153
Britespan Tarp Building, model APEX 3,1, approx. 70 ft. x 126 ft., 14 ft. galvanized arches, CAS-
1/10
Please confirm your bid
You are about to place a bid of USD
Timed Auction:Current bid:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Please confirm purchase
You are about to buy this lot for
USD.
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Proceed With Buy It Now?
We have noticed that your maximum bid is higher or equal to the buy it now price for this lot.
Would you like to discard your maximum bid and proceed with the buy it now option?
Warning
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer (416 736 1367)
Your bid is off increment
Choose one of the quick bid options below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bids do not include Tax, buyer’s premium or delivery.
By confirming your bid, you agree that you have read and accepted bidspotter.com and the auctioneer's terms and conditions. Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be accepted by the auctioneer.
Description
Britespan Tarp Building, model APEX 3,1, approx. 70 ft. x 126 ft., 14 ft. galvanized arches, CAS-A660 certified, new tarp installed april 2022, manual tarp garage door, approx. 20 ft. high x 25 ft. wide, man door, approx. 5 ft., base made with two level of interlock concrete blocks, del light inside, galvanized vent trap, approx. 6 ft. x 48 in. x 48 in., 186 concrete blocks, approx. 2 ft. high x 3 ft. wide x 4 ft. long
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Britespan Tarp Building, model APEX 3,1, approx. 70 ft. x 126 ft., 14 ft. galvanized arches, CAS-A660 certified, new tarp installed april 2022, manual tarp garage door, approx. 20 ft. high x 25 ft. wide, man door, approx. 5 ft., base made with two level of interlock concrete blocks, del light inside, galvanized vent trap, approx. 6 ft. x 48 in. x 48 in., 186 concrete blocks, approx. 2 ft. high x 3 ft. wide x 4 ft. long
Surplus Assets of MidAtlantic Minerals
Sale Date(s)
Venue Address
1075 Boulevard Champlain
Sillery
Quebec
G1K 0A2
Canada
EXCLUSIVE RIGGER FOR THE SALE:
TBD
Important Information
Timed Online Auction
We are pleased to announce that TCL Asset Group Inc. will be offering for sale by online auction a complete "40 Ton/hour Process Plant" used to crush, process and bag quartz, limestone and dolomite.
Prior to auctions sale, we are accepting offers on major assets. To submit an offer please email Terrance Jacobs at tjacobs@managingyourassets.com.
Bidding Closes: Wednesday, July 24 at 10:00 AM ET
Inspection: Tuesday, July 23 - By Appointment Only - Please contact 905-660-1367
PARTIAL CATALOG POSTED - COMPLETE CATALOG WITH STARTING BIDS COMING SOON!
ASSETS RECENTLY DISMANTLED FOR EASE OF REMOVAL!
MAJOR ASSETS INCLUDE:
PRIMARY CRUSHING EQUIPMENT
- Complete Cederapid Jaw Crusher System, S/N 25537, incld. Jaw Crusher 10 X 36, 8 MT feed hopper, 2 deck screen, screen 3 ft. x 5 ft., w/ 40hp motor with soft start, conveyor to feed screen 3 ft. wide x 5 ft. long, recirculating system, spare parts, fully automated via remote control, can make any rock between 1 in. to 4 in. fully rebuilt in 2023
- Cemco VSI Crusher, model Superchipper 54, w/ 150hp electrical drive and remote control motor, rock shelf kit, anvil kit, 27 in. rotor with 4 port, 75hp lube oil system/reservoir and filter protection, vibration switch, 115 volts ac, 125 TPH capacity, 5 in. max feed, oil cooler, 3 phase, 600 volts, 1/4hp forced air 6-25 GP, spare parts rotor liner, 150hp WEG spare motor, housing and table
SEPARATION & FILTRATION EQUIPMENT
- SOLD Midwestern 3 Screen Unit, model MEV 5 X 10, incld. 5 deck of 5 ft. wide x 10 ft. long with silicone balls to clean screen panel, steel structure, feed discharge and 4 spare bearing housing, w/Toshiba 10hp motor
- Complete Triple Deck Magnetic Roll Separator, model D11015-3, S/N RMS3.11.15, overall dims. 2350 MM X 1550 MM X 2400 MM, 14000 GAUSS of 110 DIA X 1500 mm, vibrofeeder with speed control able to handle 0 to 6 metric tons per hr of quartz sand 0.1 MM-0.7 MM at 200 deg. F, w/ control panel, Siemens motor, 600 volts, 60 Hz
