Lot

1

Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven

In Diemco Ceiling Tile Flat Line Paint System Auc...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 330-325-9000 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 1 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 2 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 3 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 4 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 5 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 6 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 7 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 8 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 9 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 10 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 11 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 12 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 13 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 14 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 15 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 16 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 1 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 2 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 3 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 4 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 5 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 6 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 7 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 8 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 9 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 10 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 11 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 12 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 13 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 14 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 15 of 16
Diemco Ceiling Tile Flat Line Finishing System with Belt and Oven - Image 16 of 16
200 USD
La Crosse, Wisconsin
7.90%
18.00%

FLATLINE COMPONENT DESCRIPTION:

A. Variable Speed Booth Roller Conveyor

66" Overall width conveyor x 19'6" long

1-1/2 HP drive motor with Inverter speed control

54” Wide, 2" diameter rolls on 9” centers

0 fpm — 15 fpm operating speed range, design speed 2.5 fpm

Powder coated steel framework

 

B. DVLE-66 Heavy Duty Electric Reciprocator

66” Stroke heavy duty electric reciprocator

Powder coated steel structural steel support framework

Gun bar position interface

Gun bar angling unit

Reciprocator auto start/stop

Severe duty electronic limits package

UCS-1000-16 automatic gun triggering system

60” Light Curtain w/3/8" Resolution

 

C. Stainless Steel Semi-Downdraft Spray Booth

Totally enclosed spray booth, inside dimensions 8’H x 8’W x 10'6”D

Overall depth ------------------- 12'7"

Overall width ---------- -

Overall height -------------------- 9’2”

7200 CFM 24" diameter heavy duty fan, 1-1/2 HP exhaust motor

Precision flanged and punched 18 gauge SS panels

Visible manometer draft gauge indicates filter load condition

Filtered roof panels with (2] four-foot light fixtures

Observation windows in front doors

Manual operator access door with window behind conveyor

[2] 4-Bulb fluorescent light fixtures, class 1 division 2

Booth mounted air control panel including

  • [4] Manual/Off/Auto gun selector switches
  • [4] Atomizing air regulator gauges
  • [4] Fan width adjustment air regulator gauges
  • [4] Fluid pressure air regulator gauges
  • [1] Manual/Off/Auto fluid dump valve switch

D. Pre-Plumbed Application Equipment Package:

  • [4] Graco Air Pro compliant low pressure spray guns
  • [4] Graco diaphragm pumps (3 colors and 1 water flush)
  • [3] Graco 5-gallon SS lids w/agitators (3 colors)
  • [4] Graco SS 5-gallon pickup tubes (3 colors, 1 water)
  • [3] Graco SS back pressure recirculation regulators (3 colors)
  • [3] Graco SS fluid regulators (3 colors)
  • [1] Deimco powder coated and pre-plumbed pump stand
  • [1] LOT Nylon fluid hose from pumps to color change valve
  • [1] LOT FEP (Teflon) coated fluid hose from color valve to guns
  • [1] LOT SS fluid fittings

 

E. 5’ Wide x 12’ Long Non-Solvent Rated Cure Oven

Oven fully erected and tested prior to shipment

18 gauge galvanized steel flanged exterior panel construction

IR Panels Totaling 30kW, 460V, 37.5 Amps) - Panels are mounted horizontally

above the conveyor. Emitter height is pre-set but is adjustable from the

exterior of the oven.

Oven has a broad operating temp range. The oven is controllable by [2] zones with

[2] SCRs. Zones can be selectively turned off or on, the wavelength of

each zone (emitter intensity) set, the convection effect circulation fan RPM

and the product throughput rates are finitely adjusted at the operator HMl.

4—min residence time is provided at the oven conveyor design speed of 2.5 fpm.

5,000 CFM recirculation fan with 3 HP variable frequency drive.

12" diameter tube-axial 1,400 CFM exhaust fan. Air ingress will be pulled from

ambient plant air through the conveyor openings on the oven infeed and outfeed.

Thermocouple over-temp interlock

Oven fully complies with NFPA 86, Class A oven regulations

 

F. Forced Air Cool Down Fans

Powder coated steel framework

System clear spans oven conveyor

[2] Heavy duty 24" diameter 5750 CFM fans with ‘/2 HP 3 phase motors

 

G. Pre-Wired Main Electrical Enclosure Includes:

Main enclosure will be UL listed (UL 508A).

