Branson Sonifier 450 Ultrasonic Cell Disruptor w/ Converter and Chamber

FEATURING:

• Leistritz Twin Screw Extruder Model ZSE100GLAAX, S/N 3048070
• Leistritz Twin Screw Lab Extruder Model MIC27/GL40D, #3051, (New 2001), Drive KW 10.5, Screw RPM 500
• Randcastle Vertical Extruder, 8” x 2” OD Sheet Stack/Pull Rolls/Winder/Sheet Die
• Apex Extruder Element Extractor Model 40-140, S./N 62225 (New 2016) 40-140mm Capacity
• Boy 22-Ton Injection Molding Machine Model 22S (New 1998)
• Conair Water Slide Pelletizer with Pumps and Condensate Collector
• Conair 2” Strand Pelletizer, 20NK, with Air Knife Model T206GWS, S/N 122115
• Henschel Mixer, 200 Liter, SS Receivers
• Wiley Grinding Mill
• Buss 100mm Kneader with Cross Head Extruder
• Ross Jacketed Vacuum Mixer Model LDM-2
• Fitzpatrick Comminutor Fitz Mill Model DAS06, S/N 11071
• Gravimetric Feeder for Twin Screw Extruder
• Sheneck feeder
• Schneck Volumetric Feeder
• Henschel Lab Mixer, 10-Liter, 3-Blade
• Vacuumax Loading Station with Baghouse and Blower
• JWI Material Vertical Spiral Vibratory Cooling Conveyor
• Witte 21" x 72" Screen/Classifer, S/N 5782, 2-Deck, Stainless, Shaker Table
• Extech5” Screen Changer, Sliding Plate, Hydraulic Pump
• Sweco 48” Vibratory Screener, Single Deck, Stainless Model XS48S88, 2.5 HP
• Sweco 18” Vibratory Screener, Single Deck, Model LS18S
• JVI Air Classifier Model SUZ400X1800 (New 2001)
• Conair Desiccant Dryer with Hopper
• UnaDyne Desiccant Dryer Model DHD6 with Hopper
• (2) Brabender Plasticorder with .75" Extruder and Mix Head
• Brabender 3-Roll Sheet Stack, 8" Wide x 4" OD
• Dynisco Lab Press Model LCR7001, S/N 0210-0655, with Gemco Rotary Limit Switch
• Dynisco Capillary Rheometer
• Dynisco Impact tester
• MTS Tensile Tester Model Alliance RT/30, 50KN, S/N M248430/E06142001
• Tinius Olson Plastometer
• Grieve Oven Model 32-650 Max Temp 550 Deg F, Fuel Electric Motor 3 HP, S/N 411532
• Grieve Oven Model AF-500, S/N 370134, 4.4 KW, Max Temp 500 Deg F
• Bruker Gas Chromatograph Model 450-GC
• Bonnot Pug Mill
• Apex Tool Extractor Model 40-140
• JWI Filter Press, 29-Plates
• Advantage 20 Ton Air Cooled Chiller Model M1D-20-AF, S/N 16331 (New 2018), 5KA-RMS at 600V Max, Refrigerant - 410A
• Spencer Industravac Vacuum System
• Pollution Control Products Gas Fired Burn Out Oven Model ICC27F4070, For Screw Elements, 230,000 BTU, Natural Gas
• Clausing Colchester 15" Toolroom Lathe (New 2001) S/N CGO152, Spindle Speed 20-2500
• Bridgeport 2 HP EZ Trak CNC Vertical Mill, Power Feed 42" Table
• Crown Electric Forklift Series 4000, Triple Mast, Side Shift
• Yale Electric Standup Forklifts Model NDR030, Side Shift, Triple Mast

EQUIPMENT LOCATION:

40 Smith Place

Cambridge, MA 02138

AUCTION TYPE:

Online Auction - Internet Bidding Only

AUCTION DATES:

First Lot Closes: Thursday, May 30, 1:00 PM (ET)

Lots have 1-minute staggered closing times with 1-lot closing every minute

INSPECTION:

Open House Inspection: Wednesday, May 29, 10 AM to 4 PM

SHIPPING - RIGGING:

Buyers are fully responsible for all rigging and shipping costs. We strongly recommend buyers obtain rigging quotes prior to bidding and confirm the rigging company can remove the intended purchases prior to the final removal date. Riggers listed on our site are not exclusive, buyers may use any rigging company of their choice as long as they provide Thomas Industries with satisfactory liability insurance.

 For Rigging Quotes Contact

 Pedowitz Machinery Movers

Ray Brunelle

Phone: 917-939-2975

ray@pedowitz.com

TERMS & CONDITIONS:

Registration Deposit / Bidder Approval.  All bidders that aren't pre-approved by Thomas Industries will be required to provide a refundable deposit, prior to being approved for bidding.  The deposit must be  25% of the amount the bidder is looking to be approved for bidding up to.  Thomas Industries, at their sole discretion, reserves the right to deny bidding privileges to any customer. For information on bidder Approval or to provide a registration deposit contact Irina Lekhmus (email: irina@thomasauction.com or Phone: 203-458-0709).

Currency:  (USD).  This auction will be conducted in United States currency (USD)

Buyer's Premium: 18%

Staggered Closing Times: Lots Have 1-Minute Staggered Closing Times.

Auto Extend Bidding: If a bid is submitted with less than 3-minutes remaining, the closing time for that lot will be extended by 3-minutes.

Payment Due In Full: Friday, May 31, 2024

Payment Types:  Certified Check, Wire Transfer, E-Check (ACH) or Crypto (BTC/ETH)

As-Is Where-Is:  All Items Are Sold "As-Is Where-Is" With No Warranty or Guarantee of Operating Condition.  Auctioneer Strongly Recommends That Buyers Inspect Equipment Prior to Bidding

Removal: Removal begins Monday, June 3, 2024. Removal Hours 9 am to 4 pm (Monday to Friday). All items must be removed by Friday, June 17, 2024.   Any items not removed by this date will be considered abandoned and the bidder will forfeit all right to any items not removed, including all deposit or payment monies

Removal Costs: Buyers are fully responsible for all cost to remove their purchases.  Please get removal quotes prior to bidding and bid accordingly.

Legally Binding Contract:  All bids constitute a legally binding contract and bidders will be legally obligated to make payment and remove items in accordance with the terms and conditions of the sale.

=====================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

• Monday – Friday, 8:00 AM ET – 8:00 PM ET

Email: support@bidspotter.com

Office: 253-858-6777 Toll Free: 866-597-2437

Frequently Asked Questions