Hardinge Approximate 11" x 18" Super Precision Toolroom Lathe, Model HLV-H. With Acu-Rite III digita
Hardinge Approximate 11" x 18" Super Precision Toolroom Lathe, Model HLV-H. With Acu-Rite III digital readout & misc. tooling.
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Hardinge Approximate 11" x 18" Super Precision Toolroom Lathe, Model HLV-H. With Acu-Rite III digital readout & misc. tooling.
S/n:43260 LOADING FEE: $6700 INCLUDES disconnects, prep, minimal disassembly and loading only on standard customer provided trucks Please contac...
S/n:43144 LOADING FEE: $6700 INCLUDES disconnects, prep, minimal disassembly and loading only on standard customer provided trucks Please contac...
SFA Glass Lay-Up #2, Assembly and Soldering Machine, S/N: N/A; with Soldering Station with (10) Exso LedSol-300 Digital Lead Free Soldering Contro...
1998 Haas CNC Vertical Machining Center w/ Controls, M/N- VF-4, S/N- 15625, 20 HP Vector Drive, 120"x120"x96"
2022 DN Solutions NHP 5000 Machining Center, S/N MH0029-000678, Power Source AC 220, Rated Capacity 83.87 KVA, 50 HP, LNS Chip Conveyor, 120-Posit...
2014 Doosan Infracore Horizontal Boring & Milling Machine, Model DBC13011, S/N MB0003-000448, Power Source AC 220, Sangwoo Chip Conveyor, Model DB...
2008 Doosan Infracore Turning Center, Model PUMA240B, S/N PM244151, Power Source AC 200/220-Volt, PE 50/60 HZ, w/ LNS Hydrobar Bar Feeder
2013 Flow Dynamics Cutting Head Waterjets, 26' L x 10' W, Waterjet Model HYPER JET 100, WBC, S/N 513-14239, 480-Volt, 1.3 Gallon Per Minute, Max. ...
OMAX 2080 Maxiem Waterjet, S/N M20805010 (LOCATED IN BLDG. 1)
Swing Over Bed 13.75", Bedway Width 12.5", Distance Between Centers 50", Spindle Speed 15-3250 RPM, Approximate Dimensions 99" x 44" x 63", Acu-Ri...
SWI Trak Model 1840SX CNC Lathe, s/n 074C016033, 2-Axis, with Prototrak SLX CNC Control, 18" X 40" Capacity, 10" 3-Jaw Chuck
64" Bullard Cutmaster Vertical Turret Lathe Boring Mill, 64" Table with 4 boring mill jaws, 72" max swing with side head below table, 54" under cr...
5" Giddings & Lewis Fraser Table Type Horizontal Boring Mill, S/N 150-944, 5" spindle, 96” x 60” table, 84” Cross travel, 60” table in and out, 72...
Olympia V 60 CNC Vertical Lathe, S/N OE 2001-398, 66" built in 4 jaw chuck, 72" max turning dia., 84" max turning height, 80 HP main spindle drive...
Toshiba TUE-15 CNC Vertical Lathe, 59" chuck, 70" max. turning dia., 59" max turning height, 35" ram travel, max 300 rpm, 60 HP main spindle, 12 p...
New Century CNC Vertical Lathe, , 120" chuck, 126" max. turning dia., 120" max turning height, 0-140 RPM, Heavy Duty Octagonal Ram, 90" X travel, ...
Amera Seiki Bridgemill, Model VB3 CNC Vertical Machining Center VMC, 65" x 126" table, 126" X axis travel, 79" Y axis travel, 40" Z axis travel wi...
2012 Toyoda Model SB-216 CNC Bridge Mill, VMC 59" X 78" table, 66" between columns, 83" X travel, 63" Y travel, 39" Z axis travel, CAT 50 spindle,...
Hurco VM10HSI (2018) Vertical Machining Center X,Y,Z Axis Travel 26'' x 16'' x 20'' T Slot Size 3 x .71 Table Size 30'' x 16'' Max Weight on Tab...
YCM NXV 1680A (2016) Vertical Machining Center X-axis Travel 64.2"Y-axis Travel 30"Z-axis Travel 27.6"Spindle Speed 12,000rpmSpindle Power 25 (25/...
Haas VF4SS Vertical Machining Center (2021) X Axis 50.00 inY Axis 20.00 inZ Axis 25.00 inSpindle Nose to Table (~ max) 29.2 inSpindle Nose to ...
Haas UMC750 Vertical Machining Center (2020) X Axis: 30″Y Axis: 20″Z Axis: 20″B Axis Travel: 120 ° to 35- °C Axis Travel: 360 °Spindle Speed: 10...
2008 - Clausing Mdl. CKE6156Z/1500 CNC Lathe, 22" Swing, 60" Between Centers, 13" Swing over Carriage, Spindle Speeds 7 to 2200 RPM, 12" Diameter ...
2004 FLOW CSI WATER JET WITH INTEGRATED FLYING BRIDGE 6012 PUMP OUTPUT:55,000 PSI Z: 8" TABLE SIZE-W: 6' TABLE SIZE-L: 12 MAXIMUM PRESSURE: 55K C...