Main Enclosure includes:

Multi-door Hoffman enclosure with control transformer. The transformer is fused

per UL 508A standards. A flange mounted power disconnect is provided. The

enclosure will either be enamel or epoxy powder coated. The enclosure does not have a

cooling unit. Main enclosure will be pre-mounted and pre-wired by Deimco to the side of the

oven.

Main electrical enclosure houses the Allen-Bradley Compactlogix PLC and CMore

color operator HMI screen. Both the PLC and HMI are Ethernet compatible. The

PLC and HMI may be assigned a subnet mask, gateway and IP addresses by ISI so

with permission, Deimco could access the system for remote trouble shooting.

All VFDs quoted herein are Allen-Bradley Powerflex drives.

Enclosure houses all motor starter, fuse blocks, overloads and inverters.

FLATLINE COMPONENT DESCRIPTION:

A. Variable Speed Booth Roller Conveyor

66" Overall width conveyor x 19'6" long

1-1/2 HP drive motor with Inverter speed control

54” Wide, 2" diameter rolls on 9” centers

0 fpm — 15 fpm operating speed range, design speed 2.5 fpm

Powder coated steel framework

 

B. DVLE-66 Heavy Duty Electric Reciprocator

66” Stroke heavy duty electric reciprocator

Powder coated steel structural steel support framework

Gun bar position interface

Gun bar angling unit

Reciprocator auto start/stop

Severe duty electronic limits package

UCS-1000-16 automatic gun triggering system

60” Light Curtain w/3/8" Resolution

 

C. Stainless Steel Semi-Downdraft Spray Booth

Totally enclosed spray booth, inside dimensions 8’H x 8’W x 10'6”D

Overall depth ------------------- 12'7"

Overall width ---------- -

Overall height -------------------- 9’2”

7200 CFM 24" diameter heavy duty fan, 1-1/2 HP exhaust motor

Precision flanged and punched 18 gauge SS panels

Visible manometer draft gauge indicates filter load condition

Filtered roof panels with (2] four-foot light fixtures

Observation windows in front doors

Manual operator access door with window behind conveyor

[2] 4-Bulb fluorescent light fixtures, class 1 division 2

Booth mounted air control panel including

  • [4] Manual/Off/Auto gun selector switches
  • [4] Atomizing air regulator gauges
  • [4] Fan width adjustment air regulator gauges
  • [4] Fluid pressure air regulator gauges
  • [1] Manual/Off/Auto fluid dump valve switch

D. Pre-Plumbed Application Equipment Package:

  • [4] Graco Air Pro compliant low pressure spray guns
  • [4] Graco diaphragm pumps (3 colors and 1 water flush)
  • [3] Graco 5-gallon SS lids w/agitators (3 colors)
  • [4] Graco SS 5-gallon pickup tubes (3 colors, 1 water)
  • [3] Graco SS back pressure recirculation regulators (3 colors)
  • [3] Graco SS fluid regulators (3 colors)
  • [1] Deimco powder coated and pre-plumbed pump stand
  • [1] LOT Nylon fluid hose from pumps to color change valve
  • [1] LOT FEP (Teflon) coated fluid hose from color valve to guns
  • [1] LOT SS fluid fittings

 

E. 5’ Wide x 12’ Long Non-Solvent Rated Cure Oven

Oven fully erected and tested prior to shipment

18 gauge galvanized steel flanged exterior panel construction

IR Panels Totaling 30kW, 460V, 37.5 Amps) - Panels are mounted horizontally

above the conveyor. Emitter height is pre-set but is adjustable from the

exterior of the oven.

Oven has a broad operating temp range. The oven is controllable by [2] zones with

[2] SCRs. Zones can be selectively turned off or on, the wavelength of

each zone (emitter intensity) set, the convection effect circulation fan RPM

and the product throughput rates are finitely adjusted at the operator HMl.

4—min residence time is provided at the oven conveyor design speed of 2.5 fpm.

5,000 CFM recirculation fan with 3 HP variable frequency drive.

12" diameter tube-axial 1,400 CFM exhaust fan. Air ingress will be pulled from

ambient plant air through the conveyor openings on the oven infeed and outfeed.

