Lot 100
2018 CAT 259D Skid Steer
-- Specifications -- Year: 2018.Make: Caterpillar.Model: 259D.Serial #: CAT0259DLFTL20317.Engine: Caterpillar C3.Fuel: Diesel.Horsepower: 74.Hours...
running machine
82 item(s)
- List
- Grid
-
82 item(s)/page
Lot 113
Komatsu D68EX Dozer
-- Specifications -- Year: na.Make: Komatsu.Model: D 68-E.Serial #: 01279.Engine: Komatsu.Fuel: Diesel.Horsepower: approx 170.Meter Reads: 1,559 h...
Lot 114
Terex D700A Dozer
-- Specifications -- Year: na.Make: Terex.Model: 82-20 AA.Serial #: 64654.Engine: VTwin 6 cylinder Detroit.Fuel: Diesel.Horsepower: approx 170 hp....
Lot 115
2017 Volvo ECR305CL Excavator
Update: Good working air conditioner. -- Specifications -- Year: 2017.Make: Volvo.Model: ECR305CL.Serial #: VCFCR305A00110747.Engine: Volvo.Fuel: ...
-- Specifications -- Year: 2015.Make: Caterpillar.Model: CB64.Serial #: CAT0CB64KCB500293.Engine: Cat C4.4 ACERT.HP: 130.Compaction Width: 84 inch...
Lot 119G
Prentice D210D Knuckleboom*
-- Specifications -- Year: Unknown.Make: Prentice.Model: D210D.Serial #: 210P52897.Engine: John Deere T06059T514420.Fuel: Diesel.Meter Reads: 1330...
-- Specifications -- Year: 2018.Make: Caterpillar.Model: CCS7.Serial #: CAT0CCS7A4B200122.Engine: Cat C3.4B.Hours: 4,421.HP: 100.Drum Diameter: 4....
Update: Good working air conditioner. -- Specifications -- Year: 2017.Make: John Deere.Model: 350G LC.Serial #: 1FF350GXKHF811837.Engine: John Dee...
1977 GARDNER 32" HORIZONTAL SPINDLE SPRING GRINDER 211 RUNNING HOURS 39836,
2007 KAESER AIR COMPRESSOR, MODEL SFC22 575 VOLT, S/N 1010, 83596 LOAD HRS.,104620 RUNNING HRS. MACHINE HAS BEEN REGULARLY SERVICED AND RECEIVED A...
Used Vestil DBA-130 Strapping Machine with: Serial No: 319762Model: DBA-130Running 8.5-inch RollOverall dimensions: Length: 39 inchesWidth:24 in...
Used Filmstar VFS Seal System with: Infeed: 4 inches 10.5 vertical seal bar 9.5 inch horizontal seal bar Last running: 15 inch wide Film Overall...
WATCH VIDEO MACHINE RUNNING - 32" PADS, 48" DIGGING BUCKET, 3RD VALVE, 4,041.3 HOURS, S/N: EC210V14659. STARTED, RAN AND OPERATED AT PREVIEW, NO B...
IWKA fully automatic continuous motion horizontal cartoner, model CPS-R Cartopack, capable of speeds up to 300 cpm, adjustable three chain machine...
Acme Gridley #RAN-6 9/16" Screw Machine S/N C-23193-N Toolslide/Stem Lift 0.003" Flat Tool Slide Air Stock Stop Universal Chip Conveyor 5 Drill Sa...
Acme Gridley #RAN-6 9/16" Screw Machine S/N 23523-N Toolslide / Stem Lift 0.0005" Back Finish Slide Assembly Flat Tool Slide Air Stock Stop Univer...
Acme Gridley #RA-6 1" Screw Machine S/N 23901 Toolslide/Stem Lift 0.0005" Flat ToolSlide No 5th Position Pocket c/o Assembly (Was Running a Watkin...
Acme Gridley #RA-6 1" Screw Machine S/N 23865 Toolslide/Stem Lift ~0.03" Nowak Chucks Angular Toolslide No 5th Position Pocket c/0 Assembly (Was ...
Haas VF-2YT 4-Axis CNC Vertical Machining Center, S/N 1123697 (New 2015), Table Size: 18" x 36", Travels: X-30"; Y-20"; Z-20", up to 8,100-RPM, 30...
Featured lot
Haas VF-2YT 3-Axis CNC Vertical Machining Center, S/N 1102210 (New 2013), Table Size: 18" x 36", Travels: X-30"; Y-20"; Z-20", up to 10,000-RPM, 3...
