2015 Haas TM-1P, Serial Number: 1122617, Travels: 30" x 12" x 16”, 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
2015 Haas TM-1P, Serial Number: 1122617, Travels: 30" x 12" x 16”, 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
2015 Haas TM-1P, Serial Number: 1122580, Travels: 30" x 12" x 16”, 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
2015 Haas TM-1P, Serial Number: 1122657, Travels: 30" x 12" x 16", 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
2015 Haas TM-1P, Serial Number: 1122618, Travels: 30" x 12" x 16", 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
2014 DOOSAN NHP 5500 HORIZONTAL MACHINING CENTER, CNC HMC S/N MH0020-000074 SPECIFICATIONS 20 X 20 PALLETS X AXIS TRAVEL: 31.500 INCH Y AXIS TRA...
2011 DOOSAN PUMA MX3100S CNC LATHE S/N MM0020 000018 SPECIFICATIONS CONTROL: FANUC 31I-A (4+1) SWING OVER BED: 39.37 INCH SWING OVER CARRIAGE: 27...
2021 ENSHU GE480H 500MM CNC HORIZONTAL MACHINING CENTER, HMC SN: 412 X AXIS TRAVEL: 31.5 IN Y AXIS TRAVEL: 31.5 IN Z AXIS TRAVEL: 31.5 IN SPINDLE...
2013 DOOSAN HP 5100 II 500MM CNC HORIZONTAL MACHINING CENTER, HMC SN: MH 0005-000455 SPECIFICATIONS: CONTROL TYPE FANUC 31I-MB # AXIS 4 PALLET LE...
Okuma V100R CNC Vertical Turret Lathe, S/N 10067, 2007, with 39" 3-Jaw Chuck, 1,250-RPM, 49" Swing, 39" Max. Diameter, 35" Max. Length, 22" X-Axis...
Hwacheon VT-550R CNC Vertical Turret Lathe, S/N M086355L5GF, 2007, with 24" 3-Jaw Chuck, 1,500-RPM, 32" Swing, 29" Swing over Saddle, 25.6" Max. D...
Haas EC-500 CNC Horizontal Machining Center, S/N 2054596, 2015, with (2) 20" x 20" Pallets, 32" X-Axis Travel, 25" Y-Axis Travel, 28" Z-Axis Trave...
Haas EC-1600YZT CNC Horizontal Machining Center, S/N 2053376, 2011, with 64" x 32" Table & Integrated 30" Full 4th Rotary Table, 6,000-RPM, CT 50,...
DMC DT40i CNC Tapping Center, S/N T40I0044, 2013, with 27.5" x 16" Table, 10,000-RPM, BT 30, 600 mm X-Axis Travel, 400 mm Y-Axis Travel, 350 mm Z-...
OKK VM7-III CNC Vertical Machining Center, S/N 410, 2003, 61" x 29" Table, CT 50, 60" X-Axis Travel, 29" Y-Axis Travel, 26" Z-Axis Travel, 30-Posi...
2017 Okuma Multus B550 5-Axis CNC Turning Center, Capacity: Swing Over Saddle 32.68", Distance Between Centers 100.16", Max Machining Diameter 32....
2014 Giddings & Lewis HMC 1600 Horizontal CNC Machining Center, X: 106.3", Y: 70.9", Z: 80.7", 62 hp, 10,000 RPM, 60 ATC, Cat 50 Taper, 4 Axis. Eq...
2015 Giddings & Lewis VTC 1000FX Vertical CNC Boring Mill, Table diameter 39", maximum swing 47.2", X-axis travel 33", Z-axis travel 29.5". Equipp...
2008 Giddings & Lewis RT 1250 CNC Boring Mill, Equipped with Fanuc 310i CNC, 60 hp, 4000 RPM, 60-position tool changer, contouring rotary table. 5...
2014 Doosan DBC-130-II CNC Horizontal Table-Type Boring Mill. Featuring a 5.1" spindle, 118.1" X-axis travel, 78.7" Y-axis travel, 60 hp, and 2500...
Wickman Bennett 2500 HD-2R Revelation Vertical CNC, 18 position tool changer, 70" dia. Chuck, GE Fanuc Series 18i-TB controls, chip conveyor, S/N ...
Haas CNC Vertical Machining Center Model VF-3B, S/N 32685 (2003), 48"x 18" T-Slotted Table, 40 Taper Spindle, Haas VOP-D, 20 HP 2-Speed Gear Drive...
Haas CNC Vertical Machining Center Model VF-0, S/N 22384 (2000), 26" x 14" T-Slotted Table, 40 Taper Spindle, 20 HP Vector Dual Drive, 20 Automati...