Featured lot
2013 Doosan Puma 480XL CNC Lathe W/ Fanuc Series 32i-Model A Control; W/ 12-Tool Turret Station; 14-1/2' Thru Hole; W/ Tooling
We found 27 featured lot(s)
Refine your search
Location
Primary Category
Category
Brand
Item Type
Auction Type
Country
State/Province
Auctioneer
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Filtered by:
- Item Type,
- Auction Type
- List
- Grid
-
27 item(s)/page
Featured lot
Lot 101
2011 Doosan Puma 400LC CNC Lathe W/ Fanuc I-Series Control; 12-Tool Turret Station; Machine Wt:
2011 Doosan Puma 400LC CNC Lathe W/ Fanuc I-Series Control; 12-Tool Turret Station; Machine Wt: 10500kg; W/ Ele Work Station
Featured lot
Lot 102
2006 Doosan Puma 300LC CNC Lathe W/ Fanuc Series 2ti-TB Control; 10-Tool Turret Station; Machine Wt:
2006 Doosan Puma 300LC CNC Lathe W/ Fanuc Series 2ti-TB Control; 10-Tool Turret Station; Machine Wt: 6700kgf
Featured lot
Lot 103
2005 Doosan Puma 240LC CNC Lathe W/ Fanuc Series 2ti-TB Control; 10-Tool Turret Station; Machine Wt:
2005 Doosan Puma 240LC CNC Lathe W/ Fanuc Series 2ti-TB Control; 10-Tool Turret Station; Machine Wt: 4.500kgf
Featured lot
Excel SL500/1000 CNC Lathe W/ GE Fanuc Series 18-T Control;W/ 12-Tool Turret Station; W/ Steadyrest & Tooling
Featured lot
2006 Haas SL-20T, CNC Lathe, Chip Auger, Tailstock, Parts Catcher, 16C Collet Chuck, 10 Station Turret, Haas Control, HIL, With 8" 3 Jaw Chuck & T...
Featured lot
mo: 0T-250-UNIV., sn: 152184, date: 1/01, rpm: 5000, v: 50, hz: 60, cntrl circ: ac100v dc24v, Conveyor: sn: A-010034-6, date: 01/11/01. Swing over...
Featured lot
mo: 0T-N-20-UNIV, sn: 132972, date: 3/98, cntrl circ: ac100v dc24v, Conveyor: sn: J 972008-1, date: 03/06/98 Swing over bed: 21.65 inches (550 mm)...
Featured lot
mo: 0T-18N-UNIV, sn: 109305, date: 10/93, v: 230-460, hz: 60, ph: 3, spindle hp: 15 con 20/30 min, amps: 139, Conveyor: sn: J-922152-3, date: 3/18...
Featured lot
Lot 109
2000 HAAS SL-20 CNC LATHE
2000 HAAS SL 20 CNC LATHE, CNC TURNING CENTER BAR CAPACITY: 2IN CHUCK SIZE: 8IN SPINDLE SPEED: 4,000 RPM SPINDLE MOTOR: 10 HP X AXIS TRAVEL: 710I...
Featured lot
Lot 110
2000 HAAS SL-30 CNC LATHE
2000 HAAS SL 30 CNC LATHE, CNC TURNING CENTER BAR CAPACITY: 3IN CHUCK SIZE: 10IN SPINDLE SPEED: 3,400 RPM SPINDLE MOTOR: 30 HP X AXIS TRAVEL: 12....
Featured lot
2018 DMG MORI NLX 2500/700 CNC TURNING CENTER, CNC LATHE, SUBSPINDLE SERIAL# NL257180819 SPECIFICATIONS: MAX. SWING DIAMETER: 36.22IN MAX. TURNING...
Featured lot
Lot 47
2011 HAAS ST-20 CNC Lathe
2011 HAAS ST-20 CNC Lathe, Haas CNC Control, Samchully 8” 3-Jaw Chuck, 20.75” Swing, 21” Max Turning Length, 12-Position Turret, Spindle Speeds to...