Haas VF-2YT 4-Axis CNC Vertical Machining Center, S/N 1102248 (New 2013), Table Size: 18" x 36", Travels: X-30"; Y-20"; Z-20", up to 10,000-RPM, 3...
LOC. 3 -- RAYMOND ORDER PICKER - MODEL 560OPC30TT (#4) - SER.# 560-12-a14973 - KEY HOURS 29,197 - HOURS ON DEADMAN SWITCH 14,956 - HOURS LIFTING ...
LOC. 3 -- RAYMOND ORDER PICKER - MODEL 560OPC30TT - SER.# 560-12-a15122 - KEY HOURS 28,464 - HOURS ON DEADMAN SWITCH 14,729 - HOURS LIFTING 1466 -...
LOC. 3 -- RAYMOND ORDER PICKER - MODEL 560OPC30TT (#2) - SER.# 560-12-a149732 - KEY HOURS 27,296 - HOURS ON DEADMAN SWITCH 14,355 - HOURS LIFTING...
LOC. 3 -- RAYMOND ORDER PICKER - MODEL 560OPC30TT - SER.# 560-12-A14673 - KEY HOURS 28,977 - HOURS ON DEADMAN SWITCH 14,747 - HOURS LIFTING 1491 -...
LOC. 3 -- RAYMOND ORDER PICKER - MODEL 560OPC30TT - SER.# 560-12-a13492 - KEY HOURS 30,169 - HOURS ON DEADMAN SWITCH 15,135 - HOURS LIFTING 1472 -...
Description: 2020 John Deere 60G compact excavator equipped with a long arm, angle blade, hydraulic thumb, and case drain. This 6-ton machine runs...
Description: 2012 John Deere 7280Ra powerhouse of performance and reliability. Featuring 280 horsepower and an Infinitely Variable Transmission (I...
Lot 49
RoGator RG1100C
Description: Selling a dependable RoGator RG1100C Self-Propelled Sprayer with 4,085 hours field tested and ready to roll. Equipped with Raven GPS...
Featured lot
63" Wide Dusenbery Model 835 duplex cantilevered slitter rewinder, Unwind diameter: 40", Unwind shafts: 3" & 6" diameter unwind shafts included. T...
Description: Kubota SVL95-2 Compact Track Loader a high-performance machine built for heavy-duty jobs. This unit features high flow hydraulics, p...
Lot 184
2021 Bobcat T64 Skid Steer
Make: Bobcat, Model: T64, Year: 2021,Runs and Drives, 1644 Hours, Enclosed Cab Equipped with Heat and AC, Rearview Camera, Radio in Cab, Hand and ...
Lot 12
Cat TH407C Telehandler
Description: 4000 lbs at max reach, 3300 lbs at max reach. Machine did run and perform as should. THERE ARE NO FORKS AVAILABLE. ONLY BUCKET.. Ther...
Description: LeeBoy 8510HD Paver currently showing 1 hour on the meter. The original hour meter was replaced due to a faded display but was last r...
30" Stanford Model 148 Doctor machine for running light film, 30" Dia. cantilevered unwind, 3" air shaft, Montalvo brake, Dancer, Oxy-Dry system M...
Pinnacle Converting Equipment Inc Versa SPR, Price new in 2021 was $566,000.00, Serial number: 20-324-00, The Versa-SPR is designed and built spec...
Description: Ditch Witch 6510 A620 trencher with 9046 hours. Equipped with a cable plow, backhoe attachment, trencher boom, and front blade-everyt...
Lot 54
2007 John Deere 4320 Cab 4wd
Description: Solid mid-size tractor with plenty of muscle! This John Deere 4320 comes equipped with 4-wheel drive, a front-end loader, and a comfo...
15" Chesnut, serial # 286, 1-color Model 150 laminator / printer, 2-roll rotogravure coating station or register print station with dry-bond lamin...
Age 2001. Serial # DT10014-01. Idlers in machine are 91" wide, 4" diameter. Single position unwind & single position center rewind, set up for 3" ...
Lot 119
1982 LeeBoy Motor Grader
Description: 1982 LeeBoy Motor Grader powered by a John Deere engine. The machine required a jump at the time of inspection but fired right up and...
Description: Willmar 4300 Wrangler loader. Starts, runs, and operates as it should. Equipped with an oil loader and ready for work. Serial number ...
Texwrap Mdl. T-205 SS Side seal orbital motion shrink wrapper w/ SERVO CONTROLLED SEAL JAW, PRECISE PRODUCT CONTROL THROUGH TRANSITION ZONES (VACU...
