Search for lots

Recent searches

    Clear all

    Suggested searches

      Sign in
      Register
      notifications_none notifications Alerts
      • Home
      • Featured Lots

      We found 39 featured lot(s)

      Refine your search

      Lots with images only

      Estimate

      Filter by Price Range
      Show only bulk lots

      Location

      Primary Category

      Sorry, no results were found for 'Search text here'. Please try another search

      Category

      Sorry, no results were found for 'Search text here'. Please try another search

      Brand

      Sorry, no results were found for 'Search text here'. Please try another search

      Item Type

      Sorry, no results were found for 'Search text here'. Please try another search

      Auction Type

      Sorry, no results were found for 'Search text here'. Please try another search

      Country

      Sorry, no results were found for 'Search text here'. Please try another search

      State/Province

      Sorry, no results were found for 'Search text here'. Please try another search

      Auctioneer

      Sorry, no results were found for 'Search text here'. Please try another search
      • Corporate Assets Inc. (39)
      Remove filter

      Filtered by:

      • Auctioneer
      • List
      • Grid
      • 39 item(s)
        /page
      Featured lot
      Lot 1

      MANITOU APPROX. 6000 LB. CAPACITY DIESEL ROUGH TERRAIN FORKLIFT WITH 3-STAGE MAST, 3297 HOURS (

      1MANITOU APPROX. 6000 LB. CAPACITY DIESEL ROUGH TERRAIN FORKLIFT WITH 3-STAGE MAST, 3297 HOURS (
      Corporate Assets Inc.

      MANITOU APPROX. 6000 LB. CAPACITY DIESEL ROUGH TERRAIN FORKLIFT WITH 3-STAGE MAST, 3297 HOURS (RECORDED ON METER AT TIME OF LISTING), S/N: 201458 ...

      Featured lot
      Lot 4

      TOYOTA/MPI (2011) LAND CRUISER HZJ76L UNDERGROUND CARRIER WITH 6-CYLINDER HZ-0680214 ENGINE,

      4TOYOTA/MPI (2011) LAND CRUISER HZJ76L UNDERGROUND CARRIER WITH 6-CYLINDER HZ-0680214 ENGINE,
      Corporate Assets Inc.

      TOYOTA/MPI (2011) LAND CRUISER HZJ76L UNDERGROUND CARRIER WITH 6-CYLINDER HZ-0680214 ENGINE, MANUAL TRANSMISSION, VIN: MPI-1097 (CMD-406-25)

      Featured lot
      Lot 11

      FREIGHTLINER (2007) BUSINESS CLASS M2 TANDEM-AXLE 4-DOOR POLE TRUCK WITH MERCEDES BENZ DIESEL

      11FREIGHTLINER (2007) BUSINESS CLASS M2 TANDEM-AXLE 4-DOOR POLE TRUCK WITH MERCEDES BENZ DIESEL
      Corporate Assets Inc.

      FREIGHTLINER (2007) BUSINESS CLASS M2 TANDEM-AXLE 4-DOOR POLE TRUCK WITH MERCEDES BENZ DIESEL ENGINE, TEREX COMMANDER C5050 TRUCK-MOUNTED HYDRAULI...

      Featured lot
      Lot 47

      INGERSOLL RAND SIERRAH125W 125 HP ROTARY SCREW AIR COMPRESSOR WITH DIGITAL CONTROL, 125 PSIG RATED

      47INGERSOLL RAND SIERRAH125W 125 HP ROTARY SCREW AIR COMPRESSOR WITH DIGITAL CONTROL, 125 PSIG RATED
      Corporate Assets Inc.

      INGERSOLL RAND SIERRAH125W 125 HP ROTARY SCREW AIR COMPRESSOR WITH DIGITAL CONTROL, 125 PSIG RATED OPERATING PRESSURE, S/N: TS3458U07016 (CI) (CMD...

      Featured lot
      Lot 98

      CUBEX ORION ITH TRACK-MOUNTED CRAWLER DRILL WITH APPROX. 3.5” TO 17.5” HOLE DIAMETER, APPROX. 300’

      98CUBEX ORION ITH TRACK-MOUNTED CRAWLER DRILL WITH APPROX. 3.5” TO 17.5” HOLE DIAMETER, APPROX. 300’
      Corporate Assets Inc.

