Featured lot
CINCINNATI SHEAR 6208, 8'L X 3/4" CAP., S/N 10978
We found 20 featured lot(s)
Refine your search
Location
Primary Category
Category
Brand
Item Type
- Spindle (5)
- CNC Machining Center (4)
- 4th Axis (3)
- Chip Conveyor (3)
- 3 Axis (2)
- Cutting Machine (2)
- Engraver (2)
- Horizontal Machining Centre (2)
- Laser Engraver (2)
- Machining Center (2)
- Milling Machine (2)
- Tank Turning Roll (2)
- Vertical Machining Center (2)
- Vertical Milling Machine (2)
- CNC Machine (1)
- CO2 Laser (1)
- Chip Auger (1)
- Feed (1)
- Laser Cutting Machine (1)
- Plate Shear (1)
- Shear (1)
- Spotting Press (1)
- Tool Changer (1)
- Water Jet (1)
Auction Type
Country
State/Province
Auctioneer
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Filtered by:
- Category,
- Country,
- Auctioneer
- List
- Grid
-
20 item(s)/page
Featured lot
FIELDING & PLATT HYDRAULIC SPOTTING PRESS
Featured lot
Lot 66
JOE FULLER JFR1-90 270,000LB CAP. TANK TURNING ROLLS W/ JFRD-90 POWERED ROLLS AND (2) SETS OF
JOE FULLER JFR1-90 270,000LB CAP. TANK TURNING ROLLS W/ JFRD-90 POWERED ROLLS AND (2) SETS OF IDLERS, 12” – 21’ DIAMETER RANGE
Featured lot
Lot 67
JOE FULLER JFR1-90 270,000LB CAP. TANK TURNING ROLLS W/ JFRD-90 POWERED ROLLS AND (2) SETS OF
JOE FULLER JFR1-90 270,000LB CAP. TANK TURNING ROLLS W/ JFRD-90 POWERED ROLLS AND (2) SETS OF IDLERS, 12” – 21’ DIAMETER RANGE
Featured lot
Lot 72
2008 OMAX 55100 CNC WATERJET, S/N B511894, EBBCO FILTRATION UNITS, ABRASIVE TANK, ETC. W/ SPARE
2008 OMAX 55100 CNC WATERJET, S/N B511894, EBBCO FILTRATION UNITS, ABRASIVE TANK, ETC. W/ SPARE PARTS (LOCATED IN GEORGETOWN, ONTARIO)
Featured lot
Lot 1
2014 HAAS VF-2 CNC VERTICAL MACHINING CENTER, CNC CONTROL, BRUSHLESS 4TH AXIS OPTION, CT OPTION,
2014 HAAS VF-2 CNC VERTICAL MACHINING CENTER, CNC CONTROL, BRUSHLESS 4TH AXIS OPTION, CT OPTION, RIGID TAPPING, (24) STATION SIDEMOUNT TOOL CHANGE...
Featured lot
Lot 5
FADAL 906-1 VMC 4020HT CNC VERTICAL MACHINING CENTER, FADAL CNC 88HS CONTROL, 10,000 RPM SPINDLE,
FADAL 906-1 VMC 4020HT CNC VERTICAL MACHINING CENTER, FADAL CNC 88HS CONTROL, 10,000 RPM SPINDLE, 20” X 48” TABLE, S/N 9908143 (TRANSFORMER AND TO...