Lot 476
TEXWRAP # 2202 SS CONTINUOUS MOTION SIDE SEAL SHRINK WRAP SYSTEM W/ TEXWRAP # T-1322/2 DUAL CHAMBER
TEXWRAP # 2202 SS CONTINUOUS MOTION SIDE SEAL SHRINK WRAP SYSTEM W/ TEXWRAP # T-1322/2 DUAL CHAMBER SHRINK TUNNEL W/ ALLEN BRADLEY PLC CONTROL, SW...
Texwrap Mdl. T-205 SS Side seal orbital motion shrink wrapper w/ SERVO CONTROLLED SEAL JAW, PRECISE PRODUCT CONTROL THROUGH TRANSITION ZONES (VACU...
Lot 511
50" W HEAVY DUTY IN-LINE AUTOMATIC SHRINK BUNDLER SYSTEM W/ WELDOTRON #1250 BUNDLER AND #5016 TUNNEL
(2016) 50" W HEAVY DUTY IN-LINE AUTOMATIC SHRINK BUNDLER SYSTEM W/ WELDOTRON #1250 BUNDLER AND # 5016 TUNNEL. COMES EQUIPPED WITH AN EASY LOAD FIL...
2021 SHANKLIN F-1AC FW SIDE SEAL WRAPPER, THIS SYSTEM IS LIKE NEW MINT CONDITION. NEVER USED IN PRODUCTION (JUST FOR TESTING). COMES WITH COMPACT ...
63" Wide Dusenbery Model 835 L3 cantilevered slitter rewinder, Unwind diameter: 40", One pneumatic 3" diameter unwind shaft. The slitting section ...
Robert’s C1250 HFFS Stand Up Pouch Machine with zipper attachment: Currently running at 50 bags per minuteCurrent bag size: 7.87 inches wide x ...
Used Premade Bagging System with: JDA 430 stainless steel premade pouch bagger: Production speed: up 10 18 bags per minute depending on applicatio...
2018 DRY ICE CLEANING TRAILER, 20 FOOT, SULLAIR, COLD JET VIN: 16VGX2024K6062836 TRAILER 2018 BIG TEX 20 FOOT GOOSENECK MODEL 14GN-20BK GWR/PNBV:...
2009 Ditch Witch JT 2020 Mach 1 Boring Machine Location: Near Ringgold, GA Stock Number: JPW3829 Serial Number: J2020E90001020 Engine: Cummins B3...
VIN# 5SLBG1621AL005611 Any questions contact Josh 207-332-9144 or Josh@machinerymax.com EPA TIER 3 HOURS: 231 PERKINS 1106D-E70TTAG4 DIESEL ENGINE...
Emmegi "Phantomatic T3 Star" 4-Axis CNC Any questions contact Thomas Aronson 941-699-8717 or Thomas@Machinerymax.com Emmegi’s "Phantomatic T3 St...
Lot 109
RESINA CAPPER MACHINE
M/N UN30 1374, S/N 89-696, WITH STRAIGHT SECTION OF CONVEYOR RUNNING THROUGH MACHINE, WITH DRIVE (LOCATED IN ENGLISHTOWN, N.J.)
This machine was running when it was taken off line . All items pictured are included SPECIFICATIONS:TANK SIZE 41" x 30" x 22"TANK CAPACITY 52 Ga...
Lot 222
DESCRIPTION AUTOMATIC BOX TAPE MACHINE ADDITIONAL INFORMATION WAS BEING WORKED ON, NOT IN RUNNING OR
DESCRIPTION AUTOMATIC BOX TAPE MACHINEADDITIONAL INFORMATION WAS BEING WORKED ON, NOT IN RUNNING ORDER AT THE MOMENTLOCATION LOADING DOCKQTY 1
(New in Crates) 24 Head Rotary Labeling Machine - S/N 1420, Built to Run 1L and 1.75L Bottles
Lot 127
2003 VF-9B/40 CNC VERTICAL MACHINING CENTER, S/N 30658, TOOL CHANGES 142126, RUN TIME 22993 HRS,
2003 VF-9B/40 CNC VERTICAL MACHINING CENTER, S/N 30658, TOOL CHANGES 142126, RUN TIME 22993 HRS, 24+1 SIDE MOUNT ATC, CAT 40, PROGRAMMABLE COOLANT...
Lot 128
2011 HAAS VF-2 CNC VERTICAL MACHINING CENTER, S/N 1090959, TOOL CHANGES 202596, 5740 RUN HOURS, 7500
2011 HAAS VF-2 CNC VERTICAL MACHINING CENTER, S/N 1090959, TOOL CHANGES 202596, 5740 RUN HOURS, 7500 RPM, PROBING SYSTEM, AUTODOOR, 24+1 ATC, CAT4...
Loading...