812AA-26x66-2000-W INDUSTRIAL STAINLESS STEEL CABINET WASHER, SPECIFICATIONS:, 1. This is a front load cabinet style parts washing system that is constructed of STAINLESS steel. The tank and cabinet are insulated and then cover with 16 gauge painted sheet metal., - Washer sits on a tubular beam frame with pillow block bearing pivot points for the door., 2. The swing out turntable is driven by a roller chain drive to ensure slippage should anything cause interference with the turntable drive (there are no gears, belts or tires to bind or wear). Door has a labyrinth seal., - Door interlock switch provided that shuts down system should anyone attempt to open washer door during cleaning cycles., - A 26" diameter turntable swings out as the door is opened giving 90% exposure of the turntable for operator convenience of loading and unloading., - Turntable is designed so that the 80mm diameter by 135mm long shaft fits down into the turntable and the 355.93 diameter rest of the turntable., - Turntable has a jog button to aid operator in loading or unloading of parts., 3. Turntable work envelope is 26" inside diameter by 66" working height with a load/unload height of approximately 40" from the floor., - Turntable has a load limit of 2000 pounds evenly distributed., - The turntable is open in the middle so that the stem of the fixture will fit down in the turntable., 4. Wash Stage is a recirculating Heated Wash Stage that is powered by a 15 horsepower vertical seal-less pump that produces 220 gpm at 65 psi., - The 200 gallon reservoir is heated with an 36 kW Incoloy heating elements., - There is a digital temperature controller., - There are fully adjustable stainless steel spray nozzles that are located on the top, side, and bottom of the work envelope to fully encircle the part as the turntable rotates., - There is a 7-day programmable heat timer for conservation of energy during non-washing hours., - All sprayed solution falls to sub-flooring in the cabinet that directs it to a common exit port where it cascades over easy to remove horizontal stainless steel chip screen tray (above water level) and then returns the solution back to the wash tank., - There is a liquid level control to add fresh water and a low water level control to protect the heating elements by shutting them off when low water is detected., 5. An 8x30 (trade size 2) full flow baghouse filter with fore and aft pressure gauges is mounted on the discharge side of the wash pump to collect fine debris from solution before entering the spray nozzles with a pressure switch to indicate to operator when a baghouse filter needs to be changed., 6. A 3 horsepower combination exhaust fan and demister that will collect steam vapor, condense it back to water droplets and deposit the water back to the reservoir, add $3,360.00. Note this option eliminate the need to vent from building, 7. Electrical controls are relay logic with standard AEC components being used., 8. Emergency stop button provided on control panel., 9. Digital cycle timer., 10. Fresh water inlet is 1/2" NPT (national pipe thread) and drain valve of reservoir is 1-1/2" NPT., 11. Washer measures approximately 84" high by 60" wide by 61" deep and weighs approximately 2,800 pounds empty., 12. Electrical load 480 volts, 60 cycles, 3 phase, 78 full load amps., 13. Control box is NEMA 12., 14. Controls Include: Power on/off enables heater, Digital Cycle Timer for Wash, 7-day Timer for Heat on/off, Turntable Jog Button, Emergency Stop, COST OF ABOVE WASHING SYSTEM IN STAINLESS STEEL IS $77,978.00 2019, Today's replacement cost $97,500.00., Equipped With, AEC SYSTEMS IS AVAILABLE TO QUOTE ANY MODIFICATIONS REQUIRED FOR YOUR APPLICATION, CONTACT RYAN WESTPHAL 616-257-9502 X 101,

50+ SUPER HIGH END CNC MACHINE TOOLS- Multiple Locations

Ends from
Venue Address
Assets in multiple locations.
75 E. Palatine Road
Prospect Heights
Illinois
60070
United States
A rigging fee will be added to invoice $350.00

Important Information

Auction Date & Time: lots start closing on Wednesday, December 8th at 11:00 am CT

Preview:  

Location:  **Assets located at multiple locations.**

Payment: Invoices must be paid in full by Friday, December 10, 2021 (NO CREDIT CARDS WILL BE ACCEPTED FOR PAYMENT)

Removal:  All purchases MUST be removed as herein listed.  Small items (Tooling, Machine Parts & Accessories, etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION.  WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE.  All other Machinery & Equipment must be removed by 

18% Buyers Premium applies on all online purchases. 

 

=========================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

Terms and Conditions

  1. IDENTIFICATION: All Participants are required to register prior to becoming an Approved Bidder.  All Participants are required to give full name, permanent street address, phone numbers, email address, valid credit card and business name.   Subsequent to registration on BidSpotter, approval to bid is at our discretion.

a. DEPOSITS: INTERNATIONAL BUYERS may be asked to submit a refundable deposit.

 2. PAYMENT: Invoices must be paid in full by Friday, December 10, 2021.   Payment may be made by wire transfer, company check with a bank letter of guarantee, certified funds or cash. (No Credit Cards are accepted)   A BUYERS FEE OF 18% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE.    Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS A PROPER EXEMTION.  NO MERCHANDISE WILL BE RELEASED UNITIL INVOICE IS PAID IN FULL.

3. Purchase of any lot is at the Purchaser's risk with risk of loss immediately passing to Purchaser upon the auctioneer's call. Neither Premier Asset Recovery Group, LLC, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause.

4. REMOVAL:  All purchases MUST be removed as herein listed.  Small items (Tooling, Machine Parts & Accessories, etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION.  WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE.  All other Machinery & Equipment must be removed by December 28, 2021.

 5.  Purchases may be removed only on presentation of paid bill.  Removal shall be at the expense, risk and liability of the purchaser.  Auctioneer shall not be responsible for goods not removed within the time allowed.

6. CONDITION:   All Items are sold on “as is – where is”, “in place”, “with all faults” basis no conditions or warranties or representation, written or oral, is given with any lot. All statements contained in Premier Asset Recovery, LLC catalog, website, and marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described.  Description and Photos are not guaranteed. 

It is the buyer’s responsibility to inspect before biding.  Premier Asset Recovery Group assumes no liability for error or omissions associated with the auction sale.  The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain the fitness or use of the assets being purchased.

7. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT.

8. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled hereto.

9. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser.

10. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.

11. CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, PROPER INSURANCE protecting  Premier Asset Recovery Group, LLC  and the people or company that the auctioneers are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for the auctioneer`s protection - NOT FOR THE PURCHASER`S therefore the auctioneer suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the equipment they may be moving for the purchaser.

12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk.


13.  It is the Purchaser’s sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items.  Certain of the items for sale may contain “hazardous substances”, as that term is defined under federal, state or local environmental laws and regulations.  Premier has no duty to remove any hazardous substances that are contained in or are a part of any items.  Purchasers agree to defend (by counsel satisfactory to Premier) and indemnify Premier and hold Premier harmless from any against any claim.  Demand, cause of action, liability or expense (including attorney’s fees and costs) asserted against or incurred by Premier in connection with the sale, removal, shipment, or use of any purchased items.


14. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision will be final and absolute.

15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.

16. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers. 

17. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.

18. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller.   This Auction Company has requested and been granted access to see all bids placed including any maximum pre-bids.  This auction is permitted to engage in this activity by providing this clear disclosure to you, the bidder.

19  These terms and conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and  construed in accordance with the internal law of the State of Illinois, without regard to conflict of law’s provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of Illinois located in Cook County.

 

See Full Terms And Conditions