Featured lot
Lot 152
TSUGAMI MDL. BZ12LII SLIDING HEADSTOCK CNC LATHE, FANUC LB1 CNC CONTROL, W/ 20' FMB BAR FEED
TSUGAMI MDL. BZ12LII SLIDING HEADSTOCK CNC LATHE, FANUC LB1 CNC CONTROL, W/ 20' FMB MAGAZINE BAR FEED
Featured lot
Lot 40
HAAS SL30T CNC Lathe
Bar Capacity: 3" Chuck Size: 10" Spindle Speed: 3,400 RPM Spindle Motor: 30 HP X Axis Travel: 9.4" Z Axis Travel: 32.5" Rapid Rate Z Axis: 945 IPM...
Featured lot
With SEICOSL MULTI CONTROL, MANUALS, 2" BORE,COOLANT TANK, MANUALS INSIDE MACHINE, 10 POS MACHINE TOOL CHANGER, 4680# 103 X 90 X 85, 620# 46 X 109...
Featured lot
Lot 2105
DAEWOO PUMA 200 CNC LATHE
DAEWOO PUMA 200 CNC LATHE S/N: PM200328 DATE: 1997 SUPPORT SYSTEMS Item Location - West Allis, WI
Featured lot
Lot 132
Fuji 12 in. Model ANW-41T (AL-ANW) Twin Spindle CNC Lathe, S/N: N/A (1999); with Fanuc Series 18-T
Fuji 12 in. Model ANW-41T (AL-ANW) Twin Spindle CNC Lathe, S/N: N/A (1999); with Fanuc Series 18-T CNC Controls, Teach Pendant Controller, (2) 12-...
Featured lot
General Info Location:Stone Mountain, GA Brand:Haas Model:ST-20Y Serial #:3110288 Year:2018 Approx. Shipping Weight:10,800 Lbs. Approx. Shipping ...
Featured lot
General Info Location:Stone Mountain, GA Brand:Okuma Model:LNC-8T Serial #:0903E196 Approx. Shipping Weight:11,000 Lbs. Approx. Shipping Dimensio...
Featured lot
General Info Location:Stone Mountain, GA Brand:Haas Model:ST-10 Serial #:3094960 Year:2013 Approx. Shipping Weight:10,000 Lbs. Approx. Shipping D...
Featured lot
General Info Location:Stone Mountain, GA Brand:Haas Model:SL-30B Serial #:69044 Year:2004 Approx. Shipping Weight:16,000 Lbs. Approx. Shipping Di...
Featured lot
Doosan Lynx 220LMSA CNC Lathe S/N ML0213-000175, 2013, with 6,000-RPM, 6.29" X-Axis Travel, 21.65" Z-Axis Travel, 11.4" Max. Diameter, 20" Max. Le...
Featured lot
Lot 10
Mori Seiki CNC Lathe Model SL-603BMC/1000, S/N 97 (2000), 40.6" Max Swing Over Bed, 35.4" Max Turnin
Mori Seiki CNC Lathe Model SL-603BMC/1000, S/N 97 (2000), 40.6" Max Swing Over Bed, 35.4" Max Turning Diameter, 39.3" Max Turning Length, 24" 3-Ja...
Featured lot
Lot 1
Haas CNC Lathe Model SL-30T, S/N 66165 (2003), 15" Max Turning Diameter, 30" Max Turning Length, 340
Haas CNC Lathe Model SL-30T, S/N 66165 (2003), 15" Max Turning Diameter, 30" Max Turning Length, 3400 Max RPM Spindle Speed, 30 HP Spindle Drive, ...
Featured lot
Lot 2
Haas CNC Lathe Model SL-30T, S/N 65198 (2002), 15" Max Turning Diameter, 30" Max Turning Length, 340
Haas CNC Lathe Model SL-30T, S/N 65198 (2002), 15" Max Turning Diameter, 30" Max Turning Length, 3400 Max RPM Spindle Speed, 30 HP Spindle Drive, ...
Featured lot
Lot 3
Haas CNC Lathe Model SL-20T, S/N 63936 (2001), 10.3" Max Turning Diameter, 20" Max Turning Length, 4
Haas CNC Lathe Model SL-20T, S/N 63936 (2001), 10.3" Max Turning Diameter, 20" Max Turning Length, 4,000 Max RPM Spindle Speeds, 20 HP Spindle Dri...
Loading...-
27 item(s)/page