- Eriez Magnetic Drum, model SS-RE(HT)-HF, S/N 228680 1/2, approx. 12 in. diameter x 24 in. width, 11ga stainless steel drum shell with wiper bar and cast aluminum end flanges, complete with sealed for life ball bearing, high temperature magnetic circuit suitable for material temperature up to 250 deg. F, drum equipped with a two-piece, replaceable 304SS wear wrap, w/infeed hopper with adjustable discharge gate, adjustable splitter, inspection access panels and baldor 1/3 hp gear motor and drive (2015)
- Eriez Magnetic Drum, model DIH HFP 18 X 48, S/N To51359o, approx. 18 in. diameter x 48 in. width, 11ga stainless steel drum shell with wiper bar and cast aluminum end flanges, complete with a sealed for life bearing, high temperature circuit up to 250 deg. F, drum equipped with a two-piece replaceable 304SS wear wrap, w/infeed hopper with adjustable discharge, 3/4 hp motor
ROLLING STOCK - SURFACE ASSETS
- Komatsu Crawler Excavator, model PC200, 8915.2 hours
- Komatsu Wheel Loader, model WA320-3, 13669.4 hours
- Komatsu Wheel Loader, model WA380-6, 17351.1 hours
- Atelier Usinage Carrignan Mobile Rail Car Platform, 20,000 lbs. capacity
- Atelier Usinage Carrignan Mobile Truck Ramp Platform, 20,000 lbs. capactiy
- Sea Container 40ft.
MECHANICAL HANDLING EQUIPMENT-BELT & SCREW CONVEYORS
- C1 Outside-Belt Conveyor, 100 ft. long x 24 in. width belt, incld. TxT625CT Dodge gearbox, Brook Hansen motor 20hp, 600 volts, vulcanized belt joint, belt 3 ply, 330, 1/4 x 1/16, w/hopper 9 ft. x 12 ft. w/grizzly, skirting on hopper only, anti-sticky Luff anti-sticky return iddler, 35 deg. hidler and Flexco Eliminator P-type belt cleaner
- CF-1-MGR Belt Conveyor, approx. 20 ft. 2 in. long x 24 in. width belt, 3 ply, 1/4-1/16, incld. TXT525BT dodge gearbox, dodge bearing, Brook Hansen motor 15 hp, 600 volts, w/ vulcanized belt joint, conveyor support attach on equipment, abrasive green resistant rubber skirting, Strongco 20 deg. hilder, anti-sticky luff return iddler and Martin Pit Viper belt cleaner, fully enclosed (2015)
- SOLD C-1-MGR Belt Conveyor, approx.10 ft. long x 24 in. width belt, high temp belt 2 ply, 3/16 x 1/16, incld. TXT425AT dodge gearbox, dodge bearing, Brook Hansen motor 7.5 hp, 600 volts, w/ mechanical belt joint, conveyor support attach on top, abrasion resistant green skirting, Strongco 20 deg. hilder, and Martin Pit Viper belt cleaner, fully enclosed (2015)
- SOLD C-2-MGR Belt Conveyor, approx. 26 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TA2115A dodge gearbox, dodge bearing, Cantoni motor 5 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder,Strongco regular return iddler, and Martin Pit Viper belt cleaner, fully enclosed
- SOLD C-3-MGR Belt Conveyor, approx. 29 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TA2115H dodge gearbox, dodge bearing, Cantoni motor 5 hp, 600 volts, w/ mechanical belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder,Strongco regular return iddler, and Martin Pit Viper belt cleaner, fully enclosed
- SOLD C-4-MGR Belt Conveyor, approx. 27 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TXT425AT dodge gearbox, dodge bearing, Brook Hansen motor 10 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder,Strongco regular return iddler, anti-sticky luff, and Martin Pit Viper belt cleaner, fully enclosed
- C-5-MGR Belt Conveyor, approx. 21 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TXT525BT dodge gearbox, Brook Hansen motor 15 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder, anti-sticky luff, and Martin belt cleaner, fully enclosed
- SOLD C-10-MGR Belt Conveyor, approx. 25 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TXT425AT dodge gearbox, Brook Hansen motor 7.5 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder, anti-sticky luff, and Martin Pit Viper belt cleaner, fully enclosed
