Featured lot
Romi M27 27" x 120" CNC Lathe, Fanuc 21i-TB CNC Control with Manual Option, 27" Swing Swing Over Bed, 16.93" Swing Over Cross Slide, 16" 3-Jaw Chu...
We found 29 featured lot(s)
Refine your search
Location
Primary Category
Category
Brand
- Fanuc (8)
- Mazak (5)
- Mazatrol (4)
- Modern (4)
- Clausing (3)
- Kitagawa (3)
- Milwaukee (3)
- Clausing Colchester (2)
- Colchester (2)
- Fagor (2)
- Romi (2)
- Bechler (1)
- Bridgeport (1)
- Flow (1)
- Heckert (1)
- Hwacheon (1)
- Hyundai (1)
- Kent (1)
- LNS (1)
- MORI (1)
- Matrix (1)
- Mayfran (1)
- Miyano (1)
- Monarch (1)
- Mori Seiki (1)
- Nakamura (1)
- Nakamura Tome (1)
- Newall (1)
- Sony (1)
- Startrite (1)
- TOS (1)
- Takamaz (1)
- Tornos (1)
- WMW (1)
- WMW Heckert (1)
- Wasino (1)
Item Type
Auction Type
Country
State/Province
Auctioneer
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Filtered by:
- Item Type
- List
- Grid
-
29 item(s)/page
Featured lot
2015 - Kent #RML-1440 VT Engine Lathe Capacity 14" Swing x 40" Centers, Cross Slide, Tail Stock, Tool Post, Hole Through Spindle 2"; Speeds 20-400...
Featured lot
Clausing Multiturn 6000XS CNC Lathe (2019). Brand: Clausing, Model: Multiturn 6000XS, Year: 2019, Swing Over Bed: 30", Swing Over Cross Slide: 22"...
Featured lot
Hyundai Wia L300A CNC Lathe w/ LNS 6.68 Super HydroBar Bar Feeder (2016). Brand: Hyundai Wia, Model: L300A, Serial #: G3154-0756, Year: 2016, Appr...
Featured lot
Lot 66
2014 MODERN TTB-300-1700 CNC LATHE, W/FANUC SERIES Oi-TD CONTROLS, 4 3/4 BORE 12 STATION TOOL HOLDER
2014 MODERN TTB-300-1700 CNC LATHE, W/FANUC SERIES Oi-TD CONTROLS, 4 3/4 BORE 12 STATION TOOL HOLDER, 15 IN. - 3 JAW CHUCK, 220 VOLT, 62 HP, KEY A...
Featured lot
Lot 87
2024 MODERN LATHE, MODEL C6246 X 1500, 208 V, 3 PH, 7.5 HP, GAP BED, SINO SDS2-3VA READ OUT, 3 AND 4
2024 MODERN LATHE, MODEL C6246 X 1500, 208 V, 3 PH, 7.5 HP, GAP BED, SINO SDS2-3VA READ OUT, 3 AND 4 JAW CHUCK, TOOL POST AND HOLDERS, 20 IN. SWIN...
Featured lot
Lot 93
TOS TRENCIN LATHE, MODEL SN71C, 220 V, 3 PH., 3 JAW CHUCK, TOOL POST, 31 IN. SWING X 120 IN. CENTERS
TOS TRENCIN LATHE, MODEL SN71C, 220 V, 3 PH., 3 JAW CHUCK, TOOL POST, 31 IN. SWING X 120 IN. CENTERS
Featured lot
Lot 219
Tornos Bechler 10-Axis Deco 2000/13 Swiss-Type CNC Lathe, S/N: 2637 (2001); 13-mm, with Tornos-
Tornos Bechler 10-Axis Deco 2000/13 Swiss-Type CNC Lathe, S/N: 2637 (2001); 13-mm, with Tornos-Bechler Fanuc PNC Deco Digital CNC Controls, Roboba...