      CUBEX ORION ITH TRACK-MOUNTED CRAWLER DRILL WITH APPROX. 3.5” TO 17.5” HOLE DIAMETER, APPROX. 300’ HOLE LENGTH, COMPACT BOOM, 388 DRILL HOURS (REC...

      Featured lot
      Lot 101

      MINECAT (2011) FL6000A 6000 LB. CAPACITY FORKLIFT LOADER WITH 76” MAX. LIFT HEIGHT, 2-STAGE MAST,

      101MINECAT (2011) FL6000A 6000 LB. CAPACITY FORKLIFT LOADER WITH 76” MAX. LIFT HEIGHT, 2-STAGE MAST,
      Corporate Assets Inc.

      MINECAT (2011) FL6000A 6000 LB. CAPACITY FORKLIFT LOADER WITH 76” MAX. LIFT HEIGHT, 2-STAGE MAST, 4X4, 1492 HOURS (RECORDED ON METER AT TIME OF LI...

      Featured lot
      Lot 102

      MINECAT UNDERGROUND TRACTOR/CARRIER WITH HYDRAULIC SCISSOR LIFT PLATFORM, 1604 HOURS (RECORDED ON

      102MINECAT UNDERGROUND TRACTOR/CARRIER WITH HYDRAULIC SCISSOR LIFT PLATFORM, 1604 HOURS (RECORDED ON
      Corporate Assets Inc.

      MINECAT UNDERGROUND TRACTOR/CARRIER WITH HYDRAULIC SCISSOR LIFT PLATFORM, 1604 HOURS (RECORDED ON METER AT TIME OF LISTING), S/N: N/A (CMD-417-25)...

      Featured lot
      Lot 103

      SANDVIK (2013) PT50 TRACK-MOUNTED DRILL PIPE HANDLER WITH APPROX. 4’-6’ DRILL PIPE LENGTH, APPROX.

      103SANDVIK (2013) PT50 TRACK-MOUNTED DRILL PIPE HANDLER WITH APPROX. 4’-6’ DRILL PIPE LENGTH, APPROX.
      Corporate Assets Inc.

      SANDVIK (2013) PT50 TRACK-MOUNTED DRILL PIPE HANDLER WITH APPROX. 4’-6’ DRILL PIPE LENGTH, APPROX. 60” PIPE MANIPULATOR ON HIAB (2013) 008T LOADER...

      Featured lot
      Lot 105

      TAMROCK TORO 40 UNDERGROUND ARTICULATING HAULAGE TRUCK WITH 40,000 KG. LOAD CAPACITY, 24YD³ DUMP BOX

      105TAMROCK TORO 40 UNDERGROUND ARTICULATING HAULAGE TRUCK WITH 40,000 KG. LOAD CAPACITY, 24YD³ DUMP BOX
      Corporate Assets Inc.

      TAMROCK TORO 40 UNDERGROUND ARTICULATING HAULAGE TRUCK WITH 40,000 KG. LOAD CAPACITY, 24YD³ DUMP BOX CAPACITY, 62 DEG. MAX. DUMPING ANGLE, DIESEL ...

      Featured lot
      Lot 1

      MILLER MILLERMATIC 25O PORTABLE MIG WELDER WITH CABLES & GUN, S/N KE673800

      1MILLER MILLERMATIC 25O PORTABLE MIG WELDER WITH CABLES & GUN, S/N KE673800
      Corporate Assets Inc.

      MILLER MILLERMATIC 25O PORTABLE MIG WELDER WITH CABLES & GUN, S/N KE673800

      Featured lot
      Lot 7

      FIRST LC-185 VS VERTICAL MILLING MACHINE WITH 10”X50” TABLE, SPEEDS TO 4,500 RPM, HEIDENHAIN 2-AXIS

      7FIRST LC-185 VS VERTICAL MILLING MACHINE WITH 10”X50” TABLE, SPEEDS TO 4,500 RPM, HEIDENHAIN 2-AXIS
      Corporate Assets Inc.