- SC-2-Screw Conveyor, approx. 16 in. screw diameter x 30 ft. long conveyor, w/dodge TA3203H25 gearbox, dodge bearing, Brook Hansen 10 hp, 600 volt motor, flight spec. 1/4 thick steel
- SC-6-Screw Conveyor, approx. 16 in. screw diameter x 16 ft. 3 in. long conveyor, w/dodge bearing, flight spec. 1/4 thick steel
- SC-9-Screw Conveyor, approx. 16 in. screw diameter x 25 ft. long conveyor, w/dodge TA3203H25 gearbox, dodge bearing, Epact-HPE 7.5 hp, 600 volt motor, flight spec. 1/4 thick steel
- SC-10-Screw Conveyor, approx. 16 in. screw diameter x 19 ft. long conveyor, w/dodge TXT424AT gearbox, dodge bearing, Brook Hansen 7.5 hp, 600 volt motor, flight spec. 1/4 thick steel
- SC-12-Screw Conveyor, approx. 9 in. screw diameter x 13 ft. long conveyor, w/dodge size 2 gearbox, sealmaster bearing, Epact-HPE 2 hp, 600 volt motor, flight spec. 3/16 thick steel
- SC-13-Screw Conveyor, approx. 9 in. screw diameter x 10 ft. long conveyor, w/speedtronics SPTXT225TXMFPP gearbox, dodge bearing, Epact-HPE 2 hp, 600 volt motor, flight spec. 3/16 thick steel
- SC-15-Screw Conveyor, approx. 9 in. screw diameter x 10 ft. long conveyor, w/dodge AD225 gearbox, dodge bearing, Brook Hansen 2 hp, 600 volt motor, flight spec. 3/16 thick steel
MECHANICAL HANDLING EQUIPMENT-BUCKET ELEVATORS & STACKER CONVEYORS
- SOLD BE-2-Strongco Centrifugal Discharge Belt Bucket Elevator, model CLB-4, approx. 16 belt width, 33 ft. discharge height, Strongco thick mild steel bucket with ar lip, w/ dodge TXT625T gearbox, dodge bearing, Brook Hansen 15 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
- SOLD BE-3-Strongco Centrifugal Discharge Belt Bucket Elevator, model CLB-4, approx. 16 belt width, 68 ft. 8 in. discharge height, Strongco thick mild steel bucket with ar lip, w/ dodge TXT625T gearbox, dodge bearing, Brook Hansen 20 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
- SOLD BE-4-Thomas Conveyor Bucket Elevator, approx. 14 belt width, 37 ft. 6 in. discharge height, Tapco thick mild steel bucket with ar lip, w/ dodge TA4207H40 gearbox, dodge bearing, WEG 10 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
- SOLD BE-5/BE-6/BE-7/BE-8-Thomas Conveyor Bucket Elevator, approx. 9 belt width, 18 ft. discharge height, Tapco thick mild steel bucket with ar lip, w/ dodge TA0107L31 gearbox, dodge bearing, WEG 1,5 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
- BE-9-Thomas Conveyor Bucket Elevator, approx. 14 belt width, 15 ft. 8 in. discharge height, Tapco thick mild steel bucket with ar lip, w/ dodge TA3203H32 gearbox, dodge bearing, WEG 7,5 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
- Willis Pit Portable Transfer Conveyor, Stacker, approx. 24 in. width belt x 50 ft. long, w/ WEG 10 hp, 600 volt motor, dodge bearing, vulcanized belt joint, hydraulic legs, regular return iddler and fully enclosed galvanized covering (2020)
- Stacker Conveyor, approx. 24 in. width belt x 70 ft. long, w/ hopper, Westinghouse 10 hp motor, Sala 21420 gearbox, dodge bearing, vulcanized belt joint, adjustable leg, Strongco regular return iddler, fully enclosed plastic covering
- Vickey Radial Stacker Conveyor, approx. 30 in. width belt x 85 ft. long, w/ hopper approx. 12 ft. x 8 ft., Teco Westinghouse 15 hp motor, gearbox TXT425, vulcanized belt joint, adjustable leg, regular return iddler (2018)
- Radial Stacker Conveyor, approx. 30 in. width belt x 100 ft. long, w/ Epac 20 hp motor, 600 volts, dodge gearbox TXT525, vulcanized belt joint, adjustable legs, regular return iddler (2010)
LABORATORY EQUIPMENT-LAB ASSETS
- Xrite Spectrophotometer, model ci4200
- Hunter Lab Spectrophotometer, model colorflex EZ (2022)
- W.S. Tyler Rotap Sieve Shaker, model RX-29 S/N 18904
- W.S. Tyler Rotap Sieve Shaker, model RX-29 S/N 10-4854
- Various sieves ranging between 325 mesh to 9mm
- Ohaus Lab Scale (0-1.5kg)
PLANT SUPPORT EQUIPMENT-ELECTRICAL ASSETS
- Klokner Moelle MCCs
- Distribution panels
- Breaker panels
- Stop and start panels
- Safety switches
- Capacity banks
- Transformers
Important Information:
- All assets are sold AS IS, WHERE IS.
