(Located in Golden, Colorado) MoreBeer Pro 3.5 bbl Mash Tun, 27kW, 208v 3-phase Electric boil

(Located in Golden, Colorado) MoreBeer Pro 3.5 bbl Mash Tun, 27kW, 208v 3-phase Electric boil kettle, and wort grant - unused, still in crates. Manufactured in 2023. Sale includes an insulated mash tun, insulated electric boil kettle, and a stainless wort grant. Buyer will need to source a control panel from a vendor such as Brewmation. It is designed for 208v, three-phase power. Includes:

Brew Kettle:
Insulated walls for safety and energy efficiency. Made from 304 stainless steel with passivated internal 2B polished finish
Dished bottom with 2″ tri-clamp center drain for easy trub clean up
Internal float switch located just above the heating elements to protect the elements from running dry
Tangential port for whirlpool
Side drain with hop dam for easy whirlpooling and good trub separation
Dished bottom with 2″ center drain for easy trub clean up
Fill Port for adding dilution water
Float Switch to protect the electric elements from running dry (wiring required)
Powered by (3) 9,000-watt 3-phase 208V elements
Total Amperage Draw: 75 amps at 3ph 208V
The kettle must be grounded
PT100 Temp Sender
Analog Temp Gauge for quick reading
CIP Ball
Glass Manway Door
Internal LED Light
Internal Finish: #2B
Tank Height: 54″, Tank Diameter: 41″, Empty Weight: 360 lbs, Working Volume: 3.5 bbl, Max Volume: 5.1 bbl
All ports are 1.5″ TC except for DN350 Manway, DN219 Vent Port, DN80 LED Light Port, 2″ TC Drain Outlet, 2″ TC Element Ports

Mash Tun:
Insulated walls to eliminate heat loss during mashing. Made from 304 stainless steel with passivated internal 2B polished finish
Slotted 3-piece false bottom, adjustable height sparge arm, and large grain out manway door with removable chute
Sparge arm features two inlets for HLT and recirculation
4″ tri-clamp grain inlet port can be used with optional Grist Hydrator
Large side grain out door
Removable grain out chute
Large top lid for easy stirring
PT100 Probe
Analog Temp Gauge
Internal LED Light
Internal Finish: #2B
Tank Height: 56″, Height w/ Hydrator: 72″, Tank Diameter: 41″, Empty Weight: 360 lbs, Working Volume: 3.5 bbl, Max Volume: 4.6 bbl, Manway: 20.8″ x 16.9″
All ports are 1.5″ TC except for 4″ TC Sparge Arm Port, 4″ TC Grist Hydrator Port, DN80 LED Light Port

Wort Grant: 40L / 10.5 gal, Made from 304 stainless steel, Silicone sight tube, Ships without valves

RESERVE BID -- for this lot Seller has set a minimum acceptable bid at $4,000. (**IF THE RESERVE IS NOT MET, THEN WHAT HAPPENS? Answer: Should the posted Reserve NOT BE MET then Seller, at their option, may choose to accept any such high bid amount that may be LOWER than the Reserve within 24 hours of close of lot. High Bidder will be obligated to purchase the lot at their high bid price should the Seller choose to accept the high bid within 24 hours of close of auction -- EVEN IF THE RESERVE IS NOT MET. Auctioneer will email all High Bidders bidders within 24 hours to inform them if their high bids were accepted. Any high bid amount less than this reserve number may or may not be accepted.)

LOADING FEE: The tanks are still on their shipping crates ready for transport. Buyer will need to commission a shipping company with lift gate service, as no forklifts are available at the site where the tanks are currently stored. "