      FIRST LC-185 VS VERTICAL MILLING MACHINE WITH 10”X50” TABLE, SPEEDS TO 4,500 RPM, HEIDENHAIN 2-AXIS DRO, 3 HP, 575V/3PH/60HZ, S/N 10604654 (VISE N...

      Featured lot
      Lot 13

      BROWN & SHARPE 618 MICROMASTER SURFACE GRINDER WITH 6”X18” MAGNETIC CHUCK, 8” X ¾” X 1-1/4” GRINDING

      13BROWN & SHARPE 618 MICROMASTER SURFACE GRINDER WITH 6”X18” MAGNETIC CHUCK, 8” X ¾” X 1-1/4” GRINDING
      Corporate Assets Inc.

      BROWN & SHARPE 618 MICROMASTER SURFACE GRINDER WITH 6”X18” MAGNETIC CHUCK, 8” X ¾” X 1-1/4” GRINDING WHEEL, REX 9 KVA TRANSFORMER, 460V/3PH/60HZ, ...

      Featured lot
      Lot 14

      BROWN & SHARPE NO. 2 UNIVERSAL CYLINDRICAL GRINDER WITH 14” MAIN GRINDING WHEEL, COOLANT, S/N 521-21

      14BROWN & SHARPE NO. 2 UNIVERSAL CYLINDRICAL GRINDER WITH 14” MAIN GRINDING WHEEL, COOLANT, S/N 521-21
      Corporate Assets Inc.

      BROWN & SHARPE NO. 2 UNIVERSAL CYLINDRICAL GRINDER WITH 14” MAIN GRINDING WHEEL, COOLANT, S/N 521-216 (CI)

      Featured lot
      Lot 15

      KEIYO-COLEX KF-1000 ENGINE LATHE WITH 18” SWING OVER BED, 40” DISTANCE BETWEEN CENTERS, SPEEDS TO 16

      15KEIYO-COLEX KF-1000 ENGINE LATHE WITH 18” SWING OVER BED, 40” DISTANCE BETWEEN CENTERS, SPEEDS TO 16
      Corporate Assets Inc.

      KEIYO-COLEX KF-1000 ENGINE LATHE WITH 18” SWING OVER BED, 40” DISTANCE BETWEEN CENTERS, SPEEDS TO 1600 RPM, 8” 3-JAW CHUCK, COOLANT, INCH/METRIC T...

      Featured lot
      Lot 16

      STARTRITE 600 H225W HORIZONTAL BANDSAW WITH 10”X20” CAPACITY, 2 HP MOTOR, BLADE SPEEDS TO 300 FPM, 5

      16STARTRITE 600 H225W HORIZONTAL BANDSAW WITH 10”X20” CAPACITY, 2 HP MOTOR, BLADE SPEEDS TO 300 FPM, 5
      Corporate Assets Inc.

      STARTRITE 600 H225W HORIZONTAL BANDSAW WITH 10”X20” CAPACITY, 2 HP MOTOR, BLADE SPEEDS TO 300 FPM, 575V/3PH/60HZ, S/N 120027 (CI)

      Featured lot
      Lot 17

      LETEN PLCM-400A VERTICAL POWER BAND SAW WITH 15.75” CUTTING CAPACITY, 2 HP MOTOR, 23.5” X 19.5” TABL

      17LETEN PLCM-400A VERTICAL POWER BAND SAW WITH 15.75” CUTTING CAPACITY, 2 HP MOTOR, 23.5” X 19.5” TABL
      Corporate Assets Inc.

      LETEN PLCM-400A VERTICAL POWER BAND SAW WITH 15.75” CUTTING CAPACITY, 2 HP MOTOR, 23.5” X 19.5” TABLE, BLADE WELDER, 220V/3PH/60HZ, S/N 400007 (CI)

      Featured lot
      Lot 18

      BLOW PRESS NO. 5 C-FRAME MECHANICAL PUNCH PRESS WITH 19”X29” BED, 12”X19” RAM, S/N N/A (CI)

      18BLOW PRESS NO. 5 C-FRAME MECHANICAL PUNCH PRESS WITH 19”X29” BED, 12”X19” RAM, S/N N/A (CI)
      Corporate Assets Inc.