General Info Brand:Hypertherm Model:Powermax125 Serial #:125-016159 Year:2021 Approx. Shipping Weight:150 Lbs. Approx. Shipping Dimensions:4′ L x...
Mazak Variaxis I-500 Simultaneous 5-Axis Vertical Machining Center; 18,000rpm HSK63 Spindle; 60 ATC; X-Axis Travel: 350mm, Y-Axis Travel: 550mm, Z...
axis travel:50"Y axis travel:20"Z axis travel:25"Rapid rate x axis:1,400 IPMRapid rate y axis:1,400 IPMRapid rate z axis:1,400 IPMMax table load:1...
Specifications: TRAVELS - X AXIS: 30" - Y AXIS: 16" - Z AXIS: 20" MAX TABLE LOAD: 3,000 LBS SPINDLE MOTOR: 20 HP SPINDLE SPEED: 8,100 RPM SPIN...
Table size:36"x14" Maximum table load:3,000 lbs X-axis travel:30" Y-axis travel:16" Z-axis travel:20" Distance spindle nose to table top: 4"-24"Sp...
:Haas CNC Control 12000 RPM Inline Direct Drive Spindle 24 Station Super Speed Side Mount Tool changer 1400 IPM Fast Rapid Renishaw Probing Ready ...
X Axis Travel: 40"Y Axis Travel: 20"Z Axis Travel: 25"Rapid Rate X Axis: 710 IPMRapid Rate Y Axis: 710 IPMRapid Rate Z Axis: 710 IPMTable Size: 48...
X axis travel:20" Y axis travel:16 "Z axis travel:20" Rapid rate x axis:710 IPM Rapid rate y axis:710 IPM Rapid rate z axis:710 IPM Max table load...
Type of CNC Control Bridgeport BPCT CNC Control Max Swing Over Ways17" Max Swing Over Cross Slide8" Chuck Size8" Max Distance Between Centers40" X...
Bridgeport 3 axis CNC Knee Mill Equipped with Bridgeport CNC Control Torque-Rite
2016 Nomura NN-20UB8 CNC Swiss Lathe (SN: 200091401); 0.79" Machining Diameter; 0.79" Machining Length; Max Part Unload Length: 4.13"; 0.79" Bore...
2014 Haas VF3 CNC Vertical Mill, S/N 1111768
2014 Haas VF6/50 CNC Vertical Mill, S/N 111577
2012 Haas VF4SS CNC Vertical Mill, S/N 1096868
2013 Haas GR510 CNC Gantry Mill, S/N 1108491
Haas CNC Lathe Model SL-30T, S/N 66165 (2003), 15" Max Turning Diameter, 30" Max Turning Length, 3400 Max RPM Spindle Speed, 30 HP Spindle Drive, ...
Haas CNC Lathe Model SL-30T, S/N 65198 (2002), 15" Max Turning Diameter, 30" Max Turning Length, 3400 Max RPM Spindle Speed, 30 HP Spindle Drive, ...
Haas CNC Lathe Model SL-20T, S/N 63936 (2001), 10.3" Max Turning Diameter, 20" Max Turning Length, 4,000 Max RPM Spindle Speeds, 20 HP Spindle Dri...
Haas CNC Vertical Machining Center Model VF-3B, S/N 32685 (2003), 48"x 18" T-Slotted Table, 40 Taper Spindle, Haas VOP-D, 20 HP 2-Speed Gear Drive...
Haas CNC Vertical Machining Center Model VF-0, S/N 22384 (2000), 26" x 14" T-Slotted Table, 40 Taper Spindle, 20 HP Vector Dual Drive, 20 Automati...
Haas CNC Vertical Machining Center Model Mini-Mill, S/N 23270 (2000)
LIKE NEW Geka 80-Ton Ironworker Model Hydracrop 80/A, S/N 14781 (2006), 5" x 5" x 1/2" Angle Capacity, 18" x 5/8" Flats Capacity, 1 3/4" Solid Rou...
Bridgeport 2-HP Series 1 Vertical Mill, 5" Spindle Stroke, 42" x 9" T-slot Table, with Power Table Feeds and Assorted Collets
Hercules Ajax Mazak 18 18" x 60" Engine Lathe, S/N 10682, 18" Swing Over Bed, 60" Between Centers, 10 1/8" Swing Over Cross Slide, 25 1/8" Swing O...
Dyna Industrial Pipe Plasma Cutter 8" - 24" Diameter, 7/8" Max wall thickness, 1 cutting head, Hypertherm Powermax 125 torch, input power 460V / 3...
T-Tech Quick Circuit J5 100 / 32 PCB Prototyping System ; 3-Axis Motion Control w/ Over 3" of Vertical Travel, Automatic Tool Change w/ 32 Positio...
2019 Porta Solutions "Multicenter 3Mandrini" 3-Spindle Machining Center ; Fanuc Panel i Control, (3) Independent ISO40 Spindles @ 6000 Max RPM Eac...