Featured lot
Lot 224
Miyano Ocean GN-3200 2-Axis Single Spindle CNC Lathe, S/N: 08SDS0021U (2008); with Gantry Loader,
224Miyano Ocean GN-3200 2-Axis Single Spindle CNC Lathe, S/N: 08SDS0021U (2008); with Gantry Loader,
Miyano Ocean GN-3200 2-Axis Single Spindle CNC Lathe, S/N: 08SDS0021U (2008); with Gantry Loader, Fanuc Series Oi-TC Controls (Asset #: 258)
Featured lot
Lot 236
Tecno Wasino Model G07-F CNC 2-Axis CNC Gang-Type Production Lathe, S/N: 3163 (2004); with Gantry
236Tecno Wasino Model G07-F CNC 2-Axis CNC Gang-Type Production Lathe, S/N: 3163 (2004); with Gantry
Tecno Wasino Model G07-F CNC 2-Axis CNC Gang-Type Production Lathe, S/N: 3163 (2004); with Gantry Loader, Stainless Automation Stocker Table (Asse...
Featured lot
Lot 243
Kummer Model K65 Double-Spindle High-Precision CNC Chucker, S/N: R3042 (2002); with Siemens Model
243Kummer Model K65 Double-Spindle High-Precision CNC Chucker, S/N: R3042 (2002); with Siemens Model
Kummer Model K65 Double-Spindle High-Precision CNC Chucker, S/N: R3042 (2002); with Siemens Model 840D CNC Controls, Automatic Loading System, 15-...
Featured lot
Lot 245
Takamaz Model XL-100 CNC Chucker, S/N: 1310266 (2012); with 6 in. Chuck, 8-Position Turret, 12-
Takamaz Model XL-100 CNC Chucker, S/N: 1310266 (2012); with 6 in. Chuck, 8-Position Turret, 12-Position Turret, ?75-mm Spindle Bearing I.D., Spind...
Featured lot
Lot 249
Nakamura-Tome 5-Axis Model SC-150 CNC Chucker, S/N: S-151108 (2005); with Fanuc Series 18i-T CNC
Nakamura-Tome 5-Axis Model SC-150 CNC Chucker, S/N: S-151108 (2005); with Fanuc Series 18i-T CNC Controls, Gantry Loader, Stocker Table, Hi-Press...
Featured lot
WMW HECKERT MODEL ZFWVG 250x3150/2 ENGINE LATHE, INPUT POWER: 110V/460V, 60 Hz, 12kW, 21 A, S/N 2644 27/45 [Located at Falk Gear: 3001 W Canal St...
Featured lot
MAZAK QUICK TURN 250HP-UNIVERSAL CNC LATHE,MAX SWING DIAMETER: 22”, MAX. TURNING DIAMETER: 18”, MAX. TURNING LENGTH: 40”, SPINDLE BORE: 3.5”, BAR ...
Featured lot
HWACHEON HI-TECH 200AT CNC LATHE, FANUC SERIES 0i-T CNC CONTROL, MAX SWING: 20”, MAX. TURNING DIAMETER: 14”, SPINDLE BORE: 2.56”, BAR CAPACITY: 2”...
Featured lot
Lot 90
2024 MODERN MANUAL LATHE, MODERN 760 X 3000, 208V, 3PH, 20 IN. - 3 JAW CHUCK AND 4 JAW, FAGOR READOU
2024 MODERN MANUAL LATHE, MODERN 760 X 3000, 208V, 3PH, 20 IN. - 3 JAW CHUCK AND 4 JAW, FAGOR READOUT, TOOL POST, 2 STEADY RESTS GAP BED, 30 IN. S...