      BLOW PRESS NO. 5 C-FRAME MECHANICAL PUNCH PRESS WITH 19”X29” BED, 12”X19” RAM, S/N N/A (CI)

      Featured lot
      Lot 34

      SHIMANA SHGX0C072 12” OPTICAL COMPARATOR, 110V/1PH/60HZ, S/N AB0498

      34SHIMANA SHGX0C072 12” OPTICAL COMPARATOR, 110V/1PH/60HZ, S/N AB0498
      Corporate Assets Inc.

      SHIMANA SHGX0C072 12” OPTICAL COMPARATOR, 110V/1PH/60HZ, S/N AB0498

      Featured lot
      Lot 205A

      HONDA (2000) SHADOW TOURING 1,100CC MOTORCYCLE WITH DIRECT DRIVESHAFT, ALUMINUM RIMS, HARD STORAGE B

      205AHONDA (2000) SHADOW TOURING 1,100CC MOTORCYCLE WITH DIRECT DRIVESHAFT, ALUMINUM RIMS, HARD STORAGE B
      Corporate Assets Inc.

      HONDA (2000) SHADOW TOURING 1,100CC MOTORCYCLE WITH DIRECT DRIVESHAFT, ALUMINUM RIMS, HARD STORAGE BOXES, 22,758 KM (RECORDED ON METER AT TIME OF ...

      Featured lot
      Lot 1

      POTISJE PA30 GAP BED ENGINE LATHE WITH 12” 3 JAW CHUCK, 26” SWING, 32” SWING IN THE GAP, 124” IN BET

      1POTISJE PA30 GAP BED ENGINE LATHE WITH 12” 3 JAW CHUCK, 26” SWING, 32” SWING IN THE GAP, 124” IN BET
      Corporate Assets Inc.

      POTISJE PA30 GAP BED ENGINE LATHE WITH 12” 3 JAW CHUCK, 26” SWING, 32” SWING IN THE GAP, 124” IN BETWEEN CENTERS, 124” IN BETWEEN CENTERS, 3 ½” BO...

      Featured lot
      Lot 46

      HAAS VF6B CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 64” X 28” T-SLOT TABLE, TRAVELS X – 6

      46HAAS VF6B CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 64” X 28” T-SLOT TABLE, TRAVELS X – 6
      Corporate Assets Inc.

      HAAS VF6B CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 64” X 28” T-SLOT TABLE, TRAVELS X – 64”, Y – 32”, Z – 30”, SPINDLE SPEEDS TO 6000RP...

      Featured lot
      Lot 50

      LEADWELL VD40 CNC VERTICAL MACHINING CENTER WITH FANUC 21M CNC CONTROL, 47” X 19” T-SLOT TABLE, TRAV

      50LEADWELL VD40 CNC VERTICAL MACHINING CENTER WITH FANUC 21M CNC CONTROL, 47” X 19” T-SLOT TABLE, TRAV
      Corporate Assets Inc.

      LEADWELL VD40 CNC VERTICAL MACHINING CENTER WITH FANUC 21M CNC CONTROL, 47” X 19” T-SLOT TABLE, TRAVELS X – 40.2”, Y – 20.1”, Z - 20.1”, SPINDLE S...

      Featured lot
      Lot 93

      HARDINGE QUEST 6/42 CNC TURNING CENTER WITH FANUC 21I-T CNC CONTROL, COLLET CHUCK, 20.44” SWING OVER

      93HARDINGE QUEST 6/42 CNC TURNING CENTER WITH FANUC 21I-T CNC CONTROL, COLLET CHUCK, 20.44” SWING OVER
      Corporate Assets Inc.

      HARDINGE QUEST 6/42 CNC TURNING CENTER WITH FANUC 21I-T CNC CONTROL, COLLET CHUCK, 20.44” SWING OVER BED, 12.15 MAX TURNING DIAMETER, TRAVELS X – ...

      Featured lot
      Lot 98

      MAZAK QUICKTURN NEXUS 200 II CNC TURNING CENTER WITH MAZATROL MATRIX CNC CONTROL, 8” HYDRAULIC CHUCK

      98MAZAK QUICKTURN NEXUS 200 II CNC TURNING CENTER WITH MAZATROL MATRIX CNC CONTROL, 8” HYDRAULIC CHUCK
      Corporate Assets Inc.

