James Rohdin Cornering Machine Model HSM1, S/N 2473

By Order of Loyola Paper Company, (3) Late-Model Marquip 1500mm Precision Sheeters Being Offering by Privately Negotiated Sale, Followed by an Online Auction of the Support Equipment, Including: Slitters, Guillotines, Forklifts, Balers, Compressors, etc.

FEATURING:

• Barry-Wehmiller Marquip Ward United 1500 mm (59”) Wizard Precision Sheeter #2 (New 2006) with (2) 72” Max Dia Roll Infeed (Dual Mode Dancer/Decurlers (4-Roll Stands), S/N 74560-7440/7340,  Marquip Wizard That Has Been Upgraded To The 100L Dual Motor Option It Can Run Substrates From 50# Paper To .036” Board, Multiple Webs Of Stock From 50# To .014” Can Be Run Through The Dual Slitting Section. The Five Head Slitting Section Allows For Four Piles To Be Slit From A Single Roll, Maximum Speed Is 1000 FPM Which This Machine Was Able To Consistently Produce Highly Accurate Clean Edged Sheets, Inline With The Sheeter Are Two Marquip Dual Unwinds Allowing Four Rolls To Be Sheeted At Once. Each Of The Unwinds Feed Into A Marquip 3 Bar Progressive Decurler With A Rotary Dancer That Allows For Flat Sheets On Even Difficult To Decurl Heavyweight Stocks, Width 8.5”-59.875”, Length 11”-82” (Operators Have Run 98” Lengths On This Machine) (Being Offered For Private Sale)
• Barry-Wehmiller Marquip Ward United 1500 mm (59”) Precision Sheeter #3 (New 2005) with (4) 72” Max Dia. Roll Stands, S/N 74587,  Marquip Sheet Leader Retro Fit Performed By AJ Engineering That Can Sheet Substrates From 50# Paper To .028” Board, Multiple Webs Of Stock From 50# To .014” Can Be Run Through The Dual Slitting Section. The Four Head Slitting Section Allows For Three Piles To Be Slit From A Single Roll, Inline With The Sheeter Are Four Moore And White Shaftless Unwinds With Multiple Decurl Bars And Load Cell Tension Controllers, Width 18”-59.875”, Length 24”-78” (Being Offered For Private Sale)
• Marquip 1500 mm (59”) Precision Sheeter #1 (New 1999 – Modified 2006) with (2) 72” Max Dia. Roll Infeed Stands, Tidland 4-Head Slitter, Marquip L-Knife Model III S/N 71011-1000, Allen Bradley Panel View Plus 600 Control, Marquip Double Fly Knife Retrofit Performed By AJ Engineering, This Machine Can Handle 72” OD Rolls For Input And Can Produce 2 Out Sheets Up To A Width Of 30” And Single Out Sheets To 60” At Any Length Between 19” And 125”. This Sheeter Is Unique In Being Able To Produce Grand Format Sheets On Substrates From .008” To .030” In Thickness That Are Accurately Cut And Neatly Stacked, Width 20”-60”, Length 19”-125” (Being Offered For Private Sale)
• Lawson Pacemaker II guillotine Model 110, S/N BK182, DL MCC Controls, Southworth Infeed & Outfeed System
• Cary Slitter Rewinder with Roll Stand
• Precision Air Convey Trim Removal System S/N 74587-5820 (New 2005) with Choppers, Divert System
• Fox Vertical Hydraulic Baler, 5 HP
• Boge 30 HP Rotary Screw Air Compressor Model c30F
• Sullair Horizontal Tank Air Compressor
• Yale LPG Forklift Model GLC120, S/N 2139C, 11,500 lb Cap, Triple Mast, Side Shift, Roll Clamp
• Komatsu LPG Forklift Model FC45ST-7, S/N 101520A, 9200 lb Cap, Triple Mast, Side Shift, Roll Clamp
• Caterpillar LPG Forklift Model GC25K, S/N 2328, 4700 lb Cap, Triple Mast, Side Shift
• Terex Electric Scissor Lift Model TS20, S/N 7465, 800 lb Cap
• Southworth Pallet Turner / Inverter S/N 5713, 5000 lb Cap

EQUIPMENT LOCATION:

951 Lunt Avenue
Elk Grove Village, IL 60007

AUCTION TYPE:

Private Sale / Online Auction

AUCTION DATES:

First Lot Closes: Thursday, August 29, 11:00 AM (ET)
Lots have 1-minute staggered closing times with 1-lot closing every minute

INSPECTION:Open House Inspection: Wednesday, August 28, 10 AM to 4 PM (local time)

RIGGING/REMOVAL
Buyers are fully responsible for all rigging and shipping costs. We strongly recommend buyers obtain rigging quotes prior to bidding and confirm the rigging company can remove the intended purchases prior to the final removal date. Riggers listed on our site are not exclusive, buyers may use any rigging company of their choice as long as they provide Thomas Industries with satisfactory liability insurance.

For Rigging Quotes Contact:

Chicago Industrial Rigging
Val Striev
Phone: 847-845-7255

Rey Rigging Industrial
Rey Chavez
Phone: 708-473-9434

=====================================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

• Monday – Friday, 8:00 AM ET – 8:00 PM ET

Email: support@bidspotter.com

Office: 253-858-6777 Toll Free: 866-597-2437

Frequently Asked Questions