Featured lot
Lot 9
FIRST VERTICAL MILLING MACHINE, 3HP, HEIDENHAIN 3-AXIS DRO, 10” X 50” TABLE, SPEEDS TO 4,500 RPM (
FIRST VERTICAL MILLING MACHINE, 3HP, HEIDENHAIN 3-AXIS DRO, 10” X 50” TABLE, SPEEDS TO 4,500 RPM (RIGGING FEE $275)
Featured lot
Lot 13
FOBA GMBH FOBALAS 94 LASERMARKING SYSTEM / LASER ENGRAVER, MITUTOYO 2-AXIS DRO, S/N 98.0280 (RIGGING
FOBA GMBH FOBALAS 94 LASERMARKING SYSTEM / LASER ENGRAVER, MITUTOYO 2-AXIS DRO, S/N 98.0280 (RIGGING FEE $575)
Featured lot
Lot 15
HOSOI MACHINE WORKS LASER ENGRAVER W/ JDS UNIPHASE HELIUM NEON GAS LASER, NEWALL 3-AXIS DRO, S/N
HOSOI MACHINE WORKS LASER ENGRAVER W/ JDS UNIPHASE HELIUM NEON GAS LASER, NEWALL 3-AXIS DRO, S/N HC-450-172 (RIGGING FEE $950)
Featured lot
VERTICAL MILLING MACHINE - 1996 Birmingham BPV-3949C, 2-Axis DRO, 3HP/220/440v/3 - MACHINE IS UNDER POWER!
Featured lot
VERTICAL MACHINING CENTRE - 2016 MAXCUT, MCV-35100/RH-35, Axis Travel (XYZ): 100 in. x 33 in. x 27.95 in., RPM: 8000, Cutting Hours: 6920, Table S...
Featured lot
Lot 3
3rd AXIS VERTICAL MACHINING CENTRE - 2012 Mori Seiki Duravertical 1035 ECO - MACHINE IS UNDER POWER
33rd AXIS VERTICAL MACHINING CENTRE - 2012 Mori Seiki Duravertical 1035 ECO - MACHINE IS UNDER POWER
3rd AXIS VERTICAL MACHINING CENTRE - 2012 Mori Seiki Duravertical 1035 ECO, Axis Travel (XYZ): 40.7 in. x 22 in. x 20.1 in., RPM: 12,000, Cutting ...
Featured lot
VERTICAL MACHINING CENTRE - 2005 Mori Seiki Duracentre 5 (4th Axis Nikken Table), Axis Travel (XYZ): 31.5 in. x 20.1 in. x 20.1 in., RPM: 12,000, ...
Featured lot
HORIZONTAL MACHINING CENTRE - 2000 Mori Seiki SH-403 (4th Axis with Two Pallets), Axis Travel (XYZ): 22 in. x 20 in. x 20 in., RPM: 12,000, Cuttin...
Featured lot
VERTICAL MACHINING CENTRE - 2005 HAAS VF-2D, Axis Travel (XYZ): 30 in. x 16 in. x 20 in., RPM: 10,000, Cutting Hours: 3187, Table Size: 36 in. x 1...
Featured lot
HORIZONTAL MACHINING CENTRE - Hitachi Seiki HS 500 (Dual Pallet), Axis Travel (XYZ): 28.6 in. x 28.6 in. x 28.6 in., RPM -12,000 (New spindle 2021...
Featured lot
2015 CNC LASER CUTTING MACHINE – Jinan Senfeng Mod. 1325GL, Axis Travel (XYZ): 51 in. x 100 in. ? 2 in., Table Size: 60 in. x 136 in., Laser Power...
Featured lot
Lot 0B
2010 VOORTMAN V320C PLASMA PASS-THROUGH PLATE PROCESSOR, HYPERTHERM HYPERFORMANCE PLASMA HPR400XD
2010 VOORTMAN V320C PLASMA PASS-THROUGH PLATE PROCESSOR, HYPERTHERM HYPERFORMANCE PLASMA HPR400XD POWER SOURCE, VOORTMAN CNC CONTROL
Featured lot
Lot 0C
2010 TRUMPF TRUFLOW 5000 CO2 LASER, 5,000 WATT, 5’ X 10’, M/N 371510, S/N D0009A0233 W/ TRUMPF
2010 TRUMPF TRUFLOW 5000 CO2 LASER, 5,000 WATT, 5’ X 10’, M/N 371510, S/N D0009A0233 W/ TRUMPF LIFTMASTER
Loading...-
20 item(s)/page