      MAZAK QUICKTURN NEXUS 200 II CNC TURNING CENTER WITH MAZATROL MATRIX CNC CONTROL, 8” HYDRAULIC CHUCK, 13.78” MAX TURNING DIAMETER, 46.06” MAX TURN...

      Featured lot
      Lot 99

      LEADWELL LT20 CNC TURNING CENTER WITH FANUC SERIES 0-T CNC CONTROL, 10” 3 JAW HYDRAULIC CHUCK, 26.3

      99LEADWELL LT20 CNC TURNING CENTER WITH FANUC SERIES 0-T CNC CONTROL, 10” 3 JAW HYDRAULIC CHUCK, 26.3
      Corporate Assets Inc.

      LEADWELL LT20 CNC TURNING CENTER WITH FANUC SERIES 0-T CNC CONTROL, 10” 3 JAW HYDRAULIC CHUCK, 26.3 SWING OVER BED, 17.7” MAX TURNING DIAMETER, 25...

      Featured lot
      Lot 100

      MAZAK QUICKTURN 20 CNC TURNING CENTER WITH MAZATROL T PLUS CNC CONTROL, COLLET CHUCK, 17.32” SWING O

      100MAZAK QUICKTURN 20 CNC TURNING CENTER WITH MAZATROL T PLUS CNC CONTROL, COLLET CHUCK, 17.32” SWING O
      Corporate Assets Inc.

      MAZAK QUICKTURN 20 CNC TURNING CENTER WITH MAZATROL T PLUS CNC CONTROL, COLLET CHUCK, 17.32” SWING OVER BED, 11.8” MAX TURNING DIAMETER, 19.68” MA...

      Featured lot
      Lot 102

      HARDINGE CHNCIII CNC PRECISION LATHE WITH GE FANUC CNC CONTROL, COLLET CHUCK, 8 STATION TURRET, SWIN

      102HARDINGE CHNCIII CNC PRECISION LATHE WITH GE FANUC CNC CONTROL, COLLET CHUCK, 8 STATION TURRET, SWIN
      Corporate Assets Inc.

      HARDINGE CHNCIII CNC PRECISION LATHE WITH GE FANUC CNC CONTROL, COLLET CHUCK, 8 STATION TURRET, SWINGS 28”, TRAVELS X - 3.1”, Z – 12.5”, SPEEDS TO...

      Featured lot
      Lot 105

      GILDEMEISTER N.E.F 480 CNC LATHE WITH FAGOR RETROFIT CNC CONTROL, 12” 3 JAW CHUCK, 20” SWING, 80” IN

      105GILDEMEISTER N.E.F 480 CNC LATHE WITH FAGOR RETROFIT CNC CONTROL, 12” 3 JAW CHUCK, 20” SWING, 80” IN
      Corporate Assets Inc.

      GILDEMEISTER N.E.F 480 CNC LATHE WITH FAGOR RETROFIT CNC CONTROL, 12” 3 JAW CHUCK, 20” SWING, 80” IN BETWEEN CENTERS, 2” BORE, SPEEDS TO 2240RPM S...

      Featured lot
      Lot 112

      CAT P5000 LPG OUTDOOR FORKLIFT WITH 4900LBS MAX CAPACITY, 131” MAX REACH, 3 STAGE HIGH VISIBILITY MA

      112CAT P5000 LPG OUTDOOR FORKLIFT WITH 4900LBS MAX CAPACITY, 131” MAX REACH, 3 STAGE HIGH VISIBILITY MA
      Corporate Assets Inc.

      CAT P5000 LPG OUTDOOR FORKLIFT WITH 4900LBS MAX CAPACITY, 131” MAX REACH, 3 STAGE HIGH VISIBILITY MAST, SIDE SHIFT, OUTDOOR CUSHION TIRES, 14,700H...

      Featured lot
      Lot 9

      MITUTOYO (2019) CRYSTA-APEX S574 CMM WITH MICAT PC BASED CONTROL, MITUTOYO JSBOX-M PENDANT CONTROL,

      9MITUTOYO (2019) CRYSTA-APEX S574 CMM WITH MICAT PC BASED CONTROL, MITUTOYO JSBOX-M PENDANT CONTROL,
      Corporate Assets Inc.

