The CRM Sector Matic range of multiblade slicers can, in a single, four-second cycle, cut an entire piece of meat into slices of equal width, elim...

OHI dual shaft paddle blender (3) CO2 injectors on top; hydraulic drive with hydraulic power pack underneath. The blender measures 72"L x 48"W x 2...

Wolfking single shaft mixer with 38" diameter ribbon and paddles. The inside tub measurements are: 76"L x 39"W x 48"D, giving it approximately 72 ...

FORMAX PFM-26 WITH TENDERFORM Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cos...

The Ultravac 880 vacuum chamber packaging machine has been designed for economical, single operator efficiency in a daily use environment where op...

Jacketed 80G capacity mixing tank with agitation rated at 100PSIG at 338 degrees F, manufactured in 2012.. It includes a Waukesha/SPX model 064 U1...

Lift and load for frozen blocks into grinder. The bed measures 27" wide by 22" deep and loads at 34" high with 69" high turnout for loading. The u...

Waukesha Universal II series positive displacement pump, rectangular infeed. This pump is designed to pump "unpumpable" products, such as dough, m...

The Lyco rinser/quenching tank is 10' long after which it inclines for another 5' to dump at 64" high. It loads at 23" off the ground. The belt is...

Grote's SNP-505 Slicer is ideal for single lane targeting applications, such as sandwich lines. It slices and applies product slices directly onto...

Wire mesh belt. Configured for Overflow as well as submerged batter application Suitable for batter as well as light tempura coatings Includes con...

ALC-3?135 SSS 6.4KW Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this ...

Single piston filler equiped with stainless steel removable round connical hopper, pneumatic operation with single foot pedal. Site management and...

Dicer and slice adjustment from 2mm to 20mm first cut. Max product the infeed can accomidate is 3.5". 460 Volt, 3 Phase, 60Hz. Site management ...

Moble high pressure skid with LEWA 3-Stage High Pressure Pump Type LDB3, Endress+Hauser Flow Meter PROMASS 83, Stainless steel electrical cabinet ...

Piston size 6" x 10" L Approximitaly 1 Gallon Cap. Equiped with square product holding hopper, 29" l X 20" Deep with 4" Sanitary Outlet. Mounted...

Steam controls including pneumatic steam control valve. Plumbing includes regulator pressure control valves and Watlow digital temp controls. Mou...

Turn table is 65" Dia., mast 119" tall from base to top of wrapper. Mild Steel painted construction. 120 Volt, 1 Phase. NOTE Some missing Covers o...

Stainless Steel 2-Door Blast Freezer Model # BFIS-2D-s7, Has 2 compressors 208 Volt, 3 Phase, 60 Hz. Site management and loading fee for this ite...

Stainless Steel 2-Door Blast Freezer Model # BFIS-2D-S7, Has 2 Compressors 208 Volt, 3 Phase, 60 Hz. Site management and loading fee for this item...

Continuous Alginate casing machine from Reiser Vemag. Model C-CC215, Serial 2150157, NEW 2018, Missing Horn and Feed Belts Site management and loa...

Check Weigher not complete Model # CK6000 WEIGH CHECK Serial # 1IS1209-7461, Weight Range 5-10 Gallons Site management and loading fee for this i...

Ink Coder Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this item is $ 7...

Misc, Paste Pump Parts Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for thi...

Model HA-125 Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this item is...

Model # LD16A/SB, Top tape mag. Site management and loading fee for this item will be added to your invoice at the closure of the auction. The c...

Model # LD16A/SB, Top tape mag. Site management and loading fee for this item will be added to your invoice at the closure of the auction. The c...

Incline Conveyor with Modular belt and 3" Flights, 100" L X 12" Wide, 37" Infeed Height , 63" at discharge. Site management and loading fee for th...

Model RA3-12-K122, Serial # RA-675077, Inside Screen is .06", Outside Screen is .25" Site management and loading fee for this item will be added t...

Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this item is $ 75 ...[mor...

