Starrett Surface Plate Grade B Flatness .00017 Grade B 6" Thick 36" x 24" Stands 34" High

6" thick granite slab that is 27" x 36" and is on a angle iron heavy base that measures 43" tall overall.

Grade A Inspection Slab and stand Slab is 6" thick and 24" x 36" Sets on heavy angle iron stand that is 44" tall overall with slab.

6" Granite Test Table 24' x 48' 43" Height

This granite table is not calibrated and stands 39" tall and is 24" x 36" and on a angle iron base.

36" x 28" x 6" Thick 24" x 18" x 3" thick

12" x 12" 4" Thick Flatness .00012 Grade 73

Table has 3/4" steel top that is 30" x 30".  Table lifts to 41" high.  Old vintage piece and very built and operates at is should.

Caliper .001" 505-675 Micrometer .0001" All 3 for ONE MONEY  

Mitutoyo 505-645-509 (2) Mitutoyo 505-675 SPI ALL FOR ONE MONEY

Starrett No. 445 has 4 rods with gauge and plastic box Starrett 436.1 3-4" comes with wood box

Brown & Sharpe 1" Starrett No. 230

Brown & Sharpe 2-3" Outside Micrometer both come with wood boxes

Starrett 436 2" Starrett 436 3"

36 piece set ranging from .0500 to 4.000 THERE ARE 2 PIECES MISSING .500 & 2.000

This set is missing pieces from 100-7/64. This set starts at .050 then runs thru 4.000 (missing few pieces in this sequence) Comes with wooden box

(1) .0610 - .2500 MINUS Set part number 101200400 (1) 1.30mm - 4.98mm MINUS Set Part Number 102200200

(2) Starrett 2-3" No. 436 (1) Starrett 4-5" No. 436

Brown & Sharpe 6" Phase II 5-6" .0001"

Mitutoyo Absolute HDS-H12" Digimatic Heightgage

Mitutoyo 192-140 Mitutoyo 12" Digital Height Gage 192-140

Mitutoyo 24" Digital Height Gage

N.C.K. Hardness Tester Model 3 R C Scale B Scale

Model M 1 .061 to .250 missing around 10 pieces

Suburban Tool MG5-CV-S1 Grinding and Buffing V Block

10 Different Cases of Gage Blocks & Pins and No Go Tools ALL FOR ONE MONEY

36" Wide x 24" Deep 5 1/4" Thick  

(2) Brown & Sharpe 608 Depth Gages (1) Lufkin 514 Depth Gage All have wooden cases and missing some rods

(1) Mitutoyo Depth Gage (1) AMS Depth Gage (1) Craftsman Die Set (1) Pneumatic Wrench (1) LS Starrett 1/2" Outside Micrometer

(1) Mitutoyo 2-3" Outside Micrometer .001 (1) 0-1" Outside Micrometer .001 (1) 3-4" Outside Micrometer .0001

(1) NSK 3-4" Outside Micrometer .0001 (1) Mututoyo 1-2" Outside Micrometer .001

71" Tall x 21" Deep x 24" Wide 5 Shelves

34" Tall x 30" Wide x 28" Deep 5 Drawers

59" Tall x 30" Wide x "28" Deep 11 Ball Bearing Drawers

76 1/2" Tall x 24" Deep x 26 1/2" Wide 6 Drawers 5 Removable Shelves that fits Tooling

Work Table with Built in Tool Chest that has 7 Drawers Also has tall piece for shelves 53" Wide x 30" Deep x 34" Tall

77" Tall x 26" Wide x 24" deep Has locking door and shelves

Approx 20 pieces of railing. ...[more]

This parts rinsing station was used for rinsing coolant from machined parts.  It measures 119" in length and has a Wesco pumping and filtration s...

27" fan with Baldor motor.  3-1.3

Blower Fan

33 1/2" Wide by 25" Deep x 11" Depth

41" Deep x 15" Depth x 34" Wide

20, 30, 40, 50, 90 Amp Breakers

27" Tall x 30" Wide by 40" 1/4 CYD

Manufacturer - Commercial / Industrial: Denison Model: A 2 ton Serial #: 2052 Single Phase  

Manufacturer - Commercial / Industrial: Evolution 355 Model: 355 Serial #: F065S-0147 Condition: Good Nice 14" Steel Chop Saw with vise and stand

Manufacturer - Commercial / Industrial: Chicago Rivet Model: 912D Serial #: 12265 Condition: Good Size:  .098 Jaws  1154 Anvil  1621 Driver  2...

Manufacturer - Commercial / Industrial: Chicago Rivet Model: 912D Serial #: 12266 Condition: Good Size  .125 Jaws  139 Anvil  1170 Driver  1046

Manufacturer - Commercial / Industrial: Chicago Rivet Model: 912D Serial #: 12264 Condition: Good Size  .125 Jaws  893 Anvil  1170 Driver  891

Manufacturer - Commercial / Industrial: Steelman Model: 222EB Serial #: P050110 Convection Phase : 3 KW : 208 Electric : 9 Motor Voltage : 208 Ove...

Manufacturer - Commercial / Industrial: Phase-A-Matic Model: 515 Serial #: 1A03 HP : 15 Volts : 208-230 RPM : 1800

Manufacturer - Commercial / Industrial: L-TEC Model: SVI 300i cvcc 5A-300A Mounted on Rolling Steel Cart

Unit is like new and seller said it had only been used a couple of times.  Matching tooling is being sold in individual lots in the auction. Manu...

Baileigh Industries 1 1/4" Tube Pipe Bender  Very good condition and 75% of all Tooling lots for the Baileigh have ever been used D-1250T-R500-E

Baileigh Industries 1" Tube Pipe Bender D-1000T-R500-TR

Baileigh Industries 1 1/4" Pipe Bender D-1250T-R500-E

Baileigh Industries 3/4" Pipe Bender D-0750T-R275

Baileigh Industries 1 1/2" Pipe Bender D-1500T-R500-E

Baileigh Industries 1 1/4" Pipe Bender D-1250T-R300-E