Inspection Day(s): When: February 3rd from 12:00 Noon to 4:30PM & February 4th from 9:00AM to 1:00PM Where: Warehouse located at: Sewell Motor Exp...

12" Promeco Single Screw Extruder, Model PE300, Electrically Heated Barrel, approximately 168" Barrel, Top Feed Section, Side Opening, with 192 kw...

12" Promeco Single Screw Extruder, Model PE300, Electrically Heated Barrel, approximately 168" Barrel, Top Feed Section, Side Opening, with 192 kw...

12" Promeco Single Screw Extruder, Model PE300, Electrically Heated Barrel, approximately 168" Barrel, Top Feed Section, Side Opening, with 192 kw...

CDS Model CBH60-BV, 8" Belt Puller, approximately 8" wide x 60" long contact, smooth belt, 460v, S/N34405 130217 (Ref: 148015)

CDS Traveling Cut Off Saw, Model CSS 6.5-13, Up acting blade, Servo Traveling Table, Top hold down, 460v, S/N370907 (Ref: 148016)

CDS Traveling Cut Off Saw, Model CSS 8.5-18, Up acting blade, Servo Traveling Table, Top hold down, 460v, S/N120805 (Ref: 148017)

Blaster Drill with Alan Bradley Panelview 400 Controller (Ref: 148018)

42" Pallet Rotator and Positioner, on Casters (Ref: 148019)

42" Pallet Rotator and Positioner (Ref: 148020)

Fumex Model FA2PVC Fume Extractor, Stainless Steel Housing, 120-230v, S/N 47198203 (Ref: 148021)

Cincinnati Milacron Model CM92 HP Extruder, 92mm Conical Twin Screw Extruder, 460v, S/N E15A0298015, (1998) (Ref: 148022) ...[more]

Schenck AccuRate Model MODMC-1G-2A Dust Feeder, Stainless Steel, S/N 125430-04A-MECGM, (2008) (Ref: 148023) ...[more]

Wintek Decker Filter Skid, KP Pot Duplex Unit, model W8ss filters, S/N 34373, (2020) (Ref: 148024)

2" Davis Standard Extruder, Model DS-2, Ratio 24:1 L/D, Electrically Heated, Air Cooled, 20 HP AC Motor (Ref: 148025)

CDS Vacuum Calibration Tank, Model CVSS 14-30, 8" x 8" x 15' Plastic Vacuum Section, 14" x 14" x 15' Cooling Section with pumps and filters, 480v,...

Promeco Model KR2600 Single Shaft Shredder, 2600mm (102" wide) Rotor, Ram Feeder, Hydraulically Driven with 350 HP, 460v Hydraulic Power Pack, Fee...

Wintek Decker Filter Skid, KP Pot Duplex Unit, model W8ss filters, S/N 35308, (2020) (Ref: 148028)

Cincinnati Milacron Model CM92 HP Extruder, 92mm Conical Twin Screw Extruder, DC motor, NOTE: Missing Barrel and Screws, S/N EI50A0299002, (1999) ...

Cincinnati Milacron Model CM80 Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/N E54A0196016 (1996) (Ref: 148030)

Cincinnati Milacron Model E-80 Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/N E54A03000072, (2001) (Ref: 148031)

Cincinnati Milacron Model TC80 HP Extruder, 80mm Conical Twin Screw Extruder, NOTE: Missing Motor, S/N E54A0300104, (2007) (Ref: 148032)

Cincinnati Milacron Model TC80 HP Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/NE54A0300092, (2011) (Ref: 148033)

Cincinnati Milacron Model TC80 HP Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/N E54A0300070, (2001) (Ref: 148034)

Cincinnati Milacron Model TC80 HP Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/N E54A0300079, (2004) (Ref: 148035)

Cincinnati Milacron Model TC80 Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/N E54TCAC20001, (2012) (Ref: 148036)

2" Davis Standard Extruder, Model DS-20, 20 HP DC Motor, 460v, NOTE: Missing Gearbox and misc. components (Ref: 148037)

Eagle MFG Dual Lane Servo Up Cut Saw, S/N TT-5494A. (Ref: 148038)

Video Jet Laser Coder (Ref: 148039) ...[more]

CDS Model CCH60-8L, 8" Puller, Cleated Belt, 8" wide x 60" long contact, 1-20 FPM, S/N 400107. (Ref: 148040)

ESI Model 10FT Spray Tank, Cooling Tank, Stainless Steel, 18" wide x 17" high with pump and filter, S/N 1524310. (Ref: 148041)

ESI Model SERVO BOOS SAW RETROFIT, 240v, S/N1222340. (Ref: 148042)

Cincinnati Milacron Model CM-80 HP Extruder, 80mm Conical Twin Screw Extruder, NOTE: Missing Motor, S/N 4254 A01/94-27. (Ref: 148043) ...[more]

Extrunet America Saw Used (Ref: 148044)

Extrunet America Puller Used, Cleated belt (Ref: 148045)

15' CDS Spray Cooling Tank, Stainless Steel, 20" wide x 14" deep (Ref: 148046)

Extrusion Services Embosser CTQ, 18" wide (Ref: 148047)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-5A (Ref: 148048)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-11B (Ref: 148049)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-14B (Ref: 148050)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-4B (Ref: 148051)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-20A (Ref: 148052)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-22A (Ref: 148053)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-24B (Ref: 148054)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-23A (Ref: 148055)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-25B (Ref: 148056)

Sesotec Type C-SCAN DLS 1480/1200/800 PP UL, Metal Detector, 58" wide x 21" high opening, mounted on 46" wide x 15' long belt conveyor, S/N 100265...

Promeco Model NT 02 35 Ft. Belt Conveyor, 46" wide, Cleated Belt, S/N PCB 12 18 03, (2018) (Ref: 148058) This lot is being offered for sale subjec...

Promeco Model NT 01, 30 Ft. Belt Conveyor, 55" wide, smooth belt, S/N PCB141802, (2018) (Ref: 148059) This lot is being offered for sale subject t...

Pioneer Systems Model HD-64, Gaylord Box Dumper, approximately 22' wide, S/N 19106D. (Ref: 148060)

CDS Model CCH 96-10Q, Belt Puller, 10" wide x 96" contact, Cleated Belt, 3-40 FPM, S/N 010805 (Ref: 148061)

CDS Traveling Cut Off Saw, Model CSS 6.5-18, Up acting blade, Servo Traveling Table, Top hold down, 460v, S/N40707 (Ref: 148062)

TS MFG Inclined Feeder, S/N 24214 (Ref: 148063) ...[more]

Conair Model PC8-84, Puller, Cleated Belt, 8" wide x 84" long contact, 460v, S/N 206156303262 (Ref: 148064)

Conair Model PC8-84, Puller, Cleated Belt, 8" wide x 84" long contact, 460v, S/N 206156303263 (Ref: 148065)

Extrusion Services Embosser Conveyor, 480v, S/N 1423941 (Ref: 148066)

2.5" Davis Standard Model 25IN, 2-1/2" Extruder, Electrically Heated, Air Cooled Barrel, Thermatic Gearbox, 40 HP Motor (Ref: 148067)

Extrusion Services, Radiant Heater, 480v, S/N 1827920 (Ref: 148068)

Davis Standard Model S B 200, 2" Extruder, 24:1 L/D, Electrically Heated, Air Cooled Barrel, S/N B0541, SO# 84277, (2007) (Ref: 148069)

CDS Model CCH60-8V, 8" Belt Puller, Cleated Belt, 8" wide x 80" long contact, S/N 370707 (Ref: 148070)