We found 33 featured lot(s)

Wenzhou ace machinery tiling duratherm mixing tank Model #: ace-jcg-100 100 Liter Capacity Electrical Requirements: Heating: 2.5 KW, Voltage 220V...

Extraction Filtration Unit Model #: HFS 100L Serial #: 3-001019 Electrical Requirements: 420 AC. Phase 1. 60 Hz. 2.89 Max Amps. (ID#:ER.2401-102)

Pacific Steam Equipment Steam generator Model #: BP-300 Serial #: National Board Serial Number: 14458 M Manufacturer's Serial Number:14458 Electr...

CapPlus Technologies 4" Turnkey Softgel Line Including Mixing Tank; Encapsulator; and Tumble Dryer. Model #: S403 Serial #: 1017-013 Electrical R...

Kingreat Disc Separator - For Winterization following Ethanol Extraction Model PDSD3000-M, Rated Capacity 3000 L/h, Product # 23001, Mfg in 2023-...

Pre-Made Pouch line for Gummy Packaging, New in 2024. Manufacturer: PlanIT / Leafy Pack (USA) Model: RotoBagger 2100Serial #: Various per compone...

Hyster N-Series Narrow Aisle Reach Truck, Model N45ZR2, 4500# max cap, 278" max load height. See image of equipment rating plate for full specs.

Tincture & Beverage Shot Line  Line includes Stainless Steel Rotary Feed Table, Aesus Liquid Filler, currently set with 4 nozzles and indexed Conv...

12” Turnkey Softgel Line – High-Speed Setup for Standard or Vgel Softgels Manufacturer: CapPlus Technologies Model: F-150G Serial #: 17U8-FCB-000...

Complete Pharma Packaging Line, including: Pharma Packaging Systems VitaCount 12-1 Softgel/Capsule/Tablet Multi-Channel Lane Counting Machine/Fil...

Bently Nevada vibration scale monitor, model 330016-03-01-00-00-00-00. (Ref:152012}

Pallet of MRO parts, (Ref:152013}

General Electric 350HP Motor, see tag photo for electrical requirements. (Ref:152030}

Park Variable Frequency Drive, model 890SD/5/0030C/B/00/A/US. (Ref:152067}

Eurotherm AC drive, model 590LDC/00/000. (Ref:152071}

12" Promeco Single Screw Extruder, Model PE300, Electrically Heated Barrel, approximately 168" Barrel, Top Feed Section, Side Opening, with 192 kw...

12" Promeco Single Screw Extruder, Model PE300, Electrically Heated Barrel, approximately 168" Barrel, Top Feed Section, Side Opening, with 192 kw...

Blaster Drill with Alan Bradley Panelview 400 Controller (Ref: 148018)

Cincinnati Milacron Model CM92 HP Extruder, 92mm Conical Twin Screw Extruder, 460v, S/N E15A0298015, (1998) (Ref: 148022)

2" Davis Standard Extruder, Model DS-2, Ratio 24:1 L/D, Electrically Heated, Air Cooled, 20 HP AC Motor (Ref: 148025)

Promeco Model KR2600 Single Shaft Shredder, 2600mm (102" wide) Rotor, Ram Feeder, Hydraulically Driven with 350 HP, 460v Hydraulic Power Pack, Fee...

Cincinnati Milacron Model CM80 Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/N E54A0196016 (1996) (Ref: 148030)

Cincinnati Milacron Model E-80 Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/N E54A03000072, (2001) (Ref: 148031)

Cincinnati Milacron Model TC80 HP Extruder, 80mm Conical Twin Screw Extruder, 75 HP DC Motor, S/NE54A0300092, (2011) (Ref: 148033)

Video Jet Laser Coder (Ref: 148039)

CDS Model CCH60-8L, 8" Puller, Cleated Belt, 8" wide x 60" long contact, 1-20 FPM, S/N 400107. (Ref: 148040)

Extrunet America Saw Used (Ref: 148044)

15' CDS Spray Cooling Tank, Stainless Steel, 20" wide x 14" deep (Ref: 148046)

Telesis Tech Model CO30APDS, 30-watt, RF-excited, continuous wave, sealed-tube, CO2 laser marking system, Class 1, ID# ID-5A (Ref: 148048)

Conair Model PC8-84, Puller, Cleated Belt, 8" wide x 84" long contact, 460v, S/N 206156303263 (Ref: 148065)

Herbold Model SMP 45/101-FX9/2-3/2, 90 KW Granulator, 440-480 volt, 60 hertz, 3 phase, 19" diameter x 39" wide rotor, order# 00 0908 5964 (Ref: 14...

Polytruder Model 2.0-24-25, 2" Single Screw Extruder, 24.1, 460v, S/N 231108 (Ref: 4058)

Conair Munters Model D200, Dehumidifier, 460v, S/N 424134 (Ref: 4063)