We found 77 featured lot(s)

Elumatec 5-axis Profile Machining Center, mod. SBZ122/75, ser. no. 1220099583 (2018), approx. 17.5 ft. c/w Hydrapedia VWK7/1-S chiller [Loc. Fabri...

Emmegi Gantry Profile Machining Centre (5-axis, 10.5m), mod. Satellite XT10500, ser. no. 0117374, Approx. 16,356 running hours, approx. 56 ft. w/ ...

Elumatec 4-Axis Profile Machining Center, mod. SBZ628, ser. no. 6280028115 (2016), w/ touch screen controls, infeed/outfeed conveyors, chip convey...

Elumatec Auto-Feeding Saw, mod. SA142/35, ser. no. 30018, w/ mobile dust collector, 12 in. x 120 in. infeed/outfeed conveyor [Loc. Fabrication]

HAAS CNC Machining Center, mod. VF-4SS, ser. no. 1111568, w/ 24-position tool changer c/w coolant pump, 45 kva transformer (excl. rotary table) [L...

HAAS Indexing Rotary Table, mod. TR210, ser. no. 905973 [Loc. Fabrication]

Atlas Copco Compressor, mod. GA37VSDs FF , ser. no. API476906, 575V, 60 Hz, 3-Ph, NEW in crate (2025) [Loc. Fabrication]

Hino Flat Deck Truck, mod. 338, 26 ft., dual rears, (2) J-Box tool boxes, Eagle pull-back tarp [Loc. Mat. Hand.]

Toyota Fork Lift Truck, mod. 02-7FG30, ser. no. 11536, LPG, 10,100 hrs., 5,000 lbs, cap., 185 in. lift height, 3-stage, Cascade side-shift/fork-po...

CombiLift Multi-Directional Fork Lift Truck, mod. Dura-Lift STE, ser. no. 74476 (2023), 72V., 1,734 Hrs., 5,000 lbs, cap., 236 in. lift height c/w...

Genie Boom Man Lift, mod. Z34/22N, ser. no. 2515, 1,580 hrs., integrated charger [Loc. Mat. Hand.]

Nelson Bridge Crane, mod. , 5-ton cap., single-girder, 48 ft. span w/ underslung SpaceMaster SX wire-rope hoist, remote control (excluding runway ...

Anver Center-Load Vacuum Lifter, mod. 38000471-AT200M8-190-4/44, ser. no. SO190012998 (2019), 2,000 lbs. cap., 20 ft. max. length, 8 ft. max. widt...

Office furniture, 6 sectional Office cubical, 223 inch length x 8ft width x 29 inch height. Per cubical is 111.5 inch by length. C/W 3 door filing...

Samsung 85 inch Television, [Loc. Assembly Area]

Panasonic Inverter Microwave, model NN-SC678C, [Loc. Cafeteria Assembly Area]

(8) Sections of approx 5" x 120" x 32" Roller Conveyor [Loc. Assembly]

(2) Racks of Assorteed 4-Wheel Dollies [Loc. Assembly]

(2) Racks of Assorteed 4-Wheel Dollies [Loc. Assembly]

Super Vacu Vaccum Sealer (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple Loading: $100

Cup Filler for 4" Cups (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple Loading: $250

Alfa Laval Cheese Block Forming Tower (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple Loading: $3200

Damrow Cheese Table Tank for Feta with Strainer Conveyor (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple L...

18,000L Curd Tank (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple Loading: $2300

22,000L Curd Tank (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple Loading: $2300

Tank with Twin Screw Extruder for Mozza Line - Screws were recently electro-polished for easier cleaning. Extruder was used to feed the Form and C...

Repak Model RE15 Horizontal Vacuum Rollstock Packaging Machine (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for S...

CurtainRock 40 Insulation 3" x 24" x 48" approx. 480sq.ft [Loc. Assembly]

Alfa Laval Separator - SN 2893700 (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple Loading: $950

Qualtec HTST Pasteurization Skid, Capable of 18,000 L/Hr, Newer Controls, Balance Tank, Holding Tubes (Any Dimensions Provided are Approximate) | ...

Deville Model FS40V Cheese Shredder, S/N: 5010 (Any Dimensions Provided are Approximate) | Required Rigging and Loading Fee for Simple Loading: $2...

Triangle Model SB95C Vertical Form Fill and Seal Machine, S/N 120654, Photo Eye, Image SmartDate X 45 Date Coder, 6.75" Forming Tube (Any Dimensio...

Lot of Assorted Tremco Sealant Tape [Loc. Assembly]

Lot of Casters [Loc. Assembly]

(2) Crates of Assorted Parts Bins [Loc. Assembly]

Albion Air Powered multi component cartridge gun, mod. AT400 [Loc. Tool Crib]

(1) stack racks 44 inch width x 8 feet length. (3)Stack racks, 4 feet width x 4 feet length [Loc. Fabrication]

(5) Stack racks, 4 feet width x 4 feet length [Loc. Fabrication]

(3) Stack racks, 4 feet width x 4 feet length [Loc. Fabrication]

Waco Dominant 10 head high speed moulder, hydraulic power pack, control cabinet and spare parts blow pipe to be disconnected after spyder

1990 Waco Type BKE-Twin , 72" vertical twin shifting resaw system P/W twin 40 hp motors, (6) roll feed, single column, saw wheel diam 1250mm, saw ...

Yates American A20 6 head planer, top, bottom, side, side, top, bottom, side heads bottom 40 hp, top left top right 25 hp, other two 25 hp, 20 hp ...

Waycon servo driven overhead 4 saw P.E.T trim system consisting of 8 1/2 ft 5 strand transfer deck, 55" 5 strand transfer deck twin 18" servo posi...

Weinig Hydromat 23 9 head high speed moulder working width up to 230 mm, working height 160mm, 80m/min speed, jointed, top, side, side, side, side...

Stenner mod VHR48 vertical resaw, 48" 50 hp, power feed through roll, push button control, mechanical strain, S/N C10702

Baker 6 head resaw system with 12' X 30' through feed belt conveyor, (6) sets of feed through rolls (6) 30 hp 1765 rpm saws drives, 208-230/480, p...

Signode WHT80MP44 automatic strapping system, top & side squeeze M55 strapping head, auto dunnage, Signode dispensing stand, 10 hp power pack , 11...

1993 Omeco mod 8R 4.8, Veneer roll drying system 4.8 meter W, 8 section, 4 deck (rebuilt 2020) 8 strand 25' pre position transfer deck, twin grip ...

2023 Miura LX-300SG-16 high pressure boiler system 10' X 32' insulated skid mounted building, natural gas, max input 11,544,000 btu/hr, min input ...

2013 Ganesh VFM-6328B Express Vertical Machining Center, Mitsubishi M720 Control, 8,000 rpm 2-Stage ZF Gearbox, 24-Arm Type ATC, Cat 50, x62.99", ...

1999 Daewoo Diamond Series DMV-500 CNC Machining Center Mitsubishi 500 controls, X=40.2", Y=20.0", Z=20.2" Table 47.2" x 19.7", 25hp, 23 station t...