Thermocouple over-temp interlock

Oven fully complies with NFPA 86, Class A oven regulations

 

F. Forced Air Cool Down Fans

Powder coated steel framework

System clear spans oven conveyor

[2] Heavy duty 24" diameter 5750 CFM fans with ‘/2 HP 3 phase motors

 

G. Pre-Wired Main Electrical Enclosure Includes:

Main enclosure will be UL listed (UL 508A).

Main Enclosure includes:

Multi-door Hoffman enclosure with control transformer. The transformer is fused

per UL 508A standards. A flange mounted power disconnect is provided. The

enclosure will either be enamel or epoxy powder coated. The enclosure does not have a

cooling unit. Main enclosure will be pre-mounted and pre-wired by Deimco to the side of the

oven.

Main electrical enclosure houses the Allen-Bradley Compactlogix PLC and CMore

color operator HMI screen. Both the PLC and HMI are Ethernet compatible. The

PLC and HMI may be assigned a subnet mask, gateway and IP addresses by ISI so

with permission, Deimco could access the system for remote trouble shooting.

All VFDs quoted herein are Allen-Bradley Powerflex drives.

Enclosure houses all motor starter, fuse blocks, overloads and inverters.

Diemco Ceiling Tile Flat Line Paint System Auction

Ends from
Venue Address
3400 Losey Blvd. S.
La Crosse
.
Wisconsin
.
United States

For detainls on loading and packaging this lot for shioment please rasch out to auction@regalequipment.com or call 330-325-9000 and ask for Ben or Mike.  

Important Information

Diemco Ceiling Tile Flat Line Paint System Online Auction

ALL EQUIPMENT IS SOLD AS IS, WITHOUT WARRANTY. 

Payment:  Accepted payment are Company Check or Wire Transfer.  WE DO NOT ACCEPT CREDIT CARDS AS A FORM OF PAYMENT!! Pamment must be made to Regal Equipment no later than 11am. EST November 9, 2023.  

Removal Date: Removal will begin November, 15 2023 8am.- 3pm EST.  Last day of Removal will be November 16 by 3pm EST.  We ask that all buyers schedual a time for there items to be pickedup and loaded, this allows an efficient loading process for all.  

Packaging & Shipping/Freight Services:  For this sale we have included a Packaging Cost and Loading Fee for each item in the lot description.  For shipping and freight cost please contact auction@regalequipment.com and one of our team members will get in contact with you to provide a quote.  Freight cost can be added to the invoice prior to payment beeing made.  

Questions reguaring the auctions or spicifics about a lot please email auction@regalequipment.com or call our office at 330-325-9000 to speak with one of our team members.  

=====================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here

Customer Support Hours:

  • Monday – Friday, 8:00 AM ET – 8:00 PM ET

Email: support@bidspotter.com

Office: 253-858-6777 Toll Free: 866-597-2437

Frequently Asked Questions

Terms and Conditions

 

ALL EQUIPMENT IS SOLD AS IS, WITHOUT WARRANTY. 

TERMS AND CONDITIONS
ONLINE BUYERS PREMIUM 18%

Regal Equipment Inc. Phone # 330-325-9000 Email : auction@regalequipment.com

Ohio Auction License # 2019000089

SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND 
ALL BIDS 

*ALL EQUIPMENT SUBJECT TO PRIOR SALE


Full Payment at Termination of Sale
All Bills must be completed on Day of Sale. Funds must be recieved by August 25, 2013 11am. EST.                                                                             

 

1. Only Cash, Checks, Wire Transfers or Cashiers Checks payable to 
Regal Equipment Inc. will be accepted. No equipment will be removed from the 
sale site until payment is received in full by Regal Equipment. NO EXCEPTIONS! 

2. While descriptions are believed to be correct, the seller’s agent or 
the owners make no warranties or guarantees expressed or implied, as to the 
genuineness, authenticity of, or defect in any lot and will not be held 
responsible for advertising discrepancies or inaccuracies. Everything sold “AS IS” and 
“WHERE IS” except as expressly made in writing. No warranties are made as to the 
merchantability of any items or their fitness for any purpose.