      MITUTOYO (2019) CRYSTA-APEX S574 CMM WITH MICAT PC BASED CONTROL, MITUTOYO JSBOX-M PENDANT CONTROL, RENISHAW PH10MQ TOUCH PROBE, RENISHAW PH10-3 P...

      Featured lot
      Lot 13

      HAAS (2019) ST-30 CNC TURNING CENTER WITH HAAS CNC CONTROL, SAMCHULLY 12” 3-JAW HYDRAULIC CHUCK, 21”

      13HAAS (2019) ST-30 CNC TURNING CENTER WITH HAAS CNC CONTROL, SAMCHULLY 12” 3-JAW HYDRAULIC CHUCK, 21”
      Corporate Assets Inc.

      HAAS (2019) ST-30 CNC TURNING CENTER WITH HAAS CNC CONTROL, SAMCHULLY 12” 3-JAW HYDRAULIC CHUCK, 21” SWING OVER BED, 15” MAX. CUTTING DIAMETER, 32...

      Featured lot
      Lot 15

      HAAS (2020) 4’ BAR FEEDER, S/N: 97015 (CI)

      15HAAS (2020) 4’ BAR FEEDER, S/N: 97015 (CI)
      Corporate Assets Inc.

      HAAS (2020) 4’ BAR FEEDER, S/N: 97015 (CI)

      Featured lot
      Lot 18

      HAAS (2019) UMC-1000 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 25”

      18HAAS (2019) UMC-1000 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 25”
      Corporate Assets Inc.

      HAAS (2019) UMC-1000 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 25” DIAMETER T-SLOT TRUNNION TABLE, TRAVELS: X- 40”; Y...

      Featured lot
      Lot 20

      HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”

      20HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”
      Corporate Assets Inc.

      HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5” DIAMETER T-SLOT TRUNNION TABLE, TRAVELS: X-24”; Y...

      Featured lot
      Lot 22

      HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”

      22HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”
      Corporate Assets Inc.

      HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5” DIAMETER T-SLOT TRUNNION TABLE, TRAVELS: X-24”; Y...

      Featured lot
      Lot 24

      HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”

      24HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”
      Corporate Assets Inc.

      HAAS (2022) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5” DIAMETER T-SLOT TABLE, TRAVELS: X-24”; Y-16”; Z-1...

      Featured lot
      Lot 26

      HAAS (2021) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”

      26HAAS (2021) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5”
      Corporate Assets Inc.

      HAAS (2021) UMC-500 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH HAAS CNC CONTROL, 15.5” DIAMETER T-SLOT TRUNNION TABLE, TRAVELS: X-24”; Y...

      Featured lot
      Lot 133

      ATLAS COPCO (2022) GA11FF 15 HP ROTARY SCREW AIR COMPRESSOR WITH 128 MAX. PSI, 3931 HRS (RECORDED ON

      133ATLAS COPCO (2022) GA11FF 15 HP ROTARY SCREW AIR COMPRESSOR WITH 128 MAX. PSI, 3931 HRS (RECORDED ON
      Corporate Assets Inc.

      ATLAS COPCO (2022) GA11FF 15 HP ROTARY SCREW AIR COMPRESSOR WITH 128 MAX. PSI, 3931 HRS (RECORDED ON METER AT TIME OF LISTING) S/N: ITJ642909 (CI)...

      Featured lot
      Lot 135

      TOYOTA 5FGCU25 5000 LB. CAPACITY LPG FORKLIFT WITH 210” MAX. LIFT HEIGHT, 3-STAGE HIGH VISIBILITY

      135TOYOTA 5FGCU25 5000 LB. CAPACITY LPG FORKLIFT WITH 210” MAX. LIFT HEIGHT, 3-STAGE HIGH VISIBILITY
      Corporate Assets Inc.

      TOYOTA 5FGCU25 5000 LB. CAPACITY LPG FORKLIFT WITH 210” MAX. LIFT HEIGHT, 3-STAGE HIGH VISIBILITY MAST, SIDE SHIFT, CUSHION TIRES, 5912 HRS (RECOR...

      Loading...Loading...
      • 39 item(s)
        /page

      Recently Viewed Lots