- Please review the catalogs and read all LOT Descriptions carefully.
- Buyer’s Premium is 18%.
- QST - sales tax is 14.975%.
- Sale is conducted and payable in USD Funds.
- Port of Quebec Entry Requirements
- Complete Terms & Conditions
Please contact us for information about rigging and removal
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Friday, 8:00 AM EST – 8:00 PM EST
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms and Conditions
TCL Asset Group Inc. Live Webcast and Timed Online Auction Terms & Conditions:
1. A Buyers Premium of 18% will be in effect for this auction. AUCTION CONDUCTED AND PAYABLE IN USD Only.
2. All invoices must be paid in full no later than Thursday, July 25 by 4:00 PM Local Time. Payment can be made by WIRE TRANSFER. NO COMPANY CHEQUES, CREDIT CARD OR DEBIT CARD PAYMENTS. Payments must be made in USD.
3. Removal is BY APPOINTMENT ONLY. STRICT REMOVAL DEADLINE! REMOVAL MUST BE COMPLETED NO LATER THAN Friday, August 9 BY 3:00 PM LOCAL TIME - NO EXCEPTIONS! ALL REMOVAL MUST BE SCHEDULED BY APPOINTMENT ONLY BY CALLING 905-660-1367. Payment must be received in full prior to removal.
4. Site Supervisor: TBD 905-660-1367.
AUCTIONEERS ROLE IN TIMED ONLINE AUCTIONS
Subject to amendments and modifications announced by the Auctioneer BY ANNOUNCEMENT ON DAY OF SALE OR EMAIL NOTIFICATION at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions:
1. A deposit equal to 25% of purchases is required at the time of sale. The balance of the purchase price must be paid in full within the time period herein provided, in the Event Specific Terms & Conditions. All payments shall be by way of cash, certified cheque, bank draft or wire transfer. Deposits on account of purchases may be made in advance of the auction. Deposits will be refunded immediately after the auction if no purchase is made. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before time of sale.
2. Sales taxes arising on a sale shall be paid to the Auctioneer at the time of sale.
3. Auctioneer reserves the right to sell subject to reserve and to purchase for the account of others, whether by verbal or written proxy, all subject to prior sale.
4. All sales shall be concluded on the fall of the hammer (when time expires) or as indicated by the Auctioneer and no purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received.
5. ALL SALES ARE FINAL, ON AN "AS IS – WHERE IS", "IN PLACE", "WITH ALL FAULTS" BASIS WITH NO CONDITIONS OR WARRANTIES. WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION, OR OTHERWISE.
NO SALE SHALL BE INVALIDATED BY REASON OF AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE ADVERTISEMENT OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RELIED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS.
PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTION AND INVESTIGATIONS.
6. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions. The purchaser shall be responsible for all costs of removal and shall be liable for any damage, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations and all requirements established by the Auctioneer for the removal of articles, including requirements as to bonding of movers. Please refer to the Removal Terms & Conditions herein provided.
7. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time.
8. Time shall be of the essence. If a purchaser fails to make payment or remove goods within the time periods herein provided in the Event Specific Terms & Conditions, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the purchaser shall be liable for the shortfall and all costs and expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per cent per annum), legal fees, removal and storage (a minimum rate of $2.00 per sq. ft. per month) and commissions, incurred in such resale.
9. The Auctioneer is acting as agent only and is not responsible for the acts of his principals.
10. This catalogue is meant merely as a guide. The Auctioneers believe the descriptions contained herein to be correct but make no warranty in connection herewith. Auctioneers announcements on day of sale take precedence over published information.