3. Purchaser hereby agrees to defend, indemnify and hold harmless 
Seller its directors, officers, employees and other agents and representatives from 
and against any and all liabilities, judgments, claims, settlements, losses, 
damages, penalties, obligations and expenses, including attorney`s fees and 
expenses and other professional fees and expenses, incurred or suffered by such person 
arising from, by reason of, or in connection with any loss, damage or injury 
to person or property arising from, by reason of or in connection with the 
Goods sold hereunder. This indemnification shall survive delivery of the Goods to 
Purchaser and any subsequent sale or other transfer of the Goods to a 
third party.

4. It is the buyer’s responsibility to secure all equipment to meet all 
applicable government safety standards in using or removing items 
purchased. 

Loading and Managment Fee included in each purchase, cost is detailed in description of each item. Items that do not show loading and management fee contact auction@regalequipment.com for assistance.  

All Import, Export, Taxes, Packaging, Rigging & Transportation fees are the 
buyer`s responsibility. Regal Equipment will provide our customary invoice.  

5. Sales Tax will be added to the purchase of all taxable items. 
Dealers who purchase for resale must file their resale permit numbers. If sales tax is not 
collected at the time of sale and is deemed needed to be paid at a later 
date, buyer agrees to pay all required taxes.

6. Purchaser does hereby indemnify and hold harmless auctioneer and 
seller from any and all damages, claims or liabilities from injuries to persons or 
property of any type whatsoever caused during the sale or by the removal of 
items purchased.


7. In the event the purchaser fails to pay the whole of the purchase 
within the time set forth by the auctioneers and/or fails to comply with any of the 
conditions or terms of sale, the seller may retain and/or recover the deposit 
specified as liquidated damages and, in addition thereto, items that are not 
paid for can be resold at public or private sale without further notice. Any 
deficiency resulting from such resale shall be paid to the auctioneers by the defaulting 
purchaser together with all charges, fees, and expenses incurred by such 
resale and enforcement of the obligation hereunder.

8. The Bidder becomes solely responsible for all items purchased by him 
immediately following his winning bid at the auction. Therefore, he is 
advised to further guard and insure his items at his own discretion.

9. Items must be removed from the premises within the removal time 
announced at the sale. No item can, on any account, be removed before 
termination of the sale. Removal shall be at the expense, risk and liability of 
the purchaser. Auctioneers shall not be responsible for items not removed 
within the time allowed. If equipment is not removed within specified removal time, 
purchaser shall be liable for any moving and storage costs incurred and, if 
not so removed, the items shall be deemed abandoned.

10. If any shortage exists on estimated counts, an adjustment will be 
made if claims are made at time of removal. No adjustment will be allowed after 
items are removed from the premises.

11. Technology Disclaimer: Auctioneer does not warrant that the 
functions, features or content contained in the website, including any third-party 
software, products or other materials used in connection with the website, will be 
timely, secure, uninterrupted or error-free, or that defects will be corrected.

12. If any dispute arises between two or more bidders, the seller’s agent 
may or may not put the lot up again at once, and resell. 

13. The seller’s agent, when acting as agent only, is not responsible for 
acts of its principals.

14.  Online bidders will pay a buyers premium of 18%. Seller reserves the right to accept or reject 
any and all bids. 

15. By accepting a sale listing catalog and signing this form the buyer agrees 
to these terms and any announced terms at the sale.

16. CREDIT CARD IS REQUIRED FOR REGISTRATION BUT IS NOT ACCEPTED AS A PAYMENT METHOD FOR THE SALE.

17. PAYMENTS: REGAL EQUIPMENT MUST RECIEVE THE TOTAL PURCHASE PRICE NO LATER THAN August, 25 @ 11am EST. HOURS FROM RECEIPT OF INVOICE. All payments must be made to Regal Equipment, Inc. via overnight cashier's or certified check, wire transfer of immediate available funds or a corporate accompanied with a Bank Letter of Guarantee, and all of the foregoing must be in form, scope and substance acceptable to Regal Equipment, Inc. in its sole discretion. CREDIT CARDS ARE NOT AN ACCEPTABLE FORM OF PAYMENT.  

18. Removal: At Landlord's request, removal to be conducted exclusively by Regal Equipment Inc. Approved Contractors.

See Full Terms And Conditions