Can accumulator with laneing conveyor, tray former, tray packer with film feeder, tray wrapper, shrink tunnel, Currently set for 8oz can 24 pack 6...

Model # RSV10K64024, Dual Ribbon, Dual End Discharge, Steam Jackted, On Stainless Steel Costers Site management and loading fee for this item will...

Seal Max CTS-258XL Induction Cup Sealer. 120 Volt, set up for 4" cups. Site management and loading fee for this item will be added to your invoice...

Pillar Induction Sealer Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for th...

4" Round Tub Induction Sealer, Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost...

Metler Toledo Powered Case Conveyor, 460 Volt Site management and loading fee for this item will be added to your invoice at the closure of the au...

Hobart Table Top Bowl Chopper Parts Only Not complete Site management and loading fee for this item will be added to your invoice at the closure o...

Stainless Steel Square Holding Tank, Capacity is 435 Gallons Site management and loading fee for this item will be added to your invoice at the cl...

Stainless Steel Holding Tank Holding Capacity is 425 Gallons Site management and loading fee for this item will be added to your invoice at the cl...

8' L X 2" Dia. 12 tubes in rack mouned on common skid with casters and stainless steel enclosure, 2" sanitary fittingsan infeed and discharge. Sit...

Linker rack Model 220-16, For Hatmanm Link Stuffer Site management and loading fee for this item will be added to your invoice at the closure of t...

Metal Detector with Reject conveyor, 18.5" W X 1.5" T Apetature. 12" Wide belt, belt is missing. Frame is Stainless Steel. Site management and loa...

Hopper Size: 44" Wide X 54" T, Pivot point is 9' off the ground, No Hydraulic Power Pack Included Site management and loading fee for this item wi...

Two Channel Shaker Pan last used as discharge shaker for Key Tegra 7775 color sorters. Overall Pan dimentions are 120" L X 24" Wide. Channel A is ...

Two Channel Shaker Pan last used as discharge shaker for Key Tegra 7775 color sorters. Overall Pan dimentions are 120" L X 24" Wide. Channel A is ...

Two Channel Shaker Pan last used as discharge shaker for Key Tegra 7775 color sorters. Overall Pan dimentions are 120" L X 24" Wide. Channel A is ...

Stainless Steel Hemispherical Kettle with High side Wall, 300 Gallon Capacity, Model INA-300-SP, NAB # 42564, 45 Psi. @ 300 Degrees. No agitation....

Model 7000 Peeler Scrubber, 7 Rolls, Hydraulic driven, No power Pack Included. Site management and loading fee for this item will be added to your...

1,ooo Capacity Stainless Steel Insulated Holding Tank With Agitation. Tank has dents on side wall. Site management and loading fee for this item w...

Morrison Timeing Screw Co. #10 Can Crusher, Hydraulic Powered. Site management and loading fee for this item will be added to your invoice at the ...

20Amp, 250V, 3 Phase Plug, 24"L X 16"W X 20"D Site management and loading fee for this item will be added to your invoice at the closure of the au...

MN: 2000S, 110V, 3.15ams Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for t...

2 Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this item is $75

120V Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this item is $ 35

Stainless Steel, 4" Griner Plates 31"L X 23"W X 28"D, 20Amp, 250V, 3Phase Plug Site management and loading fee for this item will be added to your...

MN: UV3000, ITEM #: 904002-009, SEIRS F, MFG: 2003, SN: 1005, 575/ 60HZ, 3 PHASE, 25AMPS, Chamber is Approx. 36" X 42"x 8"T Site management and lo...

MN: SPR465L, SN: T1120873, MFG: 2016, 60LB, 80PSI Site management and loading fee for this item will be added to your invoice at the closure of th...

Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this item is $ 25 ...[mor...

Job #: 07-50072, 48"L X 24"Diam. Site management and loading fee for this item will be added to your invoice at the closure of the auction. The c...

Site management and loading fee for this item will be added to your invoice at the closure of the auction. The cost for this item is $ 25 ...[mor...