Bry-Air, Inc.

by Thompson Auctioneers

Ends from Sep 23, 2025 10am ET (3pm BST) Timed Online Auction

Important Information

ONLINE FABRICATION EQUIPMENT AUCTION

By Order of Court Appointed Receiver

"Jack Harris of Intercept Management Corp."

Case No. 25 CV H 06 0651

 

 

 

Bry-Air, Inc.

10793 State Route 37, Sunbury, OH

  

Online Bidding Opens Soon

Bidding Begins Closing Tuesday September 23, 10 am EST

Inspection:  Monday Sept. 22, 10 am-4 pm EST

 

Multicam Model APEX 3R  CNC Router, New in 2022 "Beautiful"

Accurshear Hyd. Shear • LVD 10' x 150 Ton Press Brake • Amada Power Notcher

WA Whitney 30 ton Hyd. Punch • Hyd-Mech Tilting Arbor Vertical Band Saw

Lown B400 Power Rolls • (9) Various Lincoln & Miller Welders • Acorn Type Welding Table 

Hamech 7000 lb. Forklift***Crown 4000 lb. Capacity Forklift

Large Quantity of Support Equipment, Parts, Inventory

 

 

MULTICAM APEX 3R CNC ROUTER**NEW 2022

 MULTICAM Model APEX 3R CNC Router, New in 2022,  3-Axis, 6' x 12' Capacity, 8 position Linear Tool Changer, Dust Collection Unit, s/n 3-305-R16-14833. This CNC Router is like Brand New!! 

 

HYDRAULIC SHEAR**HYDRAULIC PRESSBRAKE**NOTCHER**PUNCH PRESS

ACCURSHEAR Model 625010 Hydraulic Shear,  10' x 1/4" Capacity, 10' Squaring Arm, 36" Power Front Operated Backgauge, Manual Blade Gap Adjustment, a/n 1419.

LVD Model 150-JS-10  Hydraulic Press Brake, 10' x 150 Ton Capacity, 10' Overall Width, 8'4" Between Housings, Filler Block, (Note: Currently the CNC unit is out of service, but can be manually operated) 

AMADA Model CSW-220 Power Notcher/Coper, s/n 563438,  8 & 5/8" x 8 & 5/8" x 1/8" Corner Notch Capacity, 2" x 4" x 1/8" Edge Notch Capacity.

WA Whitney Model 626,000   30 Ton Hydraulic Punch, 24" Throat, 10hp Hydraulic Power Unit, s/n 7535.

 

HYD-MECH TILTING ARBOR VERTICAL BANDSAW

HYD-MECH Model VW-18 Tilting Arbor Vertical Bandsaw with Infeed & Outfeed Roller Conveyors, 18' Throat, 18" x 22" capacity @ 90 Degrees,  15" x 18" Capacity @ 45 degrees, Manual Head Tilt.

 

LOWN POWER ROLLS

LOWN Model B400 Initial Pinch Power Rolls, 50" x 12 Gauge Capacity, 4" Diameter Rolls, Manual Drop End.

  

MILLER, LINCOLN & PEER WELDERS

Miller Aluma Power 350 MPa Mig Welder, 208/230/460 V, Single Phase Or Three Phase with    Miller XR-Aluma Feed Wire Feeder & Mig Gun.  s/n ME404300U 

Miller Millermatic 350 P Mig Welder, 200/230/460V Single or Three Phase, s/n NCO23010N

Lincoln Power Mig 350 MP Mig Welder 208/230/460V Single Phase

Miller CP-300 Mig Welder with Miller S-52A Wire Feed Unit, 200/230/460V, Three Phase

Miller CP-300 Mig Welder with Miller S-52A Wire Feed Unit,  200/230/460V, Three Phase 

Miller CP-200 Mig Welder with Miller S-22A Wire Feed Unit, 200/230/460V, Three Phase

Lincoln Power Mig 350 MP, Mig Welder, 208/230/460V, Single Phase.

