Hardinge Approximate 11" x 18" Super Precision Toolroom Lathe, Model HLV-H. With Acu-Rite III digita
Hardinge Approximate 11" x 18" Super Precision Toolroom Lathe, Model HLV-H. With Acu-Rite III digital readout & misc. tooling.
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Hardinge Approximate 11" x 18" Super Precision Toolroom Lathe, Model HLV-H. With Acu-Rite III digital readout & misc. tooling.
AFM TUG 40 GAP BED ENGINE LATHE WITH 19" SWING OVER BED, 60" BETWEEN CENTERS, SPEEDS UP TO 1600RPM, 10" 3 JAW CHUCK, 2" SPINDLE BORE, COOLANT, S/N...
OKUMA LB-15 CNC LATHE WITH OKUMA CNC CONTROL, 15.75" SWING OVER BED, 9.84" MAX. TURNING DIA., 9.06" MAX. TURNING LENGTH, 2.2" SPINDLE BORE, SPEEDS...
OKUMA LB-15 CNC LATHE WITH OKUMA CNC CONTROL, 15.75" SWING OVER BED, 9.84" MAX. TURNING DIA., 9.06" MAX. TURNING LENGTH, 2.2" SPINDLE BORE, SPEEDS...
Monarch Lathe w/ Dumore Post Grinder, S/N- MB10225, 180"x48"x40"
Summit Engine Lathe, 120" Bed, 20" Turning Radius, (2) Steady Rests & Tool Holder, 220/440-Volt, 4.18" Hole Through Spindle, Standard & Metric Thr...
Fortune Victor Model S20120 Toolroom Lathe, s/n 714156, 20" X 120" Cap, Inch/Metric, 16" 4 Jaw Chuck, 3-Jaw Chuck, 4-Way Toolpost, Trav-A-Dial, (2...
SWI Trak Model 1840SX CNC Lathe, s/n 074C016033, 2-Axis, with Prototrak SLX CNC Control, 18" X 40" Capacity, 10" 3-Jaw Chuck
64" Bullard Cutmaster Vertical Turret Lathe Boring Mill, 64" Table with 4 boring mill jaws, 72" max swing with side head below table, 54" under cr...
Olympia V 60 CNC Vertical Lathe, S/N OE 2001-398, 66" built in 4 jaw chuck, 72" max turning dia., 84" max turning height, 80 HP main spindle drive...
Toshiba TUE-15 CNC Vertical Lathe, 59" chuck, 70" max. turning dia., 59" max turning height, 35" ram travel, max 300 rpm, 60 HP main spindle, 12 p...
New Century CNC Vertical Lathe, , 120" chuck, 126" max. turning dia., 120" max turning height, 0-140 RPM, Heavy Duty Octagonal Ram, 90" X travel, ...
Tarnow Mdl. TUJ-50M/120 Gap Bed Lathe, 22" Swing, 120" Between Centers, 31-1/2" Swing over Gap, 14-1/2" Swing over Carriage, 3-1/2" Spindle Bore, ...
2008 - Clausing Mdl. CKE6156Z/1500 CNC Lathe, 22" Swing, 60" Between Centers, 13" Swing over Carriage, Spindle Speeds 7 to 2200 RPM, 12" Diameter ...
SUMMIT 52-6X160B GAP BED ENGINE LATHE WITH NEWALL C80 2 AXIS DRO, 52" SWING OVER BED, 236" BETWEEN CENTERS, 36" 4-JAW CHUCK, 6" BORE, SPEEDS UP TO...
TOS SU125 ENGINE LATHE WITH 54" SWING OVER BED, 330" DISTANCE BETWEEN CENTERS, 4" SPINDLE BORE, 25" 3- JAW CHUCK, SPEEDS TO 450RPM, INCH/MM THREAD...
STANKO 1M63B LATHE WITH NEWALL DP7 2 AXIS DRO, 31" SWING OVER BED, 120" BETWEEN CENTERS, 19.5" 4 JAW CHUCK, 2.75" BORE, SPEEDS UP TO 1250 RPM, S/N...
2016 Nomura NN-20UB8 CNC Swiss Lathe (SN: 200091401); 0.79" Machining Diameter; 0.79" Machining Length; Max Part Unload Length: 4.13"; 0.79" Bore...
Maintenance & Metalworking Equipment - Lathes, Welders, Mills & Misc Support | Lots 5001 - 5325 (Informational Only)
Haas CNC Lathe Model SL-30T, S/N 66165 (2003), 15" Max Turning Diameter, 30" Max Turning Length, 3400 Max RPM Spindle Speed, 30 HP Spindle Drive, ...
Haas CNC Lathe Model SL-30T, S/N 65198 (2002), 15" Max Turning Diameter, 30" Max Turning Length, 3400 Max RPM Spindle Speed, 30 HP Spindle Drive, ...
Haas CNC Lathe Model SL-20T, S/N 63936 (2001), 10.3" Max Turning Diameter, 20" Max Turning Length, 4,000 Max RPM Spindle Speeds, 20 HP Spindle Dri...
Hercules Ajax Mazak 18 18" x 60" Engine Lathe, S/N 10682, 18" Swing Over Bed, 60" Between Centers, 10 1/8" Swing Over Cross Slide, 25 1/8" Swing O...