(Located in Toronto, Canada) Fulton FB-E Electric Boiler + Feedwater Tank + Blowdown Tank

(Located in Toronto, Canada) Fulton FB-E Electric Boiler + Feedwater Tank + Blowdown Tank
8.4 BHP (84 kW, @ 286,546btu/hr)
600 volt, 81 Amps – Control circuit transformer with feedwater pump starter
Fulton HTL 30 Feedwater Tank with Simplex Pump
Reconditioned ASME 18in Blowdown tank – Cooling Kit
Water Treatment Package – Automated water softener – 2 chemical metering pumps, dosing timer and chemical injection quill
One (1) Fulton FB-E 84 having an equivalent maximum output capacity of 289 lbs/hr of dry saturated steam from and at 212deg F. The boiler will be constructed to the latest requirements of the ASME Code; will be National Boarded, Canadian Registered and CSA certified. The boiler will be factory assembled, insulated, wired, tested and painted prior to shipment. The boiler will carry a design pressure of 100psig Standard Product Description: · ASME “M”/CSD-1/UL Approval with 120V controls · CSA/CUL Approval for Canada · Incoloy elements · NEMA 1 Panel box with controls · Low water light · McDonnell Miller MM-150 Float type level control · Gauge glass assembly · McDonnell Miller MM-150 Primary LWCO with auto reset · Probe Type Secondary LWCO with manual reset · Operating limit pressure control with auto reset · High limit pressure control with manual reset · Stainless steel cabinet One (1) Fulton Model HTL-30 Horizontal Condensate Return/Feedwater Tank (non-code), complete with One (1) Feedwater Pump. Pump voltage is 120/60/3. Standard Tank Features and Trim: – Adjustable float valve for water level control – Suction isolation valve, flexible vibration isolator, and strainer – Connections for condensate return, vent, water make-up, and pump discharge – Sight glass with isolation valves and protector rods One (1) ASME Blowdown Tank Standard Features and Trim: – ASME Stamped at 75 psig – Baffle plate design to absorb steam flash and pressure – Large steam vent opening – 3×4 Hand hole for clean out and inspection – Self-actuated cooling kit Deluxe Chemical Feed System, complete with one (1) suction and discharge tubing, one (1) chemical injection quill with check valve, One (1) Water Meter, and One (1) Proportional chemical pump. Water Softener System Standard Features and Trim: – Twin tank alternating concept with meter initiation – Fiberglass mineral tanks, seamless non-metallic, with 5 year warranty – All brass motor driven control valve with fully adjustable regeneration cycles – Self-adjusting backwash controller – Timed brine refill control – High capacity polystyrene resin
Manufactured: May 2022

Rigging Fee $1,983

RESERVE BID -- for this lot Seller has set a minimum acceptable bid at $12,000.  (**IF THE RESERVE IS NOT MET, THEN WHAT HAPPENS?  Answer: Should the posted Reserve NOT BE MET then Seller, at their option, may choose to accept any such high bid amount that may be LOWER than the Reserve within 24 hours of close of lot.   High Bidder will be obligated to purchase the lot at their high bid price should the Seller choose to accept the high bid within 24 hours of close of auction -- EVEN IF THE RESERVE IS NOT MET.  Auctioneer will email all High Bidders bidders within 24 hours to inform them if their high bids were accepted. Any high bid amount less than this reserve number may or may not be accepted.)