Peer Model AR-350 Rocker Arm Spot Welder, 50 KVA with Technitron MCS2009 Controller. 

MK Products Cobra Mig 260 Welder, 208/230/460 Single Phase.

  

ACORN TYPE WELDING TABLE

Acorn Type Welding Table made up of Four 59.5" x 70.5" Welding Tables mounted on Single Steel Frame.  Over all Dimensions:  120" x 144" x 37" H.

 

HAMECH & CROWN FORKLIFTS

Hamech Model VL80P Forklift, 7000 lbs. Capacity, 3-Stage Mast, 48" Forks, LP Gas, Pneumatic Cushion Tires, Side Shift.  s/n V811-00330-9875-KF, 

Crown Forklift model C5-1000-40, LP Gas, Hard Smooth Tires, Side Shift, 7218 hrs., 4-stage mast, 48" Forks.

7' Fork Extensions.

AIR COMPRESSORS

Quincy Tank Mounted Horizontal Air Compressor model 5153D12HCB46M, 15 hp, Like NEW, to be sold with Quincy QRHT-75 Refrigerated Air Dryer.

Ingersoll Rand Tank Mounted Air Compressor, 7.5/10hp.

 

FORD PICK-UP TRUCK

2011 Ford F150XLT Pick-up Truck, extended Cab, 4WD, 6' Bed, 6 Cylinder, 3.7 liter gas, Vin:  1FTEX1EM9BFC13340

 

SUPPORT EQUIPMENT

Rigid Model 300 Pipe Threader;  Panduit PBDCT Bench mounted Wiring Duct Cutting Tool

Unline Hydraulic Floor Crane

 Evolution Model S355 MCS, 14" Metal Cutting Mitering Chop Saw on DeWalt Saw Stand.

(3) Portable Warehouse Steps, 4' & 8'. 

Milwaukee Panel Saw, 3.25" max HP, With Dust Collector.

Carts, Vises, (6) Four Shelf Aluminum Carts.

Self Dumping Hoppers.  Port-a-Power, Welding Screens, Welding Clamps,

Pedestal Fans, Portable Steel Tables, Extension Ladder & Step Ladders.

Pallet Shelving, Various heights, Flammable Products storage Cabinets, 

Approx 450 pieces of 1" x 3" x 14' Pine Boards, 

Cantilever Racks with large quantity of Aluminum Raw Stock, U-frame, 90Degree Angle, Square Tube, up to 27' long.

 

NEW PARTS & COMPONENT INVENTORY 

Large Quantity of Parts & Components including Watlow Valves, Pipe Valves, Conduit & Conduit Fittings, Brass & Copper Valves, Suction Accumulators, Solenoid Valves, Filters, liquid line Flilter Dryers, Teflon Seals, Schneider, Electric Circuit equipment, Rotor Fault Limit Switches, Squirrel Cage Fans & Housings, Black Pipe Fittings, Minihelic Gages, New Electric Motors 1.5hp to 5hp.  WEG SSW07 Soft Starters,  Vents, Louvers, Various Heater Elements, Electrical Panels of various size & configuration.  To be sold in larger lots.  Come and Inspect!

  

OFFICE FURNISHINGS 

Desks, Chairs, Filing Cabinets, Conference Room Tables & Chairs, Projector & Screen.  (NO Computer Equipment or Copiers available in this auction)

 

TERMS:  There is an 18%  Buyers Premium in effect for this auction. Everything sells on an "As is, Where is, In Place" basis with NO warranties or guarantees of any kind.  It is the buyer's responsibility to INSPECT BEFORE BIDDING:  Payment is to be made in full within 24 hours of the conclusion of the auction.  Our Payment of choice is "Wire Transfer".   All other items we will accept Cash, Checks, Visa, MC, Discover, American Express. Removal is the Buyers Responsibility, Expense and Risk.  

Removal:  Monday, Tuesday & Wednesday, September 29, 30, & October 1st.