Featured lot
Lot 23A
CYCLEMATIC CTS-27 HIGH ACCURACY TOOLROOM LATHE, COLLET CHUCK, S/N 8702132 W/ CABINET OF TOOLING (
23ACYCLEMATIC CTS-27 HIGH ACCURACY TOOLROOM LATHE, COLLET CHUCK, S/N 8702132 W/ CABINET OF TOOLING (
CYCLEMATIC CTS-27 HIGH ACCURACY TOOLROOM LATHE, COLLET CHUCK, S/N 8702132 W/ CABINET OF TOOLING (RIGGING FEE $450)
Featured lot
Lot 109
15" X 50" CLAUSING COLCHESTER TOOLROOM ENGINE LATHE; S/N GG0587, 7" COLLET CHUCK, NEWALL C-80 DRO,
15" X 50" CLAUSING COLCHESTER TOOLROOM ENGINE LATHE; S/N GG0587, 7" COLLET CHUCK, NEWALL C-80 DRO, 2" SPINDLE HOLE, SPINDLE SPEED 25-2,000 RPM
Featured lot
Lot 1135
MODERN MANUAL LATHE, 430 X 1100, STEADY REST, FAGOR READOUT, QUICK CHANGE TOOL POST, 3 JAW - 10 IN.
MODERN MANUAL LATHE, 430 X 1100, STEADY REST, FAGOR READOUT, QUICK CHANGE TOOL POST, 3 JAW - 10 IN. CHUCK, TAPER ATTACHMENT, 18 IN SWING
Featured lot
Romi-Bridgeport Tormax 13.5 13" x 40" Geared Head Engine Lathe, with Ditron D60-2v DRO
Featured lot
Lot 14
48” WEBSTER BENNENT VERTICAL TURRET LATHE CONVERTED TO GRINDER; 60” MAX SWING, SEAMATIC / GCH
48” WEBSTER BENNENT VERTICAL TURRET LATHE CONVERTED TO GRINDER; 60” MAX SWING, SEAMATIC / GCH REBUILT GRINDING SPINDLE
Featured lot
Lot 129
Monarch 20" x 78" Toolroom Lathe, Model 612, S/N 451124, 12" 3 & 4-Jaw Chucks, Taper Attachment, SS
Monarch 20" x 78" Toolroom Lathe, Model 612, S/N 451124, 12" 3 & 4-Jaw Chucks, Taper Attachment, SS to 1500 RPM, Inch/Metric Threading, Steady Res...
Featured lot
Lot 132
Clausing Colchester 17" x 50" Toolroom Lathe, S/N 6/0055/31068, 10" 6 & 3-Jaw Chuck, SS to 2000 RPM,
Clausing Colchester 17" x 50" Toolroom Lathe, S/N 6/0055/31068, 10" 6 & 3-Jaw Chuck, SS to 2000 RPM, Inch/Metric Threading
Featured lot
MAZAK SUPER QUICK TURN 250M CNC TURNING CENTER, 10" HYDRAULIC CHUCK, 12 POSITION LIVE TOOL TURRET, FUSION 640 CONTROL, TAILSTOCK, TOOL PRESETTER, ...
Featured lot
MORI SEIKI SL-403BMC/800 CNC LATHE TURNING CENTER WITH LIVE TOOLS, Year Manufactured : 2007, 15" Kitagawa Hydraulic Chuck, 12 Position, Live Tool ...
Featured lot
MAZAK QTN-350-II CNC TURNING CENTER CNC LATHE, 12" KITAGAWA HYDRAULIC CHUCK, MAZATROL MATRIX CONTROL, 12 POSITION TURRET, MIST COLLECTOR, CHIP, CO...
Featured lot
MAZAK Quickturn Nexus 250M CNC TURNING CENTER CNC LATHE, 10" Kitagawa Chuck, 12 Position Live Tool Turret, Mazatrol 640T Nexus CNC Control, Chip C...
Featured lot
MAZAK SQT 250M CNC TURNING CENTER CNC LATHE, 10" Hydraulic Chuck, Mazatrol Fusion 640 Control, 12 Position Live Tool Turret, Tailstock, Mist Colle...
Loading...-
29 item(s)/page