2015 Makino A40 Horizontal Machining Center Makino Pro 5 CNC Control; Max Spindle Speeds 12,000; Twin Pallets 15.7" x 15.7" Travels: X - 22", Y - ...
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
2015 Makino A40 Horizontal Machining Center Makino Pro 5 CNC Control; Max Spindle Speeds 12,000; Twin Pallets 15.7" x 15.7" Travels: X - 22", Y - ...
(19) Assorted CAT 40 Taper Tool Holders
2015 Haas TM-1P, Serial Number: 1122617, Travels: 30" x 12" x 16”, 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
2015 Haas TM-1P, Serial Number: 1122580, Travels: 30" x 12" x 16”, 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
2015 Haas TM-1P, Serial Number: 1122657, Travels: 30" x 12" x 16", 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
2015 Haas TM-1P, Serial Number: 1122618, Travels: 30" x 12" x 16", 10 ATC (automatic tool changer), 40 Taper, 6,000 RPM Spindle, Rigid Tapping, Qu...
Leblond Regal 26'' x 240'' Engine Lathe with 15'' 3& 4-Jaw Chuck 2'' Bore, IMS Tool Post, Spindle Speeds to 1080 RPM, Inch Threading, 2 Steady Res...
Doosan MYNX 9500 CNC Vertical Machining Center with 98.4'' x 37.4'' Table, Fanuc iSeries Controls, Renishaw RMP 60 Tool Probe, 40 ATC, 50 Taper Bi...
Mori Seiki Dura Vertical 5100 4-Axis CNC Vertical Machining Center with 53.1'' x 23.6'' Table, Tool Probe, 30 ATC, 40 Taper Spindle Speeds to 12,0...
Trak DPMSX2P CNC Vertical Bed Mill (SHOP-2) S/N: 134DK280 Year: 2013 General Specifications: Table size: 49" x 9" T-slots: 3 (0.63" x 2.5") Max. ...
Mori Seiki NT4300 DCG CNC Lathe (SHOP) Model: NT4300/1000SZ S/N: NT430FK0030 Year: 2007 Includes: MSX-711 CNC Control Main spindle with 12" chuck...
2014 DOOSAN NHP 5500 HORIZONTAL MACHINING CENTER, CNC HMC S/N MH0020-000074 SPECIFICATIONS 20 X 20 PALLETS X AXIS TRAVEL: 31.500 INCH Y AXIS TRA...
2011 DOOSAN PUMA MX3100S CNC LATHE S/N MM0020 000018 SPECIFICATIONS CONTROL: FANUC 31I-A (4+1) SWING OVER BED: 39.37 INCH SWING OVER CARRIAGE: 27...
AWEA (2010) LP4025 CNC 4-AXIS BRIDGE TYPE VERTICAL MACHINING CENTER WITH FANUC SERIES 18I-MB CNC CONTROL, 94.50"X 158.25" T-SLOT TABLE, TRAVELS; X...
AWEA (2015) SP-3016 CNC BRIDGE TYPE VERTICAL MACHINING CENTER WITH FANUC SERIES 31I MODEL B CNC CONTROL, 59"X 128" T-SLOT TABLE, TRAVELS; X- 82.67...
AWEA (2012) SP-2016 CNC BRIDGE TYPE VERTICAL MACHINING CENTER WITH FANUC SERIES 0I-MD CNC CONTROL, 59"X 91" T-SLOT TABLE, TRAVELS; X- 82.67", Y- 6...
AWEA (2013) BM-1600 CNC VERTICAL MACHINING CENTER WITH MITSUBISHI M70 CNC CONTROL, 31.5"X 67" T-SLOT TABLE, TRAVELS; X- 62.99", Y- 31.49", Z- 31.4...
AWEA (2015) AF-1000 CNC VERTICAL MACHINING CENTER WITH MITSUBISHI M70 CNC CONTROL, 21.75"X 47.25" T-SLOT TABLE, TRAVELS; X- 40.15", Y- 21.65", Z- ...
AWEA (2014) AF-1000 CNC VERTICAL MACHINING CENTER WITH MITSUBISHI M70 CNC CONTROL, 21.75"X 47.25" T-SLOT TABLE, TRAVELS; X- 40.15", Y- 21.65", Z- ...
2014 Okuma Millac 761 VII Machining Center, 2014. 60.63" X, 29.92" Y, 25.98" Z travel, 35 hp, 6,000 RPM, 36 ATC, Cat 50 taper, 28.35" x 70.87" tab...
2014 Giddings & Lewis HMC 1600 Horizontal CNC Machining Center, X: 106.3", Y: 70.9", Z: 80.7", 62 hp, 10,000 RPM, 60 ATC, Cat 50 Taper, 4 Axis. Eq...
2012 SNK Nissin BP130-3.0 Horizontal Boring Mill, featuring a 5.1" spindle; Movement: X-Axis Travel (Table Back and Fourth) 118.11", Y-Axis Travel...
2007 Mazak VTC-250/50D Vertical Machining Center, Fixed Table and Traveling Column, with 69.3" X, 25" Y, 25.9" Z Travel, 30 hp, 6,000 RPM, CAT 50 ...
Okuma LC40 Horizontal CNC Lathe, 12 position tool holder, X and Z axis, X-6.10", Z-21.65", swing 23.62", turning dia. 21.65", turning length 19.69...
Haas CNC Vertical Machining Center Model VF-3B, S/N 32685 (2003), 48"x 18" T-Slotted Table, 40 Taper Spindle, Haas VOP-D, 20 HP 2-Speed Gear Drive...
Haas CNC Vertical Machining Center Model VF-0, S/N 22384 (2000), 26" x 14" T-Slotted Table, 40 Taper Spindle, 20 HP Vector Dual Drive, 20 Automati...