 

To Register to bid, go to:

www.thompsonauctioneers.com or www.bidspotter.com 

 

THOMPSON AUCTIONEERS, INC.

Ohio License #: 63199566109

Steve Thompson, Auctioneer

(937)426-8446

 

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

Terms and Conditions

1. IDENTIFICATION: All participants are required to register prior to becoming an Approved Bidder. All Participants are required to give full name; permanent street address (P.O. Boxes will NOT be accepted or approved); phone number(s); email address, valid credit card and business name. 

Subsequent to registration on BidSpotter, approval to bid is at our discretion. 

2. DEPOSITS: All Online Registrants will be required to submit the requested Information, including: Drivers License Number and valid credit card in order to be Approved. NO EXCEPTIONS.

INTERNATIONAL BUYERS must submit a refundable deposit of $5000 to be approved to bid, or have arrangements made with our office to be Approved to bid.

3. PAYMENT: Invoices must be paid in full after Sale unless otherwise specified. A BUYER`S PREMIUM OF 18% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE.

Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS PROPER EXEMPTION. Business and Personal checks may not be accepted without a letter of verification from your bank. 
NO MERCHANDISE WILL BE RELEASED UNTIL INVOICE IS FULLY PAID.

4. MANNER OF PAYMENT: Invoices will be emailed within 24 hours of the auction end date. If you are the successful bidder, your credit card will be charged as follows: for amounts less than $5000 the entire balance is due immediately; for amounts greater than $5000-a 25% deposit is due immediately and the remaining balance is due within 48 hours either by Cash, Check, Visa, Master Card, Discover or Payment may be made in the form of cash, Check with Bank Letter of Guarantee, Visa, Master Card, or Discover. 

The full purchase price on all lots sold to the same buyer must be paid within the time specified and prior to the removal of any goods. All checks for deposit and balances due shall be payable to the order of Thompson Auctioneers, Inc.

5. REMOVAL: All purchases MUST be removed the during announced or pubilicized removal period.

6. Purchases may be removed only on presentation of paid bill. Removal shall be at the expense, risk and liability of the purchaser. Auctioneer shall not be responsible for goods not removed within the time allowed.

7. CONDITION OF ARTICLES 
SOLD: Neither the auctioneer nor the seller shall be responsible for the correct description, genuineness, authenticity of, or defect in any lot. , Information was has been provided from sources deem reliable and Thompson Auction Company makes no warranty or guarantee as to the accuracy of the information herein contained. No sale shall be set aside nor allowance made on account of any incorrectness, error in cataloging, or any imperfection not noted. DESCRIPTIONS AND PHOTO?S ARE NOT GUARANTEED. PLEASE MAKE YOURSELF AVAILABLE FOR THE OPEN INSPECTION PERIOD. It is the buyer?s responsibility to inspect before bidding.TO AVOID CONFUSION, PARTICIPANTS ARE BIDDING ON ITEMS LISTED IN THE LOT DESCRIPTIONS AND NOT ALL ITEMS SHOWN IN THE PHOTOGRAPHS. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM.

8. SAFETY DEVICES: 
Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is purchaser`s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation.

9. INDEMNIFICATION: 
Purchaser shall defend and indemnify and hold auctioneer and seller harmless from and against all claims and liabilities relating to the condition of, removal of, or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state, and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for proximate or consequential damages, costs or legal expenses arising there from.

10. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT.

11. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled hereto.

12. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser.

13. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.

14. CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, PROPER INSURANCE protecting Thompson Auctioneers, Inc and the people or company that the auctioneers are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for the auctioneer`s protection - NOT FOR THE PURCHASER`S therefore the auctioneer suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the equipment they may be moving for the purchaser.

15. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller willbe served, the auctioneer reserves the right to sell all the property listed, in bulk.

16. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision will be final and absolute.

17. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.

18. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers. 

19. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.

20. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller.