Featured lot
2007 Johnford Model DMC3100SH Super Vertical, CNC Gantry Machining Center, S/N VGC 7025, w/ Fanuc 18i-MB Control, CAT50 Taper, 122" X-Axis and 70"...
We found 32 featured lot(s)
Refine your search
Lots with images only
Remove filter
Location
Primary Category
Category
Brand
- Fanuc (9)
- Mazak (4)
- Mazatrol (4)
- SMW (4)
- MORI (3)
- Matsuura (3)
- Mayfran (3)
- Chevalier (2)
- Hurco (2)
- Index (2)
- LNS (2)
- Mori Seiki (2)
- Nakamura (2)
- Nakamura Tome (2)
- AXA (1)
- BT (1)
- Bridgeport (1)
- Citizen (1)
- DMC (1)
- DMG (1)
- DMG Mori (1)
- Doosan (1)
- Federal (1)
- Gardner (1)
- General (1)
- Haas (1)
- Hardinge (1)
- Johnford (1)
- Keller (1)
- Leadwell (1)
- Matrix (1)
- Newall (1)
- Okuma (1)
- Pacific (1)
- SouthWestern (1)
- Takumi (1)
- Trak (1)
- Union (1)
Item Type
Auction Type
Country
State/Province
Auctioneer
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Filtered by:
- Lots with images only,
- Item Type
- List
- Grid
-
32 item(s)/page
Featured lot
2007 MAZAK QTN-100 II MY CNC TURNING CENTER, LIVE TOOLING, Y AXIS, LOW HOURS, CNC LATHE, LIVE TOOL LATHE, TOOLBOX, CHUCK, COLLETS, MANUALS, & TOO...
Featured lot
Lot 357
Hardinge Super Precision Model TFB-H, 11" x 18" Dovetail Bed Toolroom Lathe, S/n 6811-P, Cabinet
Hardinge Super Precision Model TFB-H, 11" x 18" Dovetail Bed Toolroom Lathe, S/n 6811-P, Cabinet Base, 5C Collet Chuck, Aloris AXA Quick Change To...
Featured lot
Lot 363
Okuma Model LT10-MY CNC Turning Center, s/n 1303-U436, New 2000, OSP-U100L CNC Control, Sub Spindle,
Okuma Model LT10-MY CNC Turning Center, s/n 1303-U436, New 2000, OSP-U100L CNC Control, Sub Spindle, Milling, C-Axis on Main and Sub Spindle, Y-Ax...
Featured lot
Lot 373
Mazak Model Multiplex 6100Y Multi-Axis Dual Spindle CNC Lathe, s/n 159738, New 2002, Mazatrol 640T
Mazak Model Multiplex 6100Y Multi-Axis Dual Spindle CNC Lathe, s/n 159738, New 2002, Mazatrol 640T CNC Control, Milling, Sub-Spindle, C-Axis on Bo...
Featured lot
Mazak Model SQT-10M CNC Turning Center, s/n 117287, New 1995, Mazatrol T Plus CNC Control, Milling, C-Axis on Spindle, 1.625" Capacity, 17.13" Swi...
Featured lot
Lot 385
Mazak Model SQT-10MS CNC Turning Center, s/n 117292, New 1995, Mazatrol T Plus CNC Control, Milling,
Mazak Model SQT-10MS CNC Turning Center, s/n 117292, New 1995, Mazatrol T Plus CNC Control, Milling, Sub-Spindle, C-Axis on Both Spindles, 1.652" ...
Featured lot
Takisawa Model TS-4000YS (TS1), CNC Twin Spindle Slant Bed Turning Center w/ Dual Opposed Chucks, 4200-RPM, 30/20-HP Main Spindle w/ C-Axis, A2-8 ...
Featured lot
Matsuura Model H.Plus-504 (PC6), 6-Pallet CNC 4-Axis Horizontal Machining Center, w/ Fanuc G-Tech 31I Digital Controls, PC2 Pallet Changer, MIMS (...
Featured lot
Hurco Model VM30i, CNC Vertical Machining Center, w/ 52" x 20" T-Slot Table, X-Axis 50" Travel, Y-Axis 20" Travel, Z-Axis 20" Travel, 12,000-RPM M...
Featured lot
Hurco Model VM10i, CNC Vertical Machining Center, 12,000-RPM Max Spindle Speed, w/ Hurco Max 5 Dual Display Digital Controls, Winmax Classic Graph...
Featured lot
Matsuura Model Maxia MX-330, 5-Axis CNC Vertical Machining Center, w/ Trunnion Rotary Table Raptor RWP-222, Renishaw OPM Toolsetting Probe 60-CAT ...
Featured lot
Brand: Southwestern Industries, model: Trak DPMSX2P, serial #: 182DK401, approx. shipping weight: 4000 lbs, approx. shipping dimensions: 6' L x 6'...
Featured lot
Location: Lagrange, KY, 40021 Brand: Poreba, Model: TRP 93/2M, Year: 2000 Machine Specifications: swing: 36.557", centers: 78.616", spindle bore: ...
Featured lot
Brand: DMG Mori. Model: DMC 650 V. Year: 2017. Approx. Shipping Dimensions: 129.92" x 90.55" x 106.3". Table Size: 37.8" x 22.44". Max Table Load:...
Featured lot
Brand: Haas Model: VF9/50 Year: 2006 Table Size: 84" x 36" X-Axis Travel: 84" Y-Axis Travel: 40" Z-Axis Travel: 30" Spindle Speed: 7500 Spindle Ta...
Featured lot
Lot 63
2007 MORI SEIKI NT4200/1000S CNC MULTI AXIS CNC MACHINING CENTER, MORI SEIKI MSX-711III FANUC CNC
2007 MORI SEIKI NT4200/1000S CNC MULTI AXIS CNC MACHINING CENTER, MORI SEIKI MSX-711III FANUC CNC CONTROL, 9 AXIS, DUAL SPINDLE, SWING 28.7 IN., T...
Featured lot
Lot 64
2007 MORI SEIKI NT4200/1000 SZ CNC MULTI AXIS CNC MACHINING CENTER, MORI SEIKI MSX-711III FANUC
2007 MORI SEIKI NT4200/1000 SZ CNC MULTI AXIS CNC MACHINING CENTER, MORI SEIKI MSX-711III FANUC CNC CONTROL, 9 AXIS, DUAL SPINDLE, SWING 28.7 IN.,...
Featured lot
Brand: Leadwell, Model: T-7SMY, Serial #: L2TAF0036, Year: 2018, Approx. Shipping Weight: 15,000 lbs., Approx. Shipping Dimensions: 21' L x 8' W x...
Featured lot
Lot 65
2010 MATSUURA V PLUS-1000 CNC VERTICAL MACHINING CENTER, MATSUURA G-TECH 30i CNC CONTROL, TABLE SIZE
2010 MATSUURA V PLUS-1000 CNC VERTICAL MACHINING CENTER, MATSUURA G-TECH 30i CNC CONTROL, TABLE SIZE 45.25 X 21.50, X AXIS 40.15, Y AXIS 21.65, Z ...
Featured lot
Lot 67
2010 NAKAMURA-TOME SC-200 L MYS. CNC TURNING CENTER, FANUC SERIES 18i - TB CNC CONTROL, 12/24-
2010 NAKAMURA-TOME SC-200 L MYS. CNC TURNING CENTER, FANUC SERIES 18i - TB CNC CONTROL, 12/24-STATION TURRET, LIVE TOOLING, C-AXIS, Y AXIS, PROGRA...
Featured lot
Brand: Citizen, Model: A32 VIICL, Serial #: A32/0078, Year: 2012, Approx. Shipping Weight: 9,000 lbs., Approx. Shipping Dimensions: 26' L x 8' W x...
Featured lot
2007 NAKAMURA-TOME SC-200L MYS CNC TURNING CENTER, FANUC SERIES 18i - TB CNC CONTROL, 12/24 STATION TURRET, LIVE TOOLING, C-AXIS, Y-AXIS, PROGRAMA...
Featured lot
Location: LaGrange, KY, 40021 Brand: Doosan, Model: Puma 700L II, Year: 2020, SPECS: swing: 40.55", machining length: 126", # axis: 2, chuck size:...
Featured lot
Lot 72
2000 CHEVALIER CYLINDRICAL GRINDER, 12 IN. X 24 IN. CAPACITY, 90 DEGREE SWIVEL HEAD, 350 RPM,
2000 CHEVALIER CYLINDRICAL GRINDER, 12 IN. X 24 IN. CAPACITY, 90 DEGREE SWIVEL HEAD, 350 RPM, SPINDLE, 5 HP, S/N GF39908
Featured lot
Brand: Multicam, Model: 3000 Series 3-103-R, Serial #: PF05580, Year: 2007, Approx. Shipping Weight: 4,000 Lbs., Approx. Shipping Dimensions: 12' ...
Featured lot
2006 Takumi V22 Vertical CNC Machining Center, 4th Axis Rotary Table, TSC, 6000 RPM Gear-Type Spindle, BT-50, Mist Collector, Chip Conveyor
Featured lot
Lot 1013
HANCHETT SK-24 CIRCULAR SLITTER KNIFE GRINDER WITH 6"-24" DIAMETER SLITTER KNIFE CAPACITY, 6"X0.5"
HANCHETT SK-24 CIRCULAR SLITTER KNIFE GRINDER WITH 6"-24" DIAMETER SLITTER KNIFE CAPACITY, 6"X0.5"X1.25" WHEEL, SPEEDS TO 3,600 RPM, 0-90 DEGREE G...
Featured lot
Lot 1028
POREBA TR-135B1/10M GAP BED ENGINE LATHE WITH 53" SWING OVER BED, 68" SWING IN THE GAP, 393" BETWEEN
POREBA TR-135B1/10M GAP BED ENGINE LATHE WITH 53" SWING OVER BED, 68" SWING IN THE GAP, 393" BETWEEN CENTERS, 4.75" SPINDLE BORE, SPEEDS TO 500 RP...
Featured lot
Lot 1033
CM TORTONA FERRO 20 GAP BED ENGINE LATHE WITH 21" SWING OVER BED, 28" SWING IN THE GAP, 157" BETWEEN
CM TORTONA FERRO 20 GAP BED ENGINE LATHE WITH 21" SWING OVER BED, 28" SWING IN THE GAP, 157" BETWEEN CENTERS, 4.25" SPINDLE BORE, SPEEDS TO 1500 R...
Featured lot
Lot 1037
KHM TLS GAP BED ENGINE LATHE WITH 16" SWING OVER BED, 21" SWING IN THE GAP, 44" BETWEEN CENTERS, 1.
KHM TLS GAP BED ENGINE LATHE WITH 16" SWING OVER BED, 21" SWING IN THE GAP, 44" BETWEEN CENTERS, 1.5" SPINDLE BORE, SPEEDS TO 2000 RPM, 8" 3-JAW C...
Featured lot
FALCON CHEVALIER FSG -- 3A1224 AUTOMATIC SURFACE GRINDER 230V, 60Hz, 3 PHASE, WEIGHT: 4,630LB, DIMENSIONS: 78" x 72" x 80", TABLE SURFACE: 12" x 2...
Loading...-
32 item(s)/page