11. If for any reason whatsoever, the Auctioneer is unable to deliver any lot, the Auctioneers sole liability, if any, shall be the return of any monies paid on such lot only.
12. Bidders acknowledge that any auction site is a potentially dangerous place, with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the Auctioneer, his agents, employees or principals for any injuries sustained nor for damages to or loss of property which may occur from any cause whatsoever.
13. Purchasers acknowledge that TCL Asset Group Inc. or associates are not the shippers or exporters of any purchased items being shipped from the auction site.
14. These terms and conditions together with any amendments or modifications expressly made by the Auctioneer at the time of the auction constitute all the terms and conditions with respect to the sale of the articles at this auction. There are no representations, warranties, terms, conditions, undertakings, or collateral agreements except as hereinabove provided.
REMOVAL REQUIREMENTS
The following are terms & conditions for all Purchasers, their employees, riggers, contractors and agents; (who will be further referred to as "Purchasers/Movers/Riggers", who participate in the disconnection and/or removal of equipment/articles to abide by.
*All invoices must be paid in full before commencement of removal. Check with TCL Asset Group Inc.’s site representative. Riggers, please do not put business cards on machines.
1. Purchasers/Movers/Riggers are responsible to remove all articles purchased.
2. PURCHASERS/MOVERS/RIGGERS SHALL BE RESPONSIBLE FOR PROPER DISCONNECTION AND TERMINATION OF ALL ELECTRICAL, WATER AND/OR AIR LINES TO YOUR EQUIPMENT AS STIPULATED BY SITE REPRESENTATIVE; THE SHEARING OF ANCHOR BOLTS FLUSH WITH THE FLOOR; LEAVING YOUR WORK AREA IN BROOM SWEPT MANNER; THE ERECTING OF SAFETY BARRIERS AS REQUIRED WHERE PITS OR HOLES HAVE BEEN CREATED AS A RESULT OF EQUIPMENT REMOVAL; THE REMOVAL, OFF PREMISES, OF ALL HAZARDOUS WASTE OR OIL CONTAMINANTS CONTAINED THEREIN OF PURCHASED ASSETS, IN CONJUNCTION WITH ALL ENVIRONMENTAL LAWS; ANY SPECIFIC TERMS OR CONDITIONS INDICATED BY THE AUCTIONEER AT THE TIME OF SALE.
a. All Termination of GAS lines will be disconnected and capped by a licensed gas fitter.
b. All ELECTRICAL disconnects to be done in accordance with any federal, state/provincial or local codes.
c. NO ARTICLE(S) SHALL LEAVE THE PREMISES UNTIL ALL THE AFORMENTIONED HAVE BEEN COMPLETED TO THE SATISFACTION OF TCL ASSET GROUP INC. SITE REPRESENTATIVE.
d. RIGGERS: Quote your customers accordingly; you shall be liable for all costs in compliance with the above.
e. Purchasers/Movers/Riggers shall assume all responsibility and liability for any and all articles
"staged" for shipment, before it leaves the premises.
3. Purchasers/Movers/Riggers must provide to TCL Asset Group Inc. a certificate of insurance of not less than $5,000,000.00 evidencing statutory workers compensation and employers liability insurance and automotive and comprehensive liability insurance coverage (bodily injury
and property damage) per person and occurrence naming TCL ASSET GROUP INC. as well as the Auction name and address.
4. Where available, bridge cranes and/or hoists may only be used by certified crane operators with insurance and only with the expressed written permission of crane owner and/or TCL Asset Group Inc.
5. TCL Asset Group Inc. site representative must examine all articles being loaded out and check off Purchasers shipping invoice.
6. Purchasers/Movers/Riggers shall be held liable for all costs and damages or repairs to property as a result of their negligence.
7. Hours of removal are Monday to Friday from 9:00am to 4:00pm, unless otherwise specified. Anyone requiring access beyond our published deadlines is subject to a non-negotiable per diem rate.
8. NO ARTICLE(S) SHALL LEAVE THE PREMISES UNTIL THE AFOREMENTIONED HAVE BEEN COMPLETED TO THE SATISFACTION OF A TCL ASSET GROUP INC. EMPLOYEE/SITE REPRESENTATIVE.
